Nokia 7260 User Manual

User’s Guide Nokia 7260

9231769

Issue 1

Under no circumstances shall Nokia be responsible for any loss of data or income or any special,

incidental, consequential or indirect damages howsoever caused.

The contents of this document are provided "as is". Except as required by applicable law, no warranties of

any kind, either express or implied, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or

contents of this document. Nokia reserves the right to revise this document or withdraw it at any time

without prior notice.

The availability of particular products may vary by region. Please check with the Nokia dealer nearest to

you.

Export Controls

This device may contain commodities, technology or software subject to export laws and regulations from

the US and other countries. Diversion contrary to law is prohibited.

9231769 / Issue 1

Contents

FFOR YOUR SAFETY.............................................................................................10

General information............................................................................................12

About your device .....................................................................................................................................12

Overview of the functions of the phone.............................................................................................12

Shared memory.......................................................................................................................................14

Nokia PC Suite software..........................................................................................................................14

Access codes...............................................................................................................................................15

Security code (5 to 10 digits).............................................................................................................15

PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN...........................................15

PUK and PUK2 codes (8 digits)...........................................................................................................16

Barring password (4 digits).................................................................................................................16

Wallet code (4 to 10 digits)................................................................................................................16

Network services........................................................................................................................................17

Configuration settings service ...........................................................................................................17

Downloading content and applications..............................................................................................18

Nokia support on the Web......................................................................................................................19

1.Getting started ................................................................................................20

Installing the SIM card and the battery..............................................................................................20

Charging the battery................................................................................................................................22

Switching the phone on and off...........................................................................................................23

Normal operating position......................................................................................................................24

Putting on a wrist strap...........................................................................................................................25

2.Your phone.......................................................................................................26

Keys and connectors.................................................................................................................................26

Standby mode.............................................................................................................................................28

Wallpaper.................................................................................................................................................29

Screen saver.............................................................................................................................................29

Power saving ...........................................................................................................................................30

Essential indicators................................................................................................................................30

Keypad lock (Keyguard) ...........................................................................................................................32

3.Call functions ..................................................................................................34

Making a call..............................................................................................................................................34

Speed dialling a phone number.........................................................................................................35

Answering or rejecting an incoming call............................................................................................35

Call waiting..............................................................................................................................................36

Options during a call................................................................................................................................36

4.Writing text.....................................................................................................38

Setting predictive text input on or off................................................................................................38

Using predictive text input.....................................................................................................................38

Writing compound words....................................................................................................................39

Using traditional text input....................................................................................................................39

Tips for writing text..................................................................................................................................40

5.Using the menu ...............................................................................................42

Accessing a menu function ....................................................................................................................42

List of menu functions.............................................................................................................................43

6.Menu functions...............................................................................................48

Messages......................................................................................................................................................48

Text messages (SMS).............................................................................................................................48

Flash messages .......................................................................................................................................53

Multimedia messages (MMS).............................................................................................................54

Instant messages (Chat).......................................................................................................................60

E-mail application .................................................................................................................................70

Voice messages.......................................................................................................................................74

Info messages..........................................................................................................................................75

Service commands.................................................................................................................................75

Deleting all messages from a folder.................................................................................................75

Message settings....................................................................................................................................76

Message counter....................................................................................................................................81

Call register.................................................................................................................................................81

Recent calls lists.....................................................................................................................................81

Counters and timers for calls, data and messages.......................................................................82

Contacts.......................................................................................................................................................83

Selecting settings for contacts ..........................................................................................................84

Saving names and phone numbers (Add contact)........................................................................84

Saving multiple numbers or text items per name ........................................................................85

Adding an image to a name or number in contacts....................................................................86

Searching for a contact........................................................................................................................87

Deleting contacts...................................................................................................................................87

Editing or deleting details ...................................................................................................................88

My presence.............................................................................................................................................89

Subscribed names ..................................................................................................................................91

Copying contacts....................................................................................................................................94

Sending and receiving a business card............................................................................................94

Speed dials...............................................................................................................................................95

Voice dialling...........................................................................................................................................96

Info numbers and service numbers...................................................................................................97

My numbers.............................................................................................................................................98

Caller groups ...........................................................................................................................................98

Settings.......................................................................................................................................................99

Profiles ......................................................................................................................................................99

Themes ................................................................................................................................................... 100

Tone settings........................................................................................................................................ 100

Personal shortcuts .............................................................................................................................. 101

Display settings.................................................................................................................................... 102

Time and date settings...................................................................................................................... 104

Call settings.......................................................................................................................................... 105

Phone settings ..................................................................................................................................... 107

Connectivity.......................................................................................................................................... 109

Enhancement settings....................................................................................................................... 112

Configuration settings....................................................................................................................... 113

Security settings.................................................................................................................................. 115

Restore factory settings.................................................................................................................... 116

Operator menu........................................................................................................................................ 116

Gallery........................................................................................................................................................ 117

Media......................................................................................................................................................... 119

Camera................................................................................................................................................... 119

Radio....................................................................................................................................................... 122

Voice recorder ...................................................................................................................................... 125

Organiser................................................................................................................................................... 126

Alarm clock........................................................................................................................................... 126

Calendar................................................................................................................................................. 127

To-do list ............................................................................................................................................... 130

Notes....................................................................................................................................................... 131

Synchronisation................................................................................................................................... 131

Applications ............................................................................................................................................. 133

Games and applications.................................................................................................................... 133

Calculator.............................................................................................................................................. 136

Countdown timer................................................................................................................................ 138

Stopwatch............................................................................................................................................. 138

Wallet..................................................................................................................................................... 140

Services...................................................................................................................................................... 144

Basic steps for accessing and using services .............................................................................. 145

Setting up the phone for a service................................................................................................. 145

Making a connection to a service.................................................................................................. 146

Browsing the pages of a service..................................................................................................... 147

Disconnect from a service ................................................................................................................ 148

Appearance settings of the browser.............................................................................................. 149

Cookies................................................................................................................................................... 149

Bookmarks............................................................................................................................................. 150

Downloading ........................................................................................................................................ 151

Service inbox........................................................................................................................................ 151

The cache memory.............................................................................................................................. 153

Browser security.................................................................................................................................. 153

SIM services............................................................................................................................................. 156

7.PC Connectivity ............................................................................................ 158

PC Suite..................................................................................................................................................... 158

(E)GPRS, HSCSD and CSD ................................................................................................................. 160

Using data communication applications......................................................................................... 160

8.Battery information...................................................................................... 161

Charging and Discharging.................................................................................................................... 161

CARE AND MAINTENANCE.............................................................................. 163

ADDITIONAL SAFETY INFORMATION.............................................................. 165

FOR YOUR SAFETY

Read these simple guidelines. Not following them may be dangerous or illegal. Read the

complete user guide for further information.

SWITCH ON SAFELY

Do not switch the phone on when wireless phone use is prohibited or when it

may cause interference or danger.

ROAD SAFETY COMES FIRST

Obey all local laws. Always keep your hands free to operate the vehicle while

driving. Your first consideration while driving should be road safety.

INTERFERENCE

All wireless phones may be susceptible to interference, which could affect

performance.

SWITCH OFF IN HOSPITALS

Follow any restrictions. Switch the phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Follow any restrictions. Wireless devices can cause interference in aircraft.

SWITCH OFF WHEN REFUELLING

Don't use the phone at a refuelling point. Don't use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Follow any restrictions. Don't use the phone where blasting is in progress.

USE SENSIBLY

Use only in the normal position as explained in the product documentation. Don't

touch the antenna unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair this product.

ENHANCEMENTS AND BATTERIES

Use only approved enhancements and batteries. Do not connect incompatible

products.

WATER-RESISTANCE

Your phone is not water-resistant. Keep it dry.

BACK-UP COPIES

Remember to make back-up copies or keep a written record of all important

information stored in your phone.

CONNECTING TO OTHER DEVICES

When connecting to any other device, read its user guide for detailed safety

instructions. Do not connect incompatible products.

EMERGENCY CALLS

Ensure the phone is switched on and in service. Press

as many times as

needed to clear the display and return to the start screen. Key in the emergency

number, then press . Give your location. Do not end the call until given

permission to do so.

General information

■ About your device

The wireless device described in this guide is approved for use on the EGSM 900,

GSM 1800 and GSM 1900 network. Contact your service provider for more

information about networks.

When using the features in this device, obey all laws and respect privacy and

legitimate rights of others.

Warning: To use any features in this device, other than the alarm clock,

the device must be switched on. Do not switch the device on when

wireless device use may cause interference or danger.

Your device and its enhancements may contain small parts. Keep them

out of the reach of small children.

For availability of approved enhancements, please check with your

dealer. When you disconnect the power cord of any enhancement, grasp

and pull the plug, not the cord.

■ Overview of the functions of the phone

The Nokia 7260 phone provide s many functions that are practical for daily use,

such as a calendar, a clock, an alarm clock, and a built-in camera. The camera can

be used for recording video clips and taking pictures that you can, for example,

attach as wallpaper in standby mode or as thumbnail pictures in Contacts. See

Camera on page 119. Personalise your phone with themes. See Themes on page

100.

Your phone supports

• EDGE (Enhanced Data ra tes for GSM Evolution), see (E)GPRS on page 110. EDGE

is a radio interface modulation technique which increases GRPS data rates.

• A multimedia messaging service (MMS) and is able to send and receive

multimedia messages composed of text, a picture, a sound clip and a video clip.

You can save the pictures, ringing tones or themes for personalising your

phone. See Multimedia messages (MMS) on page 54.

• xHTML browser that enables you to retrieve more colourful and richer

graphical content from web servers and to view it. See Services on page 144.

• An e-mail application to receive, read and send e-mails. See E-mail application

on page 70.

• Presence-enhanced contacts that enables you to conveniently share your

availability information with your colleagues, family and friends. See My

presence on page 89.

• Instant messages, which is a way of sending short text messages that are

delivered instantly to online users. See Instant messages (Chat) on page 60.

• Polyphonic sound (MIDI) that consists of several sound components played at

the same time. The phone has sound components from over 128 instruments,

but it can play up to 16 instruments at the same time. Polyphonic sounds are

used in ringing tones and message alert tones. The phone supports Scalable

Polyphonic MIDI (SP-MIDI) format.

• Java 2 Micro Edition, J2ME^TM, and includes some Java applications and games

that have been specially designed for mobile phones. You can download new

applications and games to your phone, see Applications on page 133.

Shared memory

The phone has three different memories. The following features in this device may

share the first memory: contacts, text messages, instant messages and SMS e-

mails, voice tags, calendar and notes. The second shared memory is used by

multimedia messages, files stored in Gallery and configuration settings. The third

shared memory is used by e-mail application, Java games and applications. Use of

one or more of these features may reduce the memory available for the remaining

features sharing the same memory. For example, saving many Gallery items may

use all of the available memory in the second memory. Your device may display a

message that the memory is full when you try to use a shared memory feature. In

this case, delete some of the information or entries stored in the corresponding

shared memory before continuing.

■ Nokia PC Suite software

With the Nokia PC Suite software you can, for example, manage the photos

captured with the phone’s camera and handle ringing tones and wallpapers. Nokia

PC Suite is available on Nokia’s Web site at www.nokia.com.

■ Access codes

Security code (5 to 10 digits)

The security code helps to protect your phone against unauthorised use. The pre-

set code is 12345. Change the code, and keep the new code secret and in a safe

place separate from your phone. To change the code, and to set the phone to

request the code, see Security settings on page 115.

If you key in an incorrect security code five times in succession, the phone ignores

further entries of the code. Wait for 5 minutes and key in the code again.

PIN and PIN2 codes (4 to 8 digits), Module PIN and Signing PIN

• The PIN (Personal Identification Number) code helps to protect your SIM card

against unauthorised use. The PIN code is usually supplied with the SIM card.

Set the phone to request the PIN code each time the phone is switched on, see

Security settings on page 115.

• The PIN2 code may be supplied with the SIM card and is required to access

some functions, such as call counters.

• The module PIN is required to access the information in the security module.

See Security module on page 153. The module PIN is supplied with the SIM

card if the SIM card has a security module in it.

• The signing PIN is required for the digital signature. See Digital signature on

page 155. The signing PIN is supplied with the SIM card if the SIM card has a

security module in it.

If you key in an incorrect PIN code three times in succession, the phone may

display PIN blocked or PIN code blocked, for example, and ask you to enter the PUK

code.

PUK and PUK2 codes (8 digits)

The PUK (Personal Unblocking Key) code is required to change a blocked PIN code.

The PUK2 code is required to change a blocked PIN2 code.

If the codes are not supplied with the SIM card, contact your local service provider

for the codes.

Barring password (4 digits)

The barring password is required when using the Call barring service, see Security

settings on page 115. You can obtain the password from your service provider.

Wallet code (4 to 10 digits)

The wallet code is required to access the wallet services. If you key in an incorrect

wallet code three times in succession, the wallet application is blocked for 5

minutes. The next three incorrect entries of the code will double the time. For

further information, see Wallet on page 140.

■ Network services

To use the phone you must have service from a wireless service provider. Many of

the features in this device depend on features in the wireless network to function.

These Network Services may not be available on all networks or you may have to

make specific arrangements with your service provider before you can utilize

Network Services. Your service provider may need to give you additional

instructions for their use and explain what charges will apply. Some networks may

have limitations that affect how you can use Network Services. For instance, some

networks may not support all language-dependent characters and services.

Your service provider may have requested that certain features be disabled or not

activated in your device. If so, they will not appear on your device menu. Contact

your service provider for more information.

This device supports WAP 2.0 protocols (HTTP and SSL) that run on TCP/IP

protocols. Some features of this device, such as multimedia messages, e-mail

application, instant messages, presence service, Java games and applications and

Internet services require network support for these technologies.

Configuration settings service

To use some of the network services, such as mobile Internet services, MMS,

Instant messages, E-Mail application, or Synchronisation, your phone needs the

correct configuration settings. You may receive the settings directly as a

configuration message and you need to save the settings on your phone. The

service provider may provide a PIN that is needed to save the settings. For more

information on the availability of the settings, contact your network operator,

service provider, nearest authorised Nokia dealer or visit the support area on the

Nokia website, www.nokia.com.

When you have received a configuration message Configuration sett. received is

displayed. To view the received settings, press Show.

• To save the received settings, press Save. If the phone asks Enter settings' PIN:,

key in the PIN code for the settings and press OK. Set these settings as the

default or not. For availability of the PIN code, contact the service provider

that supplies the settings.

• To discard the received settings, press Discard.

To view and edit the settings see Configuration settings on page 113.

■ Downloading content and applications

You may be able to download new content (for example images and video clips)

and applications into the phone (network service).

1. Select the download function for example in the Collection and Gallery menus.

To access the download function, see the respective menu descriptions.

A list of bookmarks is shown. Select More bookmarks if you want to view the

bookmarks available in the Services menu.

2. Select the bookmark of the browser page that you want to access. If the

connection fails, change the active set of connection settings in the Services

menu and try the connection again. Follow the instructions provided by the

service.

For the availability of different services, pricing and tariffs, contact your

network operator and/or the service provider.

Your device may have some bookmarks loaded for sites not affiliated with Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

■ Nokia support on the Web

Check <www.nokia.com/support> or your local Nokia Web site for the latest

version of this guide, additional information, downloads, and services related to

your Nokia product.

1. Getting started

■ Installing the SIM card and the battery

Keep all SIM cards out of the reach of small children. For availability and information on

using SIM card services, contact your SIM card vendor. This may be the service provider,

network operator, or other vendor.

Before removing the cover, always switch off the power and disconnect the charger

and any other device. Always store and use the device with the covers attached.

1. To remove the back cover of the phone:

Push the back cover release button (1) and

gently prise the back cover away from the

phone beginning at the bottom of the phone

(2).

2. Remove the battery by lifting

it as shown. Insert the SIM

card into the SIM card holder

until it snaps into position.

Make sure that the SIM card is

properly inserted and that the

golden contact area on the

card is facing downwards.

To remove the SIM card press the card release (1)

and slide the SIM card towards the top of the

phone (2).

3. Replace the battery. Observe the contacts of the

battery

4. Align the top of the back cover with the top of

the phone (1), press the bottom of the back

cover to lock it (2).

■ Charging the battery

Warning: Use only batteries, chargers, and enhancements approved by Nokia for

use with this particular model. The use of any other types may invalidate any

approval or warranty, and may be dangerous.

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from AC-1, ACP-7, ACP-8, ACP-12, LCH-9 or LCH-12

chargers.

1. Connect the lead from the charger to the socket

on the bottom of your phone.

2. Connect the charger to an AC wall socket.

The text Charging is displayed briefly if the phone

is switched on. If the battery is completely empty,

it may take a few minutes before the charging

indicator appears on the display or before any calls can be made.

You can use the phone while the charger is connected.

The charging time depends on the charger and the battery used. For example,

charging a battery with the AC-1 or ACP-12 charger takes approximately 1 hour

and 20 minutes while the phone is in standby mode.

■ Switching the phone on and off

Warning: Do not switch the phone on when wireless phone use is prohibited or

when it may cause interference or danger.

Press and hold the power key as shown.

Note that if the phone displays Insert SIM card even though the

SIM card is properly inserted, or SIM card not supported,

contact your network operator or service provider. Your phone

does not support 5-Volt SIM cards and the card may need to be

changed.

• If the phone asks for a PIN code, key in the PIN code (for

example, displayed as ****), and press OK.

See also PIN code request in Security settings on page 115 and Access codes on

page 15.

• If the phone asks for a security code, key in the security code (for example,

displayed as *****), and press OK.

See also Go to options on page 102.

5. The middle selection key in standby mode is Menu.

6. The right selection key in standby mode is Names to access the Contacts menu

or another shortcut to a function you can select. See Personal shortcuts on

page 101. Or the key has an operator-specific name to access an operator-

specific web site.

See also Essential indicators on page 30.

Wallpaper

You can set your phone to display a background picture, wallpaper, when the

phone is in standby mode. See Display settings on page 102.

Screen saver

You can set your phone to display a screen saver, when the phone is in standby

mode. See Display settings on page 102.

Power saving

For power saving, a digital clock view overwrites the display when

no phone function has been used for a certain period of time. Press

any key to deactivate the screen saver.

If you have not set the time, 00:00 is displayed. To set the time, see

Time and date settings on page 104.

In addition you can set a screen saver from Gallery. See Display settings on

page 102.

Essential indicators

You have received one or several text, picture messages or multimedia

messages. See Reading and replying to an SMS message or an SMS e-mail

on page 51 or Reading and replying to a multimedia message on page 58.

The phone has registered a missed call. See Call register on page 81.

Your phone is connected to the instant messages service and the

availability status is online or offline, respectively. See Connecting to and

disconnecting from the instant messaging service on page 63.

You have received one or several instant messages and you are connected

to the instant messages service. See Connecting to and disconnecting

from the instant messaging service on page 63.

The phone’s keypad is locked. See Keypad lock (Keyguard) on page 32.

The phone does not ring for an incoming call or text message when

Incoming call alert is set to Off and Message alert tone is set to Off. See

Tone settings on page 100.

The alarm clock is set to On. See Alarm clock on page 126.

The countdown timer is running. See Countdown timer on page 138.

The stopwatch is running in the background. See Stopwatch on page 138.

When the (E)GPRS connection mode Always online is selected and the

(E)GPRS service is available, the indicator is shown on the top left of the

display. Refer to (E)GPRS connection on page 111.

When the (E)GPRS connection is established, the indicator is shown on

the top left of the display. Refer to (E)GPRS connection on page 111 and

Browsing the pages of a service on page 147.

The (E)GPRS connection is suspended (on hold), for example if there is an

incoming or outgoing call during the (E)GPRS dial-up connection. The

indicator is shown on the top right of the display.

Infrared connection indicator, see Infrared on page 109.

All your calls are diverted to another number, Divert all voice calls. If you

have two phone lines, the divert indicator for the first line is

and for

the second line . See Call settings on page 105.

or If you have two phone lines, the indicator displays the selected phone line.

See Call settings on page 105.

The loudspeaker has been activated, see Options during a call on page 36.

Calls are limited to a closed user group. See Security settings on page 115.

The timed profile is selected. See Profiles on page 99.

A headset, handsfree, loopset or music stand is connected to the phone.

To set the phone to show the time and date in standby mode, see Time and date

settings on page 104.

■ Keypad lock (Keyguard)

You can lock the keypad to prevent the keys being accidentally pressed, for

example, when your phone is in your handbag.

• Locking the keypad

In standby mode, press Menu and then

within 1.5 seconds.

• Unlocking the keypad

Press Unlock and then

within 1.5 seconds.

To answer a call when the keyguard is on, press . During a call, the phone can

be operated normally. When you end or reject the call, the keypad will

automatically be locked.

For Automatic keyguard, see Phone settings on page 107.

For locking the keypad during a call, see Options during a call on page 36.

When the keypad lock is on, calls still may be possible to the official emergency number

programmed into your device.

3. Call functions

■ Making a call

1. Key in the phone number, including the area code. If you key in an incorrect

character, press Clear to delete it.

For international calls, press

twice for the international prefix (the +

character replaces the international access code) and then key in the country

code, the area code without the leading 0, if necessary, and the phone number.

2. Press

3. Press

to call the number.

to end the call or to cancel the call attempt.

See also Options during a call on page 36.

Making a call using the contacts

To search for a name/phone number that you have saved in Contacts, see

Searching for a contact on page 87. Press

to call the number.

Last number redialling

In standby mode, press

once to access the list of up to 20 numbers you last

called or attempted to call. Scroll to the number or name that you want, and press

to call the number.

Calling your voice mailbox

In standby mode, press and hold

, or press

and

If the phone asks for the voice mailbox number, key it in and press OK. See also

Voice messages on page 74.

Speed dialling a phone number

Before you can use speed dialling, assign a phone number to one of the speed-

dialling keys, from

either of the following ways:

• Press the speed-dialling key that you want and then press

, see Speed dials on page 95. Call the number in

• If Speed dialling is set to on, press and hold a speed-dialling key until the call is

started. See Call settings on page 105.

■ Answering or rejecting an incoming call

Press

to answer an incoming call and press

to end the call.

Press

to reject an incoming call.

If you press Silence, only the ringing tone is muted. Then either answer or reject

the call.

If a compatible headset supplied with the headset key is connected to the phone,

you can answer and end a call by pressing the key.

Tip: If the Divert if busy function is activated to divert the calls, for

example to your voice mailbox, rejecting an incoming call will also divert

the call. See Call settings on page 105.

Note that when somebody is calling you, the phone shows the caller’s name,

phone number or the text Private number or Call. If more than one name is found

in Contacts with the same last seven digits of the phone number as the caller’s

number, only the phone number will be displayed, if this is available. The phone

may display an incorrect name, if the caller’s number is not saved in Contacts but

there is another name saved with the same last eight digits in the phone number

as in the phone number of the caller.

Call waiting

During a call, press to answer the waiting call. The first call is put on hold. Press

to end the active call.

To activate the Call waiting function, see Call settings on page 105.

■ Options during a call

Many of the options that you can use during a call are network services. For

availability, contact your network operator or service provider.

Press Options during a call for some of the following options:

•

Mute or Unmute, Contacts, Menu, Record, and the network services Answer

and Reject, Hold or Unhold, New call, End call, End all calls.

•

Lock keypad to activate the keypad lock.

Send DTMF to send DTMF (Dual Tone Multi-Frequency) tone strings, for

example, passwords or bank account numbers (network service). The DTMF

system is used by all touch-tone telephones. Key in the DTMF string or search

for it in Contacts and press DTMF. Note that you can key in the wait character

w and the pause character p by repeatedly pressing

•

Swap to switch between the active call and the call on hold, Transfer to

connect a call on hold to an active call, and disconnect yourself from both calls

(network services).

•

Conference to call another party and invite them into the call (network

service).

Private call to have a private conversation with one participant in a conference

call (network service).

Auto volume on or Auto volume off. Automatic volume controls the earpiece

volume level according to the environment noise level.

Loudspeaker to use the integrated loudspeaker during a call to have the

handsfree function of your phone.

Note: Do not hold the device near your ear when the loudspeaker is in

use, because the volume may be extremely loud.

To activate/deactivate the loudspeaker, select Loudspeaker/Handset or press

Loudsp./Normal. The loudspeaker is automatically deactivated when you end

the call or call attempt or connect the handsfree unit or headset to the phone.

If you have connected a compatible handsfree unit or the headset to the

phone, Handset in the options list is replaced with Handsfree or Headset and

the selection key Normal with Handsf. or Heads., respectively.

Using the loudspeaker with the radio, see Using the radio on page 123.

4. Writing text

You can key in text, for example, when writing messages, using traditional or

predictive text input.

When you are writing text, predictive text input is indicated by

and

traditional text input by

indicated by

at the top left of the display. The character case is

, or next to the text input indicator. You can

change the character case by pressing

. The number mode is indicated by

, and you can change between the letter and number mode by pressing and

holding

■ Setting predictive text input on or off

When writing text, press Options and select Dictionary.

• To set predictive text input on, select a language in the dictionary options list.

Predictive text input is only available for the languages on the list.

• To revert to traditional text input, select Dictionary off.

Tip: To quickly set predictive text input on or off when writing text, press

twice, or press and hold Options.

■ Using predictive text input

You can key in any letter with a single keypress. Predictive text input is based on a

built-in dictionary to which you can also add new words.

1. Start writing a word using the keys

. Press each key only once

for a single letter. The word changes after each keystroke.

Example: To write Nokiawhen the English dictionary is selected, press

and

For more instructions on writing text, see Tips for writing text on page 40.

2. When you have finished writing the word and it is correct, confirm it by adding

a space with

or by moving the joy stick up, down, left or right. Moving

the joystick also moves the cursor.

If the word is not correct, press

repeatedly or press Options and select

Matches. When the word that you want appears, confirm it.

If the ? character is displayed after the word, the word you intended to write is

not in the dictionary. To add the word to the dictionary, press Spell, key in the

word (traditional text input is used) and press Save. When the dictionary

becomes full, the new word replaces the oldest one that was added.

3. Start writing the next word.

Writing compound words

Key in the first part of the word and move the joystick to the right, then write the

last part of the word.

■ Using traditional text input

Press a number key,

, repeatedly until the desired character

appears. Not all characters available under a number key are printed on the key.

The characters available depend on the language selected in the Phone language

menu, see Phone settings on page 107.

• If the next letter you want is located on the same key as the present one, wait

until the cursor appears, or move the joystick up, down, left or right and then

key in the letter.

•

The most common punctuation marks and special characters are available

under the number key

For more instructions on writing text, see Tips for writing text on page 40.

■ Tips for writing text

The following functions may also be available for writing text:

• To insert a space, press

• Move the cursor to the left, right, down or up with the joystick.

• To insert a number while in letter mode, press and hold the desired number key.

• To delete a character to the left of the cursor, press Clear. Press and hold Clear

to delete the characters more quickly.

To delete all the characters at once when writing a message, press Options and

select Clear text.

• To insert a word when using predictive text input, press Options and select

Insert word. Write the word using traditional text input and press Save. The

word is also added to the dictionary.

• To insert a special character when using traditional text input, press

, or

when using predictive text input, press and hold

, or press Options and

select Insert symbol.

Use the joystick to scroll to a character and press Use to select the character.

You can also scroll to a character by pressing or , and

select the character by pressing

• To insert a smiley when using traditional text input, press

twice, or when

again, or press

using predictive text input, press and hold

and press

Options and select Insert smiley.

Use the joystick to scroll to a smiley and press Use to select the smiley.

You can also scroll to a character by pressing or

select the character by pressing

The following options are available when writing text messages:

• To insert a number while in letter mode, press Options and select Insert

, and

number. Key in the phone number or search for it in Contacts and press OK.

• To insert a name from Contacts, press Options and select Insert contact. To

insert a phone number or a text item attached to the name, press Options and

select View details.

5. Using the menu

The phone offers you an extensive range of functions, which are grouped into

menus. Most of the menu functions are provided with a brief help text. To view

the help text, scroll to the menu function you want and wait for 15 seconds. To

exit the help text, press Back. See Phone settings on page 107.

■ Accessing a menu function

1. To access the menu, press Menu.

2. Use the joystick to scroll through the menu and select, for example, Settings by

pressing Select. To change the menu view, see Menu view in Display settings

on page 102.

3. If the menu contains submenus, select the one that you want, for example Call

settings.

4. If the selected submenu contains further submenus, repeat step 3. Select the

next submenu, for example Anykey answer.

5. Select the setting of your choice.

6. Press Back to return to the previous menu level, and Exit to exit the menu.

■ List of menu functions

• Messages

4. Inbox

5. Other folders

8. Voice messages

1. Create message

1. Text message

1. Listen to voice messages

2. Voice mailbox number

2. Multimedia msg.

3. Flash message

9. Info messages

1. Info service

2. Topics

2. Inbox

3. Outbox

4. Sent items

5. Saved items

1. Text messages

2. Multimedia msgs.

6. Instant messages

1. Login

2. Saved convers.

3. Connect. settings

7. E-mail

1. Create e-mail

2. Retrieve

3. Language

4. Info topics saved

on SIM card

5. Read

10.Service commands

11.Delete messages

12.Message settings

1. Text messages

2. Multimedia msgs.

3. E-mail messages

4. Other settings

3. Disconnect

1. In some countries this function may not be available.

2. This menu is shown only if any info messages are received.

• Call register

1. Missed calls

7. GPRS connection timer

1. Duration of last session

2. Duration of all sessions

3. Clear timers

2. Received calls

3. Dialled numbers

4. Delete recent call lists

1. All

2. Missed

3. Received

4. Dialled

• Contacts

1. Search

2. Add new contact

3. Delete

4. My presence

5. Subscribed names

6. Copy

5. Call duration

1. Last call duration

2. Received calls' duration

3. Dialled calls' duration

4. All calls' duration

5. Clear timers

7. Settings

1. Memory in use

2. Contacts view

3. Memory status

6. GPRS data counter

1. Data sent in last session

2. Data received in last session

3. All sent data

4. All received data

5. Clear counters

8. Speed dials

9. Voice tags

10.Info numbers

11.Service numbers¹

12.My numbers

13.Caller groups²

1. Shown if supported by your SIM card. For availability, contact your network operator or serv-

ice provider.

2. If Info numbers, Service numbers or both are not supported, the number of this menu item

changes accordingly.

• Settings

4. Voice commands

5. Display settings

1. Wallpaper

1. Profiles

1. General

2. Screen saver

3. Colour schemes

4. Menu view

5. Operator logo

6. Time and date settings

1. Clock

2. Silent

3. Meeting

4. Outdoor

5. My style 1

6. My style 2

2. Themes

1. Select theme

2. Theme downloads

2. Date

3. Auto-update of date & time

7. Call settings

3. Tone settings

1. Automatic volume control

2. Call divert

1. Incoming call alert

2. Ringing tone

3. Anykey answer

4. Automatic redial

5. Speed dialling

3. Ringing volume

4. Vibrating alert

5. Message alert tone

6. Instant message alert tone

7. Keypad tones

8. Warning tones

9. Alert for

6. Call waiting

7. Summary after call

8. Send my caller ID

9. Line for outgoing calls

8. Phone settings

4. Personal shortcuts

1. Phone language

2. Automatic keyguard

3. Cell info display

1. Right selection key

2. Select 'Go to' options

3. Organise 'Go to' options

1. For availability, contact your network operator or service provider.

4. Welcome note

2. Call barring service

3. Fixed dialling

4. Closed user group

5. Security level

5. Operator selection

6. Confirm SIM service actions

7. Help text activation

8. Start-up tone

6. Access codes

9. Connectivity

1. Infrared

2. GPRS

13.Restore factory settings

• Operator menu

• Gallery

1. Images

10.Enhancement settings

1. Headset

2. Handsfree

3. Loopset

2. Video clips

3. Themes

11.Configuration settings

1. Default configuration settings

2. Activate default in all

applications

3. Preferred access point

4. Personal configuration

settings

4. Graphics

5. Tones

6. Recordings

• Media

1. Camera

2. Radio

3. Voice recorder

12.Security settings

1. PIN code request

1. This menu is shown only if the phone is or has been connected to a compatible enhancement

available for the phone.

2. If this menu is not shown the subsequent menu numbers changes accordingly. The name de-

pends on the network operator.

• Organiser

4. Wallet

• Services

1. Alarm clock

1. Alarm time

2. Repeat alarm

3. Alarm tone

1. Home

2. Bookmarks

3. Download links

1. Tone downloads

2. Graphic downloads

3. Game downloads

4. Video downloads

5. Theme downloads

6. App. downloads

4. Last web addr.

5. Service inbox

6. Settings

2. Calendar

3. To-do list

4. Notes

5. Synchronisation

• Applications

1. Games

1. Select game

2. Game downloads

3. Memory

1. Configuration settings

2. Appearance settings

3. Security settings

4. Service inbox settings

4. App. settings

2. Collection

1. Select application

2. App. downloads

3. Memory

7. Go to address

8. Clear the cache

3. Extras

1. Calculator

2. Countdown timer

3. Stopwatch

• SIM services

1. Only shown if supported by your SIM card. The name and contents vary depending on the SIM

card.

6. Menu functions

■ Messages

The message services can only be used if they are supported by

your network or your service provider.

You can read, write, send and save text, multimedia and SMS

e-mail messages (network services). All messages are organised into folders.

To select the font size for reading and writing messages, press Menu, and select

Messages, Message settings, Other settings and Font size.

Note: When sending messages, your phone may display the words Message sent.

This is an indication that the message has been sent by your device to the message

centre number programmed into your device. This is not an indication that the

message has been received at the intended destination. For more details about

messaging services, check with your service provider.

Text messages (SMS)

Using the SMS (Short Message Service) your phone can send and receive multi-

part messages, which consist of several ordinary text messages (network service).

Invoicing may be based on the number of ordinary messages that are required for

a multi-part message. This may affect the invoicing for the message.

Before you can send a message, you need to save some message settings. See

Settings for text and SMS e-mail messages on page 76.

You can also send and receive text messages that contain pictures. A picture

message can be a multi-part message.

Note: Only devices that offer picture message features can receive and display

picture messages.

The text messages function uses shared memory, see Shared memory on page 14.

Writing and sending messages

Your device supports the sending of text messages beyond the normal 160-character limit. If

your message exceeds 160 characters, it will be sent as a series of two or more messages.

The number of available characters / the current part number of a multi-part message are

shown on the top right of the display, for example 120/2. Note that using special (Unicode)

characters such as ë, â, á, ì take up more space.

1. Press Menu, and select Messages, Create message and Text message.

Tip: To start writing messages quickly, move the joystick to the left in

standby mode.

2. Key in a message. See Writing text on page 38. To insert text templates or a

picture into the message, see Templates on page 52. Each picture message

comprises several text messages. Therefore, sending one picture message, as

well as other multipart messages may cost more than sending one text

message.

3. To send the message, press Send or

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes. See Settings for text and SMS e-mail

messages on page 76. Text messages are indicated with

4. Enter the recipient’s phone number or search for the phone number in

Contacts. Press OK to send the message.

Options for sending a message

After you have written a message, press Options and select Sending options.

• To send a message to several recipients, select Send to many. When you have

sent the message to everyone you want to send it to, press Done. Note that a

separate message is sent to each of the recipients.

• To send a message as an SMS e-mail (network service), select Send as e-mail.

Key in the recipient’s e-mail address or search for it in Contacts and press OK.

If you wish, you can key in a subject for the SMS e-mail and press OK.

Key in the e-mail message. See Writing text on page 38. The total number of

characters that you can key in is shown on the top right of the display. The e-

mail address and subject are included in the total number of characters.

See also Templates on page 52. Pictures cannot be inserted.

To send the SMS e-mail, press Send. If you have not saved the settings for

sending SMS e-mails, the phone asks for the number of the e-mail server.

Press OK to send the e-mail.

• To send a message using a message profile, select Sending profile and then the

desired message profile.

To define a message profile, see Settings for text and SMS e-mail messages on

page 76.

Reading and replying to an SMS message or an SMS e-mail

When you have received a message or an SMS e-mail, the indicator

number of new messages followed by messages received are shown.

and the

The blinking

indicates that the message memory is full. Before you can receive

new messages, delete some of your old messages in the Inbox folder.

1. Press Show to view the new message, or press Exit to view it later.

Reading the message later:

Press Menu, and select Messages and Inbox.

2. If more than one message has been received, select the one that you want to

read. An unread text message or SMS e-mail is indicated by

Options while reading the message:

Press Options and select an option, for example, to delete, forward or edit the

message as a text message or an SMS e-mail, rename the message you are

reading or to move it to another folder.

Select Copy to calendar to copy text at the beginning of the message to your

phone’s calendar as a reminder note for the current day.

Select Message details to view, if available, the sender’s name and phone

number, the message centre used, and the date and time of receipt.

Select Use detail to extract numbers, e-mail addresses and website addresses

from the current message.

Tip: While reading a message, press the

key to extract numbers, e-

mail addresses and website addresses from the current message.

When reading a picture message, select Save picture to save the picture in the

Templates folder.

3. Select Reply and the message type to reply to a message.

When replying to an SMS e-mail, confirm or edit the e-mail address and

subject first. Then write your reply message.

4. To send the message, press Send, and press OK to send the message to the

displayed number.

Inbox and sent items folders

The phone saves incoming text and multimedia messages in the Inbox folder.

Sent text messages are saved in the Sent items folder.

Text messages that you wish to send later can be saved in the Saved text msgs.,

My folders or Templates folder.

Templates

Your phone includes text templates, indicated by , and picture templates,

indicated by

To access the template list, press Menu, and select Messages, Saved items, Text

messages and Templates.

• To insert a text template into the message or the SMS e-mail that you are

writing or replying to, press Options. Select Use template and select the

template that you want to insert.

• To insert a picture into the text message that you are writing or replying to,

press Options. Select Insert picture and select a picture to view it. Press Insert

to insert the picture into your message. The

indicator in the header of the

message indicates that a picture has been attached. The number of characters

that you can enter in a message depends on the size of the picture.

To view the text and the picture together before sending the message, press

Options and select Preview.

Saved items folder and My folders

To organise your messages, you can move some of them to the Saved items folder,

or add new folders for your messages.

While reading a message, press Options. Select Move, scroll to the folder that you

want to move the message to and press Select.

To add or delete a folder, press Menu, and select Messages, Saved items, Text

messages and My folders.

• To add a folder if you have not saved any folder, press Add. Otherwise, press

Options and select Add folder.

• To delete a folder, scroll to the folder that you want to delete, press Options

and select Delete folder.

Flash messages

Flash messages are text messages that are displayed instantly.

Writing a flash message

Press Menu, and select Messages, Create message and Flash message. For further

operation, see Writing and sending messages on page 49. The maximum length of

a flash message is 70 characters. To insert a blinking text into the message, select

Insert blink char. from the options list to set a marker. The text behind the marker

blinks until a second marker is inserted.

Note: Only devices that offer compatible flash message features can receive and

display blinking flash messages.

Receiving a flash message

A received flash message is not automatically saved. To read the message, press

Read. Press Options and select Use detail to extract phone numbers, e-mail

addresses and website addresses from the current message. To save the message,

press Save and select the folder in which you want to save the message.

Multimedia messages (MMS)

Note: Only devices that offer compatible multimedia message features can receive

and display multimedia messages.

A multimedia message can contain text, sound and a picture or a video clip. The

phone supports multimedia messages that are up to 100 KB in size. If the

maximum size is exceeded, the phone may not be able to receive the message.

Depending on the network, you may receive a text message that includes an

Internet address where you can view the multimedia message.

If the message contains a picture in compatible format, the phone may scale it

down to fit the display area.

The multimedia message function uses shared memory, see Shared memory on

page 14.

If Allow multimedia reception is set to Yes or In home network, your operator or

service provider may charge you for every message you receive. The default setting

to receive multimedia messages is generally on. See Settings for multimedia

messages on page 77.

Multimedia messaging supports the following formats:

• Picture: JPEG, GIF, WBMP, BMP and PNG.

• Sound: Scalable Polyphonic MIDI (SP-MIDI), AMR audio and monophonic

ringing tones.

• Video clips in 3gp format with SubQCIF and QCIF resolution and AMR audio.

The phone does not necessarily support all variations of the aforementioned file

formats. If a received message contains any unsupported elements, they may be

replaced with the file name and the text Object format not supported.

Note that you are not able to receive any multimedia messages if you have a call

in progress, or a game or another Java application running. Because delivery of

multimedia messages can fail for a variety of reasons, do not rely solely upon them

for essential communications.

Writing and sending a multimedia message

To set the settings for multimedia messaging, see Settings for multimedia

messages on page 77. To check availability and to subscribe to the multimedia

messaging service, contact your network operator or service provider.

from being copied, modified, transferred or forwarded.

1. Press Menu, and select Messages, Create message and Multimedia msg..

2. Key in a message. See Writing text on page 38.

• To insert a file in the message, press Options, select Insert and select the

desired option. You cannot select an option if it is dimmed. The list of

available folders in the Gallery is shown. Open a specific folder, scroll to the

desired file, press Options and select Insert. An attached file is indicated

with the file name in the message. Please note that you cannot insert a

theme in a new message.

To move the text component to the top or bottom of the message, press

Options and select Place text first or Place text last.

• Your phone supports the sending and receiving of multimedia messages

that contain several pages (slides). To insert a slide in the message, press

Options, and select Insert and Slide. Each slide can contain text, one image

and one sound clip.

If the message contains several slides, you can open the desired one by

pressing Options and selecting Previous slide, Next slide or Slide list.

To change the time a slide will be displayed in a slide presentation select

the slide, press Options and select Slide timing. To change the default value

see Default slide timing in Settings for multimedia messages on page 77.

• To insert a name from the contacts list, press Options and select More

options, Insert contact and the desired name.

To insert a number from the contacts list, press Options and select More

options and Insert number.

• To insert a calendar note, press Options and select Insert and Calendar

note.

• To insert a business card, press Options and select Insert and Business card.

• To delete an image, slide or sound clip from the message, press Options and

select Delete and the desired function.

• To save the message in the Saved items folder, press Options and select

Save message.

• To add a subject to the message, press Options and select More options and

Edit subject.

• To view for example the size or recipient of the message, press Options and

select More options and Message details.

3. To view the message or slide presentation before sending it, press Options and

select Preview.

4. To send the message, press Send, or press Options and select Send to e-mail or

Send to many.

5. Enter the recipient’s phone number (or e-mail address) or search for it in

Contacts. Press OK and the message is moved to the Outbox folder for sending.

It takes more time to send a multimedia message than to send a text message.

While the multimedia message is being sent, the animated indicator

displayed and you can use other functions on the phone. If there is an

interruption while the message is being sent, the phone tries to resend it a few

times. If this fails, the message will remain in the Outbox folder and you can try

to resend it later.

The messages that you have sent will be saved in the Sent items folder if the

setting Save sent messages is set to Yes. See Settings for multimedia messages

on page 77. Multimedia messages are indicated with

Reading and replying to a multimedia message

Important: Multimedia message objects may contain viruses or otherwise be

harmful to your device or PC. Do not open any attachment if you are not sure of

the trustworthiness of the sender.

When your phone is receiving a multimedia message, the animated indicator

is displayed. When the message has been received, the indicator

and the text

Multimedia message received are shown.

The blinking

indicates that the memory for multimedia messages is full, see

Multimedia messages memory full on page 60.

The appearance of a multimedia message may vary depending on the receiving device.

1. Press Show to view the message, or press Exit to view it later.

Reading the message later: Press Menu, and select Messages and Inbox. An

unread multimedia message is indicated by

2. Scroll to view the message. Press Options and, for example, some of the

following options may be available.

•

Play presentation to view the presentation attached in the message.

View text to view only the text in the message.

Open image, Open sound clip or Open video clip to open the corresponding

file.

•

Save image, Save sound clip or Save video clip to save the corresponding file

in the Gallery.

•

Details to view the details of the attached file.

Delete message to delete a saved message.

Reply or Reply to all to reply to the message. To send the reply, press

Options and select Send.

•

Forward to no., Forward to e-mail or Forward to many to forward the

message.

Edit to edit a message. You can only edit messages you have created. See

Writing and sending a multimedia message on page 55.

Message details to view the subject, size and the type of message.

• Refer also to the options in Gallery, see Gallery on page 117.

Inbox, Outbox, Saved and Sent items folders

The phone saves the multimedia messages that have been received in the Inbox

folder.

Multimedia messages that have not yet been sent are moved to the Outbox folder.

The multimedia messages that you wish to send later can be saved in the Saved

items folder.

The multimedia messages that have been sent are saved in the Sent items folder of

the Multimedia msgs. submenu if the setting Save sent messages is set to Yes. See

Settings for multimedia messages on page 77.

Multimedia messages memory full

When you have a new multimedia message waiting and the memory for the

messages is full, the indicator

blinks and Multimedia memory full, view

waiting msg. is shown. To view the waiting message, press Show. To save the

message, press Options, select Save message and delete old messages by first

selecting the folder and then the oId message to be deleted.

To discard the waiting message, press Exit and Yes. If you press No, you can view

the message.

Instant messages (Chat)

Instant messaging (Chat) is a way of sending short, simple text messages that are

delivered over TCP/IP protocols to online users (network service). Your contact list

shows you when the contacts on the list are online and available to participate in

an instant messages conversation. When you have written and sent your message,

it stays on the display. The reply message appears below your original message.

Before you can use instant messaging, you need to subscribe to the service. For

availability, charging and subscription to the service, contact your network

operator or service provider, from whom you also receive your unique ID and

password and the settings for instant messaging. For setting the required settings

for the instant messaging service, see Instant messaging settings on page 69.

The icons and texts on the display may vary depending on the instant messaging

service.

You can use the other functions of the phone while you have an active instant

messaging session in the background. Depending on the network, the active

instant messaging session may consume the phone’s battery faster and you may

need to connect the phone to a charger.

Instant messaging uses shared memory, see Shared memory on page 14 .

Basic steps for the instant messaging

• To enter the instant messaging menu (offline), see Entering the instant

messaging menu on page 62.

• To connect to the service (online), see Connecting to and disconnecting from

the instant messaging service on page 63.

• To start a conversation with a contact, see IM contacts in Starting an instant

messaging conversation on page 63.

To create your own contact lists, see Contacts for instant messaging on page

67.

• To join a public group, see Groups in Starting an instant messaging

conversation on page 63.

To join an instant messaging group via an invitation message, see Accepting or

rejecting an invitation on page 64.

To create your own group, or to join or delete a public group, see Groups on

page 68.

• To edit your own information, see Editing your own settings on page 66.

• To search users and groups, see Search in Starting an instant messaging

conversation on page 63.

• To read a message, see Reading an instant message on page 65.

• To write and send messages during an active session, see Participating in a

conversation on page 66.

• To view, rename or delete saved conversations, select Saved convers. when you

have entered the Instant messages menu.

• To block/unblock contacts, see Blocking and unblocking messages on page 68.

• To disconnect from the service, see Connecting to and disconnecting from the

instant messaging service on page 63.

Entering the instant messaging menu

To enter the Instant messages menu while still offline, press Menu, and select

Messages and Instant messages. Activate a service and then select

•

To set the phone to automatically connect to the service when you enter the

Instant messages menu, see Connecting to and disconnecting from the instant

messaging service on page 63.

•

Saved convers. to view, erase or rename the conversations that you have saved

during a session. You can select Saved convers. also when you have connected

to the service.

Connect. settings to access the settings needed for a connection. See Instant

messaging settingson page 69. You can select Connect. settings also when you

have connected to the service.

Connecting to and disconnecting from the instant messaging service

To connect to the service, enter the Instant messages menu, activate a service and

select Login. Select one of the available sets. If necessary key in the User ID: and

the Password:. When the phone has successfully connected, Logged in is displayed.

Tip: To set the phone to automatically connect to the instant messaging

service when you enter the Instant messages menu, connect to the service,

select My settings, Automatic login and On IM start-up.

To disconnect from the service, select Logout.

Starting an instant messaging conversation

Enter the Instant messages menu and connect to a service. You can select

•

Conversations to view the list of new and read messages or invitations to

instant messaging during the active session. Scroll to the message or invitation

that you want and press Open to read the message.

indicates the new and

indicates the invitations.

the read instant messages.

the read group messages.

•

IM contacts includes the contacts that you have added. Scroll to the contact to

whom you would like to send instant messages and press Chat or press Open if

a new message is shown in the list.

If you have received a new message from a contact, it is indicated with

indicates the online and the offline contacts in the phone’s contacts

memory.

indicates a blocked contact, refer to Blocking and unblocking messages on

page 68.

To add contacts to the list, see Contacts for instant messaging on page 67.

•

Groups and Public groups. The list of bookmarks to public groups provided by

the network operator or service provider is displayed. To start a conversation,

scroll to a group and press Join. Enter the screen name that you want to use in

the conversation. When you have successfully joined in the group

conversation, the phone shows Joined group: and the group name. To create a

private group, see Groups on page 68.

Search and select Users or Groups to search for other users or public groups on

the network.

• If you select Users, you can search for a user by phone number, screen

name, e-mail address or name.

• If you select Groups , you can search for a group by a member in the group

or by group name, topic or ID.

To start the session when you have found the user or the group that you want,

press Options and select Chat or Join group.

• To start a session from Contacts, see Viewing the subscribed names on page

92.

Accepting or rejecting an invitation

In standby mode, when you have connected to the service and you receive a new

invitation, New invitation received is displayed. Press Read to read it.

If more than one invitation is received, the number of messages followed by new

invitations received is displayed. Press Read, scroll to an invitation that you want

and press Open.

• To join the private group conversation, press Accept. Enter the screen name

that you want to use as a nickname. When you have successfully joined the

group, the phone shows Joined group: and the group name.

• To reject or delete the invitation, press Options and select Reject or Delete.

Reading an instant message

In standby mode, when you have connected to the service and you receive a

message from a person who is not taking part in the conversation, New instant

message is displayed. Press Read to read it.

If more than one message is received, the number of messages followed by new

instant messages is displayed. Press Read, scroll to a message and press Open.

New messages received during an active session are held in the Conversations of

the Instant messages menu. If the message is from a person whose contact

information is missing from the contact list in IM contacts, the sender’s ID is

shown. If the contact information can be found in the phone’s memory for

contacts and the phone recognises it, the sender’s name is shown. To save a new

contact in the phone’s memory, press Options and select

•

Save contact and enter the name of the person.

Add to contact and select the contact to which you want to add the detail and

press Add.

Participating in a conversation

Join or start a session by pressing Write.

Tip: If you receive a new message during a conversation from a person that

is not within the active conversation, the indicator

is shown on the

top of the display and a alarm tone is played.

Write your message and press Send or to send it. If you press Options, some of

the following options are available:

•

View conversation to view the ongoing conversation. To save the conversation,

press Save and enter a name for the conversation.

•

Save contact, refer to Reading an instant message on page 65.

Add to contact, refer to Reading an instant message on page 65.

Group members to view the members of the selected private group. The option

is only shown if you have created the group.

•

End conversation to end the ongoing conversation.

Dictionary refer to Writing text on page 38.

Editing your own settings

Enter the Instant messages menu and connect to the service. Select My settings to

view and edit your own availability information or screen name. Select Availability

and Available for all or Avail. for contacts (or Appear offline) to allow all the other

users or only the contacts on your contact list to see that you are online when you

have connected to the service. When you are connected to the service,

indicates that you are online and

that you are not visible to others.

Contacts for instant messaging

To add contacts to the instant messaging contacts list, connect to the service and

select IM contacts.

If the contacts list is empty the phone displays Contact list empty. Copy contacts

from server? to retrieve available contacts from the server.

Otherwise press Options and select Add contact, or if you have no contacts added,

press Add. Select

•

Enter ID manually to enter the ID manually.

Search from serv. to search for a contact from the server.

From contacts to search for a name in Contacts.

Copy from server to copy a name from a server-based contacts list.

When the contact is added, the phone displays Added to IM contacts: and the

contact name.

Scroll to a contact, and press Chat to start a session or press Options and select

•

Contact info to view the details of the selected contact. If you want to edit the

details, see Editing or deleting details in the Contacts menu (menu 3) on page

88.

•

Edit name to edit the contact’s name.

Block contact (or Unblock contact) to block (or unblock) the messages from the

selected contact.

•

Add contact to add a new contact from the phone’s contact memory.

Remove contact to remove a contact from the contact list.

•

Copy to server to copy a name to a server-based contacts list.

Availability alerts to mark those contacts from whom you wish to receive

availability alerts.

Blocking and unblocking messages

Connect to the service and select Conversations or IM contacts. Highlight the

contact in the contacts list from whom you want to block incoming messages.

Press Options, select Block contact and press OK.

To unblock the messages, connect to the service and select Blocked list. Scroll to

the contact from whom you want to unblock the messages and press Unblock.

You can also unblock the messages from the contact list, see Contacts for instant

messaging on page 67.

Groups

You can create your own private groups for a session, or use the public groups

provided by the service provider. The private groups exist only during an active

session. You can add to a private group only the contacts that are in your contact

list and thus in the phone’s contacts memory, see Saving names and phone

numbers (Add contact) on page 84. If the server you are logged onto does not

support group services all groups related menus are dimmed.

Public groups

You can bookmark public groups that your service provider may maintain.

Connect to the service, select Groups and Public groups. Scroll to a group that you

want to chat with and press Join. If you are not in the group, key in your screen

name as your nickname for the group. If you press Options, you can select Delete

group to delete a group from your group list.

Creating a private group

Connect to the service, select Groups and Create group. Key in the name for the

group and the screen name that you want to use for the group. You can use

another screen name in another group. Mark your private group members from

the contacts list and key in an invitation to newly added members.

Instant messaging settings

You may receive the settings as a configuration message from the network

operator or service provider. To receive the settings as a configuration message,

see Configuration settings service on page 17. To key in the settings manually, see

Configuration settings on page 113. For the instant messaging and presence

settings, contact your network operator or service provider.

To enter the Instant messages menu while still offline, press Menu, and select

Messages and Instant messages. Activate a service and select Connect. settings.

Select

•

Configuration and scroll to the set you would like to activate and press Select.

Account to see the accounts provided by the service provider. If more than one

account is displayed choose the one you want to use.

•

User ID to view or to edit the user ID.

Password to enter the password.

E-mail application

The e-mail application allows you to access the compatible e-mail account that

you use in the office or at home, via the phone (network service). You can write,

send, and read e-mails with your phone. Your phone supports POP3 and IMAP4 e-

mail servers.

The e-mail application uses shared memory, see Shared memory on page 14.

Before you can send and retrieve any e-mails, you may need to do the following:

• Obtain a new e-mail account or use the current one. To check the availability

of your e-mail account contact your e-mail service provider.

• To check the settings required for the e-mail application, contact your network

operator or e-mail service provider. To receive the e-mail settings as a

configuration message, see Configuration settings service on page 17.

• To set the e-mail settings on your phone, press Menu and select Messages,

Message settings and E-mail messages. See Settings for e-mail application on

page 78.

Writing and sending an e-mail

You can write your e-mail before connecting to the e-mail service, or connect to

the service first, and then write and send your e-mail.

1. Press Menu and select Messages, E-mail, and Create e-mail. The waiting note

is displayed.

2. Key in the recipient’s e-mail address and press OK or press Edit and key in the

e-mail address, and press OK.

To search for the e-mail address in Contacts, press Options, and select Search.

3. You can key in a subject for the e-mail if you want, and press OK.

If you press Options, you can select one of the following: the message editor,

add a new recipient, add a copy recipient or add a hidden copy recipient.

4. Key in the e-mail message, see Writing text on page 38. The number of

characters that you can key in is shown on the top right of the display.

5. To send the e-mail, press Send. Select

•

Send now to initiate the sending instantly. If you have not already

connected to the e-mail account, your phone establishes the connection

first and then sends the e-mail.

•

Send later to send your e-mail later. The e-mail is saved in the Outbox

folder. If you want to edit or continue writing your e-mail later, you can

save it in Drafts by selecting Save draft msg..

Sending the e-mail later: Press Menu and select Messages and E-mail,

press Options and select Send now or Retrieve and send.

After sending the e-mail, the phone asks if you want to disconnect from the e-

mail service. Press Yes to disconnect or No to leave the connection open.

Note: When sending e-mails, your phone may display the words Message sent.

This is an indication that the e-mail has been sent by your phone to the e-mail

server. This is not an indication that the e-mail has been received at the intended

destination. For more details about e-mail services, check with your service

provider.

Downloading e-mails from your e-mail account

1. Press Menu and select Messages, E-mail and Retrieve to download e-mails

that have been sent to your e-mail account. Or:

Press Menu and select Messages and E-mail, press Options and select Retrieve

and send to download new e-mails and to send e-mails that have been saved

in the Outbox folder.

If the message memory is full, delete some of your older messages before you

start to download new messages.

2. Your phone makes a connection to the e-mail service. A status bar is shown

while your phone is downloading e-mails to your phone.

After the download, the phone asks if you want to disconnect from the e-mail

service. Press Yes to disconnect or No to leave the connection open.

3. Press Select to view the new message in the Inbox, or press Back to view it

later.

If more than one message is received, select the message that you want to

read. An unread text message is indicated by

Reading and replying to an e-mail

Important: E-mails may contain viruses or otherwise be harmful to your device or

PC. Do not open any attachment if you are not sure of the trustworthiness of the

sender.

1. Press Menu, select Messages, E-mail and Inbox.

2. While reading the message, press Options.

You can, for example, view the details of the selected message, mark the

message as unread, delete it, reply to it, reply to all, forward it or move the

message to another folder.

If the message does not fit in the first page, press Next pg. to view the next

page of the message.

3. To reply to an e-mail, press Reply. Select Original text to include the original

message in the reply or select Empty screen.

When replying to an e-mail, first confirm or edit the e-mail address and

subject, then write your reply.

4. To send the message, press Send and select Send now.

To send the message later, press Send later. The message is moved to the

Outbox folder.

After sending the message, the phone asks if you want to disconnect from the

e-mail service. Press Yes to disconnect or No to leave the connection open.

Inbox and Other folders (Drafts, Archive, Outbox and Sent items)

Your phone has the following folders in the E-mail menu:

•

Inbox for saving e-mails that you have downloaded from your e-mail account.

Other folders contains the folders: Drafts for saving unfinished e-mails,

Archive for organising and saving your e-mails, Outbox for saving e-mails that

have not been sent, if you have selected Send later, see Writing and sending an

e-mail on page 70, and Sent items for saving e-mails that have been sent.

Deleting e-mails

To delete e-mails, press Menu and select Messages and E-mail, press Options and

select Delete messages.

To delete all messages from a folder, select the folder from which you want to

delete the messages and press Yes. To delete all messages from all folders, select

All messages and press Yes.

Note that deleting an e-mail from your phone does not delete it from the e-mail

server.

Voice messages

The voice mailbox is a network service and you may need to subscribe to it. For

more information and for the voice mailbox number, contact your service

provider.

Press Menu, and select Messages and Voice messages. Select

•

Listen to voice messages to call your voice mailbox at the phone number that

you have saved in the Voice mailbox number menu.

If you have two phone lines available (network service), each phone line may

have its own voice mailbox number. Refer to Call settings on page 105.

•

Voice mailbox number to key in, search for or edit your voice mailbox number

and press OK to save it.

If supported by the network, the indicator

will show new voice messages.

Press Listen to call your voice mailbox number.

Tip: Pressing and holding

calls your voice mailbox if you have the

number set.

Info messages

With the info message network service you may be able to receive messages on

various topics from your service provider. These messages may include, for

example, weather or traffic conditions. For availability, topics and the relevant

topic numbers, contact your service provider.

Service commands

Press Menu, and select Messages and Service commands. Key in and send service

requests (also known as USSD commands), such as activation commands for

network services, to your service provider.

Deleting all messages from a folder

To delete all messages from a folder, press Menu, and select Messages and Delete

messages.

To delete all messages from a folder, select the folder from which you want to

delete the messages and press OK to confirm the query.

If the folder contains unread messages, the phone will ask whether you want to

delete them also.

Message settings

The message settings affect the sending, receiving and viewing of messages.

Settings for text and SMS e-mail messages

Press Menu, and select Messages, Message settings and Text messages.

Sending profile

Select Sending profile. If more than one message profile set is supported by your

SIM card, select the set that you want to change.

• Select Message centre number to save the phone number of the message

centre that is required for sending text messages. You will receive this number

from your service provider.

• Select Messages sent via to select the message type Text, E-mail, Paging or Fax.

• Select Message validity to select the length of time for which the network

should attempt to deliver your message.

• For the message type Text, select Default recipient number to save a default

number for sending messages for this profile.

For the message type E-mail, select E-mail server to save the e-mail server

number.

• Select Delivery reports to ask the network to send delivery reports about your

messages (network service).

• Select Use GPRS and select Yes to set GPRS as the preferred SMS bearer. Also,

set GPRS connection to Always online, see (E)GPRS connection on page 111.

• Select Reply via same centre to allow the recipient of your message to send you

a reply via your message centre (network service).

• Select Rename sending profile to change the name of the selected message

profile. The default profile cannot be renamed. The message profile sets are

only displayed if your SIM card supports more than one set.

Save message setting

Press Menu, and select Messages, Message settings, Text messages and Save sent

messages. Select Yes to set the phone to save sent multimedia messages in the

Sent items folder. If you select No, the sent messages are not saved.

Settings for multimedia messages

If Allow multimedia reception is set to Yes or In home network, your operator or

service provider may charge you for every message you receive. The default setting

to receive multimedia messages is generally on.

Press Menu, and select Messages, Message settings and Multimedia msgs.. Select

•

Save sent messages. Select Yes to set the phone to save sent multimedia

messages in the Sent items folder. If you select No, the sent messages are not

saved.

•

Delivery reports to ask the network to send delivery reports about your

messages (network service).

Scale image down to define the image size when you insert the image into the

multimedia message.

Default slide timing to define the default time for slides in multimedia

messages.

•

Allow multimedia reception. Choose No, Yes or In home network to use the

multimedia service. If you choose In home network, you cannot receive

multimedia messages when outside your home network.

If Allow multimedia reception is set to Yes or In home network, your operator or

service provider may charge you for every message you receive. The default

setting to receive multimedia messages is generally on.

•

Incoming multimedia messages. Select Retrieve to set the phone to

automatically fetch newly received multimedia messages, or select Reject if

you do not wish to receive multimedia messages. This setting is not shown if

Allow multimedia reception is set to No.

Configuration settings. Select Configuration and select the default service

provider for retrieving multimedia messages. Select Account to see the

accounts provided by the service provider. If more than one account is

displayed choose the one that you want to use. You may receive the settings as

a configuration message from the network operator or service provider. To

receive the settings as configuration message, see Configuration settings

service on page 17. To key in the settings manually see Configuration settings

on page 113.

•

Allow adverts to choose if you allow the reception of messages defined as

advertisements. This setting is not shown if Allow multimedia reception is set

to No.

Settings for e-mail application

You may receive the e-mail settings as a configuration message from the network

operator or service provider. For receiving the settings as a configuration message,

see Configuration settings service on page 17. To key in the settings manually see

Configuration settings on page 113.

Select each of the settings individually and key in all the required settings.

Contact your network operator or e-mail service provider for the settings.

Press Menu and select Messages, Message settings, and E-mail messages. Select

•

Configuration and scroll to the set that you would like to activate and press

Select.

•

Account to see the accounts provided by the service provider. If more than one

account is displayed choose the one that you want to use.

•

My name. Key in your name or nickname.

E-mail address. Key in e-mail address.

Include signature. You can define a signature that is automatically added to

the end of your e-mail, when you write your message.

•

Reply-to address. Key in the e-mail address to which you want the replies to be

sent.

•

SMTP user name. Key in the name that you want to use for outgoing mails.

SMTP password. Key in the password that you want to use for outgoing mails.

Display terminal window. Select Yes to perform manual user authentication for

intranet connections.

•

Incoming server type. Select either POP3 or IMAP4 depending on the type of e-

mail system that you are using. If both types are supported, select IMAP4.

Incoming mail settings

If you have selected POP3 as the incoming server type, the following options

are shown:

•

Retrieve e-mails. Key in the maximum number of e-mails that you want to

retrieve at a time.

•

POP3 user name. Key in the user name.

POP3 password. Key in the password.

Display terminal window. Select Yes to perform manual user authentication

for intranet connections.

If you have selected IMAP4 as the incoming server type, the following options

are shown:

•

Retrieve e-mails. Key in the maximum number of e-mails that you want to

retrieve at a time.

Retrieval method. Select Latest if you want to retrieve all newly received e-

mails or select Latest unread if you want to retrieve only e-mails that you

have not read.

•

IMAP4 user name. Key in the user name.

IMAP4 password. Key in the password.

Display terminal window. Select Yes to perform manual user authentication

for intranet connections.

Common settings

Press Menu and select Messages, Message settings, Other settings and Font size

to select the font size for reading and writing messages.

Message counter

To view how many messages you have sent and received, press Menu and select

Messages and Message counter. Select Sent messages or Received messages or

select Clear counters to clear the counters.

■ Call register

The phone registers the phone numbers of missed, received and

dialled calls, and the approximate length of your calls.

The phone registers missed and received calls only if the

network supports these functions, and the phone is switched on and within the

network’s service area.

When you press Options in the Missed calls, Received calls and Dialled numbers

menus, you can, for example, view the date and the time of the call, edit or delete

the phone number from the list, save the number in Contacts, or send a message

to the number.

Recent calls lists

Press Menu, and select Call register and then select

•

Missed calls to view the list of up to 20 phone numbers from which somebody

has tried to call you (network service). The number in front of the (name or)

phone number indicates the amount of call attempts from that caller.

Tip: When a note about missed calls is displayed, press List to access

the list of phone numbers. Scroll to the number that you would like to

call back and press

•

Received calls to view the list of up to 20 phone numbers from which you have

most recently accepted or rejected calls (network service).

Dialled numbers to view the list of up to 20 phone numbers that you have most

recently called or attempted to call.

Tip: In standby mode, press once to access the list of dialled

numbers. Scroll to the number or name that you want, and press to

call the number.

•

Delete recent call lists to delete the recent calls lists. Select whether you want

to delete all the phone numbers in the recent calls lists, or only those numbers

in the missed calls, received calls or dialled numbers lists. You cannot undo this

operation.

Counters and timers for calls, data and messages

Note: The actual invoice for calls and services from your service provider may vary,

depending upon network features, rounding off for billing, taxes and so forth.

Press Menu, and select Call register and then select

•

Call duration. Scroll to view the approximate duration of your incoming and

outgoing calls in hours, minutes and seconds. The security code is required to

clear the timers.

If you have two phone lines available (network service), each phone line has its

own call duration timers. The timers of the currently selected line are

displayed. Refer to Call settings on page 105.

•

GPRS data counter. Scroll to check the amounts of data that were sent or

received in the last session, data sent and received in total, and to clear the

counters. The counter unit is a byte. The security code is required to clear the

counters.

GPRS connection timer. Scroll to check the approximate duration of the last

GPRS connection or the total GPRS connection time. You can also clear the

timers. The security code is required to clear the timers.

■ Contacts

You can save names and phone numbers (Contacts) in the

phone’s memory and in the SIM card’s memory.

• The phone’s memory may save up to 1000 names with

numbers and text notes about each name. You can also save an image for a

certain number of names. The number of names that can be saved depends on

the length of the names, and the number and length of the phone numbers and

text items.

Contacts use shared memory, see Shared memory on page 14.

• The phone supports SIM cards that can save up to 254 names and phone

numbers. Names and numbers saved in the SIM card’s memory, are indicated

In dynamic contacts you can publish your current availability status to

communicate to anyone who has access to this service and who is requesting this

information. You can view the availability status of any of the contacts that you

have subscribed to in the Subscribed names menu and in the detailed view of a

name in Contacts. See My presence on page 89.

Selecting settings for contacts

Press Menu and select Contacts and Settings. Select

•

Memory in use to select the memory, either SIM card or phone, that you want

to use for your contacts. To recall names and numbers from both memories for

contacts, select Phone and SIM. In that case, the names and numbers will be

saved in the phone’s memory.

•

Contacts view to select how the names, numbers and images in contacts are

displayed.

Memory status to view how much memory is available in the selected memory

for contacts.

Saving names and phone numbers (Add contact)

Names and numbers will be saved in the used memory, see Selecting settings for

contacts above.

1. Press Menu and select Contacts and Add new contact.

2. Key in the name and press OK. See Using traditional text input on page 39.

3. Key in the phone number, and press OK. To key in the numbers, see Making a

call on page 34.

4. When the name and number are saved, press Done.

Tip: Quick save In standby mode, key in the phone number and press Save.

Key in the name, press OK and Done.

Saving multiple numbers or text items per name

You can save different types of phone numbers and short text items per name in

the phone’s internal memory for contacts.

The first number saved is automatically set as the default number and it is

indicated with a frame around the number type indicator, for example

. When

you select a name from contacts, for example to make a call, the default number is

used unless you select another number.

1. Make sure that the memory in use is either Phone or Phone and SIM. See

Selecting settings for contacts on page 84.

2. To access the list of names and phone numbers, move the joystick down in

standby mode.

3. Scroll to the name saved in the phone’s internal memory for the contact to

which you want to add a new number or text item, and press Details.

4. Press Options and select Add number or Add detail.

5. To add a number or detail, select one of the number types or text types,

respectively.

• If you select the text type User ID:

Select Search to search for an ID by a mobile phone number or an e-mail

address in the server of the operator or service provider if you have

connected to the presence service. See My presence on page 89. If only one

ID is found, it is automatically saved. Otherwise, to save the ID, press

Options, and select Save.

To key in the ID, select Enter ID manually. Key in the ID and press OK to save

it.

To change the number or text type, select Change type in the options list. Note

that you cannot change the type of an ID when it is on the IM contacts or in

the Subscribed names list.

To set the selected number as the default number, select Set as default.

6. Key in the number or text item and press OK to save it.

7. Press Back and then Exit to return to standby mode.

Adding an image to a name or number in contacts

You can add an image in supported format to a name or number saved in the

phone’s internal memory.

Move the joystick down in standby mode, scroll to the contact that you want to

add an image to and press Details. Press Options and select Add image. The phone

opens the list of folders in the Gallery. Scroll to the desired image, press Options

and select Save to contacts. A copy of the image is added to the contact.

Searching for a contact

1. Press Menu and select Contacts and Search, or to quickly find a contact name,

move the joystick down in standby mode.

2. You can key in the first characters of the name you are searching for in the

pop-up window.

Move the joystick up and down to scroll through the names in the list, and

move the joystick left and right to move the cursor in the pop-up window.

3. Scroll to the contact name that you want, and press Details. Press View to see

the whole information.

Depending on the Contacts view selection in Selecting settings for contacts on

page 84, the subscribed names are shown differently. Only the availability

indicator or the availability indicator, the personal logo and the status

message are shown. Press Details and all of the dynamic information is shown.

Tip: Viewing a contact. To quickly view a specific name with the default

phone number, press and hold

at the name while scrolling through

the contact names.

To view the status message in full, press Details and press and hold

at the

dynamic contact while scrolling through the contact names.

Deleting contacts

Press Menu and select Contacts and Delete to delete contacts and all the details

attached to them.

• To delete contacts individually, select One by one and scroll to the name that

you want to delete. Press Delete and press Yes to confirm.

If the contact has an ID in IM contacts or in the Subscribed names list, the note

Presence information will be deleted is shown before the contact is deleted.

• To delete contacts all at once, select Delete all and then scroll to either of the

Phone or SIM card memories and press Delete. Press Yes and confirm with the

security code.

Editing or deleting details

Search for the contact that you want to edit or delete and press Details. Scroll to

the name, number, text item or image that you want to edit or delete and press

Options.

• To edit a name, number or text item or to change image, select Edit name, Edit

number, Edit detail or Change image, respectively.

Note that you cannot edit or delete an ID when it is in IM contacts or in the

Subscribed names list.

• To delete a number or text item, select Delete number or Delete detail,

respectively.

• To delete an image attached to the contact, select Delete image. Deleting an

image from contacts does not delete it from Gallery.

My presence

With the presence service (network service) you can share your presence status

with other users, for example your family, friends and colleagues with compatible

devices and access to the service. Presence status includes your availability, status

message and personal logo. Other users who have access to the service and who

are requesting your information are able to see your status. The requested

information is shown in Subscribed names in the viewers Contacts menu. You can

personalise the information that you want to share with others and control who

can see your status.

Before you can use presence, you need to subscribe to the service. To check the

availability, for charging details and to subscribe to the service, contact your

network operator or service provider, from whom you also receive your unique ID

and password and the settings for the service. To set the required settings for the

presence service, see Instant messaging settings on page 69. While you have

connected to the presence service, you can use the other functions of the phone,

and the presence service is active in the background.

Press Menu and select Contacts and My presence. Select

•

Connect to 'My presence' service (or Disconnect) to connect to (or to

disconnect from) the service.

•

My current presence to change your presence status. Select

•

View current presence and select Private pres. or Public pres. to view your

current private or public status.

•

My availability to set your availability status to Available indicated by

or to Busy indicated by , or to Not available indicated by

My presence message and key in the text to be shown to other persons or

press Options and select Previous msgs. and select an old message as the

status message.

•

My presence logo to select your personal logo from the Graphics folder in

the gallery. If you select the Default, the logo is not published.

Show to to select the groups to whom you want to show your presence

status or if not to show it at all.

Select Private and public and contacts in your private list are able to see all

your presence information: availability, status message and logo. Other

contacts can see only your availability.

Select Private viewers and the contacts in your private list can see all your

presence information (availability, status message and logo). Other users

will not see any information.

If you select No one, no one can see your presence information.

•

Viewers and select

•

Current viewers to view all the persons who have subscribed to your

presence information.

•

Private list is a list of the persons who are allowed to view all your presence

information, including availability, status message and logo. You can

manage your own private list. Other persons who are not in the private list,

can see only your availability.

•

Blocked list to view all the persons you have blocked from viewing your

presence information.

•

Settings and select

•

Show current presence in idle to show the current status indicator in

standby mode.

•

Synchronise with profiles to select whether you want to update your My

presence message and My availability manually or automatically by linking

them to the currently active profile. Refer also to Profiles on page 99. Note

that you cannot link a personalised status logo to a Profile.

•

Connection type to select if the phone connects automatically to the

service when the phone is switched on.

IM and my presence settings, see Instant messaging settings on page 69.

Subscribed names

You can create a list of contacts whose presence status information you want to

be aware of. You can view the information if the contacts allow you to view it and

if it is not prevented by the contact or network. You can view these subscribed

names either by scrolling through the contacts or via the Subscribed names menu.

Ensure that the memory in use is either Phone or Phone and SIM. See Selecting

settings for contacts on page 84.

To connect to the Presence service, press Menu and select Contacts, My presence

and Connect to 'My presence' service. You can view the subscribed names even

when you are not connected to the presence service but you cannot see the

presence status information about the contact.

Adding contacts to the subscribed names

1. Press Menu and select Contacts and Subscribed names. If you have not

connected to the Presence service, the phone asks if you want to connect now.

2. If you have no contacts on your list, press Add. Otherwise, press Options and

select Subscribe new. The list of your contacts is shown.

3. Select a contact from the list and if the contact has a user ID saved, the

contact is added to the subscribed names list. If there is more than one ID,

select one of them. After subscription of the contact, Subscription activated is

shown.

Tip: To subscribe to a contact from Contacts list, move the joystick down in

standby mode and scroll to the contact you want to subscribe to. Press

Details and press Options. To subscribe, select Request presence and select

As subscription.

If you only want to view the presence information but not to subscribe to a

contact, select Request presence and One time only.

Viewing the subscribed names

Refer also to Searching for a contact on page 87 to view the presence information.

1. Press Menu and select Contacts and Subscribed names.

The status information of the first contact on the subscribed names list is

displayed. The information that the person wants to give to others may include

text and some of the following icons:

or indicate that the person is either available, discreet or not

available.

indicates that the person’s presence information is not available.

2. Press Details to view the details of the selected contact, or press Options and

select

•

Subscribe new to add a new contact to the list of subscribed names.

Chat to start a conversation.

Send message to send a text message to the selected contact.

Send SMS e-mail to send an e-mail to the selected contact.

Send bus. card to send a business card to the selected contact.

Unsubscribe to remove the selected contact from the list of subscribed

names.

Unsubscribing a contact

• To unsubscribe a contact from the Contacts list, move the joystick down in

standby mode and scroll to the contact that you want to unsubscribe. Press

Details and Details again, select the ID and press Options. To unsubscribe,

select Unsubscribe and press Yes to confirm.

• To unsubscribe via the Subscribed names menu, see Viewing the subscribed

names on page 92.

Copying contacts

You can copy names and phone numbers from the phone’s memory to your SIM

card’s memory and vice versa. Note that any text items saved in the phone’s

internal memory, such as e-mail addresses, will not be copied to the SIM card.

1. Press Menu and select Contacts and Copy.

2. Select the copying direction, From phone to SIM card or From SIM card to

phone.

3. Select One by one, All or Default numbers.

• If you select One by one, scroll to the name that you want to copy and press

Copy.

Default numbers is shown if you copy from the phone to the SIM card. Only the

default numbers will be copied.

4. To choose whether you want to keep or delete the original names and numbers,

select Keep original or Move original.

• If you select All or Default numbers, press Yes when Copy contacts? or Move

contacts? is displayed.

Sending and receiving a business card

You can send and receive a person’s contact information from a compatible device

as a business card.

When you have received a business card, press Show and Save to save the

business card in the phone’s memory. To discard the business card, press Exit and

then Yes.

To send a business card, search for the name and phone number that you want to

send from Contacts, press Details and Options and select Send bus. card. Select

Via infrared, Via text message (network service) or Via multimedia (network

service) and Default number or All details.

No pictures can be sent if you choose Via text message.

Speed dials

To assign a number to a speed-dialling key, press Menu and select Contacts and

Speed dials and scroll to the speed-dialling key number that you want.

Press Assign, or if a number has already been assigned to the key, press Options

and select Change. Press Search, and select first the name and then the number

that you want to assign. If the Speed dialling function is off, the phone asks

whether you want to activate it. See also Speed dialling in Call settings on page

105.

To make a call using the speed-dialling keys, see Speed dialling a phone number

on page 35.

Voice dialling

You can make a phone call by saying a voice tag that has been added to a phone

number. Any spoken word(s), such as a person’s name(s), can be a voice tag. You

can add up to ten voice tags.

Before using voice tags, note that:

•

Voice tags are not language-dependent. They are dependent on the speaker's voice.

You must say the name exactly as you said it when you recorded it.

Voice tags are sensitive to background noise. Record voice tags and use them in a quiet

environment.

•

Very short names are not accepted. Use long names and avoid similar names for different

numbers.

Note: Using voice tags may be difficult in a noisy environment or during an

emergency, so you should not rely solely upon voice dialling in all circumstances.

Adding and managing voice tags

Save or copy in the phone’s memory the contacts to which you want to add a

voice tag. You can also add voice tags to the names in the SIM card, but if you

replace your SIM card with a new one, you first need to delete the old voice tags

before you can add new ones.

Voice tags use shared memory, see Shared memory on page 14.

1. In standby mode, move the joystick down.

2. Scroll to the contact to which you want to add a voice tag and press Details.

Scroll to the phone number you want and press Options.

3. Select Add voice tag.

4. Press Start, and say clearly the word(s) you want to record as a voice tag. After

recording, the phone plays the recorded tag.

When the voice tag has been successfully saved, Voice tag saved is displayed, a

beep sounds and a symbol

appears after the phone number with a voice

tag.

To check the voice tags, press Menu and select Contacts and Voice tags. Scroll to

the contact with the voice tag that you want, and press Select to see the options

to listen to, delete or change the recorded voice tag.

Making a call by using a voice tag

If the phone is running an application using the GPRS connection sending or

receiving data, first end this application to make a call by using voice dialling.

1. In standby mode, press and hold the right selection key. A short tone is heard

and Speak now is displayed.

2. Say the voice tag clearly. The phone plays the recognised voice tag and then

dials the phone number of the voice tag after 1.5 seconds.

If you are using a compatible headset with the headset key, press and hold the

headset key to start the voice dialling.

Info numbers and service numbers

Your service provider may have included information numbers or service numbers

in your SIM card. These menus are only shown if supported by your SIM card.

Press Menu and select Contacts and Info numbers or Service numbers. Scroll

through a category to an information number, or to a service number, and press

to call the number.

My numbers

The phone numbers assigned to your SIM card are saved in My numbers if this is

allowed by the card. To view the numbers, press Menuand select Contacts and My

numbers. Scroll to the desired name or number, and press View.

Caller groups

You can arrange the names and phone numbers saved in Contacts into caller

groups. For each caller group, you can set the phone to sound a specific ringing

tone and show a selected graphic on the display when the phone recognises a call

from a phone number in the group, see below. To set the phone to ring only upon

calls from phone numbers belonging to a selected caller group, see Alert for in

Tone settings on page 100.

Press Menu and select Contacts and Caller groups and select the desired caller

group. Select

•

Group name, key in a new name for the caller group and press OK.

Group ringing tone and select the ringing tone for the group. Default is the

ringing tone selected for the currently active profile.

•

Group logo and select On to set the phone to display the group logo, Off not to

display it, or View to view the logo.

•

Group members to add a name to the caller group, press Add. Scroll to the

name you want to add to the group and press Add.

To remove a name from a caller group, scroll to the name that you want to

remove, and press Options and select Remove contact.

■ Settings

Profiles

Your phone has various setting groups, profiles, for which you

can customise the phone tones for different events and environments. Initially,

personalise the profiles to your own liking and then you only need to activate a

profile to use it. Available profiles are General, Silent, Meeting, Outdoor, My style

1, and My style 2.

Press Menu, and select Settings and Profiles. Scroll to a profile and press Select.

• To activate the selected profile, select Activate.

• To personalise the profile, select Personalise. Select the setting you want to

change and make the changes.

For the tone settings, see Tone settings on page 100.

To rename a profile, select Profile name. The General profile cannot be

renamed.

To change your presence status information, select My presence. This menu is

available if you have set Synchronise with profiles to On, see My presence on

page 89. Select My availability to change your availability status and My

presence message to edit your status message.

• To set the profile to be active until a certain time up to 24 hours, select Timed

and set the time for the profile setting to end. When the time set for the profile

expires, the previous profile that was not timed, becomes active.

Tip: To change the profile quickly in standby mode, press the power key

, scroll to the profile that you want to activate and press Select.

Themes

A theme is a package that may include a screen saver, a wallpaper image, a ringing

tone and a colour scheme to customise your phone for different events and

environments. Themes are stored in Gallery.

Press Menu, and select Settings and Themes.

• To activate a theme, select Select theme to view the Themes folder in Gallery.

Open the folder and scroll to a theme. Press Options and select Apply theme.

Refer also to Gallery on page 117.

• To download new themes, select Theme downloads. Refer to Downloading on

page 151.

Tone settings

Press Menu, and select Settings and then Tone settings. You can find the same

settings in the Profiles menu, see Profiles on page 99. Note that the settings you

make will change the settings in the active profile.

100

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.

Select Ringing tone for incoming voice calls. To select ringing tones from Gallery,

select Open gallery from the ringing tone list.

Tip: If you receive a ringing tone via infrared connection or by

downloading, you can save the ringing tone in the Gallery.

Select Ringing volume and Vibrating alert for incoming voice calls and messages.

The vibrating alert does not work when the phone is connected to a charger, a

desktop stand, a car kit, or other like enhancement.

Select Message alert tone to set the alert tone for the incoming messages or

Instant message alert tone to set the alert tone for instant messages. Select

Keypad tones, or Warning tones to set the phone to sound tones, for example,

when the battery is running out of power.

Select Alert for to set the phone to ring only upon calls from phone numbers that

belong to a selected caller group. Scroll to the caller group you want to select or

choose All calls and press Mark.

Personal shortcuts

With personal shortcuts you get quick access to frequently used phone functions.

Right selection key

You can allocate one phone function from a predefined list to the right selection

key. Refer also to Standby mode on page 28. This menu is not shown in some

operator variants.

101

Press Menu, and select Settings, Personal shortcuts and Right selection key. Select

a function from the list. The name of the right selection key changes in standby

mode according to the function.

Go to options

You can allocate phone functions from a predefined list to the left selection key.

Press Menu, and select Settings and Personal shortcuts. Select Select 'Go to'

options to choose the functions that you want to appear in the shortcut list.

Select Organise 'Go to' options to rearrange the functions on your personal

shortcut list. Refer also to Standby mode on page 28.

Voice commands

You can have phone functions which can be activated by saying a voice tag. Up to

five functions can be selected for voice tag.

Press Menu, and select Settings, Personal shortcuts and Voice commands. Select

the function folder that you want and scroll to the function to which you want to

add a voice tag and press Add. A voice tag is indicated with . Refer to the

instructions in section Adding and managing voice tags on page 96.

To activate a voice command, refer to the instructions in section Making a call by

using a voice tag on page 97.

During a call or when an application using the (E)GPRS connection is sending or

receiving data, you cannot activate or add a voice command.

Display settings

Press Menu, and select Settings and Display settings.

102

• Select Wallpaper to set your phone to display a background image, known as

wallpaper, when the phone is in standby mode. Some images are presaved in

the Gallery menu. You can also receive images, for example, via multimedia

messages, or transfer them with PC Suite from your PC and then save them in

Gallery. Your phone supports JPEG, GIF, WBMP, BMP and PNG formats but not

necessarily all variations of these file formats.

To select the wallpaper, select Select wallpaper and open an image folder.

Scroll to the image that you want to set as wallpaper, press Options and select

Set as wallpaper.

To activate/deactivate the wallpaper, select On/Off, respectively.

Note that the wallpaper is not displayed when the phone activates the screen

saver.

• Select Screen saver to set your phone to display a screen saver when the phone

is in standby mode and none of the phone’s functions have been used for a

certain time.

Select On to switch the screen saver on or Off to switch it off.

Select in Time-out the time after which the screen saver will be activated. In

Other you can set the length of the timeout from 5 seconds to 10 minutes

(minutes:seconds).

With Select s. saver you can choose an animation or a still image as the screen

saver from Gallery.

Press any key to deactivate the screen saver. The screen saver is also

deactivated when the phone is out of the network coverage area.

103

Independent of the screen saver settings, for power saving purposes, a digital

clock view will be activated when no phone function has been used for a

certain time. See Power saving on page 30.

Note that the screen saver overrides all the graphics and texts on the display in

standby mode.

• Select Colour schemes to change the colour in some display components, for

example indicators and signal and battery bars, and the background image

that appears when using a menu function.

• Select Menu view to set the way the phone displays the main menu. Select List

for the menu list view and Grid for the menu grid view.

• Select Operator logo to set your phone to display or hide the operator logo. If

you have not saved the operator logo, the Operator logo menu is dimmed. The

operator logo is not displayed when the phone activates the screen saver.

For more information on the availability of an operator logo, contact your

network operator or service provider. See also PC Suite on page 158.

Time and date settings

Press Menu, and select Settings and Time and date settings.

• Select Clock and Show clock (or Hide clock) to show (or hide) the time on the

top right of the display in standby mode. Select Set the time to adjust the clock

to the correct time, Time zone to set the time zone, and Time format to select

the 12-hour or 24-hour time format.

104

The clock serves the functions Messages, Call register, Alarm clock, timed

Profiles, Calendar, Notes and Screen saver, for example.

If the battery is removed from the phone or if the battery is empty, you may

need to set the time again.

• Select Date and Show date (or Hide date) and the date is shown (or hidden) on

the display when the phone is in standby mode. Select Set the date to adjust

the date. You can also select the date format and date separator.

• Select Auto-update of date & time (network service) and On to set the phone to

automatically update the time and date according to the current time zone. To

set the phone to request for a confirmation before the update, select Confirm

first.

The automatic update of the date and time does not change the time that you

have set for the alarm clock, calendar or the alarm notes. They are in local time.

Updating may cause some alarms that you have set to expire.

For information on availability, contact your network operator or service

provider.

Call settings

Press Menu, and select Settings and Call settings. Select

•

Automatic volume control and the phone will automatically adjust the speaker

volume according to the background noise.

Call divert (network service). With call divert, you can direct your incoming

calls to another number, for example, to your voice mailbox number. For

105

details, contact your service provider. Divert options not supported by your SIM

card or your network operator may not be shown.

Select the divert option you want, for example, select Divert if busy to divert

voice calls when your number is busy or when you reject an incoming call.

To set the divert setting to on, select Activate and then select the timeout after

which the call is diverted, if this is available for the divert option. To set the

divert setting to off, select Cancel, or select Check status, if this is available for

the divert option, to check whether call divert is activated or not. Several divert

options may be active at the same time.

To see the divert indicators in standby mode, see Standby mode on page 28.

Call barring and call diverting cannot be active at the same time.

•

Anykey answer and On and you can answer an incoming call by briefly pressing

any key, except

, selection keys

and

, and

Automatic redial and On and your phone will make a maximum of ten attempts

to connect the call after an unsuccessful call attempt.

Speed dialling and On and the names and phone numbers assigned to the

speed-dialling keys, from

, can be dialled by pressing and holding

the corresponding number key.

•

Call waiting and Activate and the network will notify you of an incoming call

while you have a call in progress (network service). See Call waiting on page

36.

Summary after call and On and the phone will briefly display the approximate

duration and cost (network service) of the call after each call.

106

•

Send my caller ID and Yes and your phone number will be displayed to the

person you are calling (network service). Select Set by network and the setting

agreed upon with your service provider is used.

Line for outgoing calls which is a network service, to select phone line 1 or 2,

that is, the subscriber number, for making calls. For example, you can have a

private and a business line. For more information on availability, contact your

network operator or service provider.

If you select Line 2 and have not subscribed to this network service, you will

not be able to make calls. However, calls on both lines can be answered

regardless of the selected line.

If supported by your SIM card, you can prevent the line selection by selecting

the option Lock.

Tip: In standby mode and if you have two lines available, you can

switch from one line to the other by pressing and holding

Phone settings

Press Menu, and select Settings, Phone settings. Select

•

Phone language to set the display language of your phone. If you select

Automatic the phone selects the language according to the information on the

SIM card.

•

Automatic keyguard to set the keypad of your phone to lock automatically

after a pre-set time delay when the phone is in standby mode and no phone

107

function has been used. Select On and you can set the time from 5 seconds to

60 minutes.

Refer also to Keypad lock (Keyguard) on page 32.

When the keyguard is on, calls still may be possible to the official emergency

number. Key in the emergency number and press

•

Cell info display and On to receive information from the network depending on

the network cell used (network service).

Welcome note and key in the note you would like to be shown briefly when the

phone is switched on. To save the note, press Save.

Operator selection and Automatic and the phone automatically selects one of

the cellular networks available in your area.

If you select Manual, you can select a network that has a roaming agreement

with your home network operator. If No network access is displayed, you must

select another network. The phone stays in manual mode until the automatic

mode is selected or another SIM card is inserted into the phone.

•

Confirm SIM service actions. See SIM services on page 156.

Help text activation to set the phone to show or not to show the help texts. See

also Using the menu on page 42.

•

Start-up tone to set the phone to play or not to play a start-up tone when the

phone is switched on.

108

Connectivity

You can connect the phone to a compatible device via an infrared connection or

you can also define the settings for (E)GPRS dial-up connections.

Infrared

You can set up the phone to receive data through its infrared (IR) port. To use an IR

connection, the device with which you want to establish a connection must be

IrDA compliant. You can send or receive data such as business cards, graphics,

images, sound clips, videos and calendar notes to or from a compatible phone or

data device (for example, a computer) via the IR port of your phone.

Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR

devices. This device is a Class 1 Laser product.

Sending and receiving data via IR

• Ensure that the IR ports of the sending and receiving devices are pointing at

each other and that there are no obstructions between the devices. The

preferable distance between the two devices in an infrared connection is one

meter at most.

• To activate the IR port of your phone to receive data via IR, press Menu, and

select Settings, Connectivity and Infrared.

• The user of the transmitting phone selects the desired IR function to start the

data transfer.

If data transfer is not started within 2minutes after the activation of the IR port,

the connection is cancelled and has to be started again.

109

IR connection indicator

• When is shown continuously, the IR connection is activated and your

phone is ready to send or receive data via its IR port.

• When blinks, your phone is trying to connect to the other device or a

connection has been lost.

(E)GPRS

GPRS (General Packet Radio Service) is a network service that allows mobile

phones to be used for sending and receiving data over an Internet Protocol (IP)-

based network. GPRS is a data bearer that enables wireless access to data

networks such as the Internet.

EGPRS (Enhanced GPRS), also known as EDGE (Enhanced Data Rates for Global

Evolution), is similar to GPRS. EDGE is a radio interface modulation technique

which increases GRPS data rates. For more information on the availability of

EGPRS and data transfer speed, contact your network operator or service provider.

The applications that may use (E)GPRS are MMS, Instant messaging, browsing

sessions, e-mail, remote SyncML, Java application downloading and the PC dial-

up (for example, Internet and e-mail).

Before you can use (E)GPRS technology:

• Contact your network operator or service provider for availability of and

subscription to the (E)GPRS service.

• Save the (E)GPRS settings for each of the applications used over (E)GPRS.

For information on pricing, contact your network operator or service provider.

110

Note that when you have selected GPRS as a data bearer, the phone uses EGPRS

instead of GPRS if this is available in the network. You cannot select between

EGPRS and GPRS but for some applications you may be able to select either GPRS

or GSM data (CSD, Circuit Switched Data).

(E)GPRS connection

Press Menu, and select Settings, Connectivity, GPRS and GPRS connection.

• Select Always online to set the phone to automatically register to a (E)GPRS

network when you switch the phone on. When the (E)GPRS service is available,

the indicator

When you start an application using (E)GPRS, the connection between phone

and network is established, the indicator is shown and data transfer is

is shown on the top left of the display.

possible. When you end the application, the (E)GPRS connection is ended but

the registration to the (E)GPRS network remains.

If you receive a call or a text message, or make a call during a (E)GPRS

connection, the indicator

will be shown on the top right of the display to

indicate that the (E)GPRS connection is suspended (on hold).

Note that GPRS and EGPRS are not indicated separately, the indicators for

GPRS and EGPRS are the same.

• Select When needed and the (E)GPRS registration and connection are

established when an application using (E)GPRS needs it and closed when you

end the application.

111

(E)GPRS modem settings

You can connect the phone via infrared or a data cable connection to a

compatible PC and use the phone as a modem to enable (E)GPRS connectivity

from the PC.

To define the settings for (E)GPRS connections from your PC, press Menu, and

select Settings, Connectivity, GPRS and GPRS modem settings.

• Select Active access point and activate the access point that you want to use.

• Select Edit active access point to change the access point settings.

• Select Alias for access point. Key in the name that you would like for the

activated access point and press OK.

• Select GPRS access point. Key in the Access Point Name (APN) to establish a

connection to an (E)GPRS network and press OK. Contact your network

operator or service provider for the APN.

You can also set the (E)GPRS dial-up service settings (Access Point Name) on your

PC using the Nokia Modem Options software, see PC Suite on page 158. If you

have set the settings both on your PC and on your phone, note that the PC’s

settings will be used.

Enhancement settings

The enhancement settings menu is shown only if the phone is or has been

connected to a compatible mobile enhancement, chargers and handsfree units,

for example.

112

Press Menu, and select Settings and Enhancement settings. You can select an

enhancement menu if the corresponding enhancement is or has been connected

to the phone. Depending on the enhancement, you can select some of the

following options:

•

Default profile to select the profile that you want to be automatically

activated when you connect to the selected enhancement. You can select

another profile while the enhancement is connected.

Automatic answer to set the phone to answer an incoming call automatically

after 5 seconds. If the Incoming call alert is set to Beep once or Off, automatic

answer will not be in use.

Lights to set the lights permanently On. Select Automatic to set the lights on

for 15 seconds after a keypress.

• When the phone is connected to the full car kit, select Ignition detector and On

to automatically switch off the phone approximately 20 seconds after you

have switched off the car’s ignition.

Configuration settings

Some of the network services, such as mobile Internet services, MMS, Instant

messages, E-Mail messages, or Synchronisation need to have the correct

configuration settings on your phone. Get the settings from a service provider as a

configuration message or key in your personal settings manually. Configuration

settings from up to ten different service providers can be stored in the phone and

can be managed within this menu.

113

To save the configuration settings received by a configuration message sent by a

service provider, see Configuration settings service on page 17.

The settings can be viewed and partly edited also in the different applications.

Press Menu, and select Settings, Configuration settings. Select

•

Default configuration settings. to view the list of service providers stored on

the phone (the default service provider is highlighted) and to select another

service provider as default. Scroll to a provider and press Details to view the list

with supported applications. To delete a service provider from the list, press

Options and select Delete.

•

Activate default in all applications to set the applications to use the settings

from the default service provider.

Preferred access point to select another access point. Normally the access

point from your preferred network operator is to be used.

Keying in the settings manually

To enter, view and edit the settings manually, press Menu, and select Settings,

Configuration settings and Personal configuration settings.

To add a new configuration, press Add new or press Options and select Add new.

Choose one of the application types from the list and key in all the necessary

settings. To activate the settings, press Back and Options and select Activate.

To view or to edit the user-defined settings select the application that you want to

view and select the setting to edit.

114

Security settings

When security features that restrict calls are in use (such as call barring, closed user group

and fixed dialling) calls still may be possible to the official emergency number programmed

into your device.

Press Menu, and select Settings and Security settings. Select

•

PIN code request to set the phone to request your PIN code every time the

phone is switched on. Some SIM cards do not allow the PIN code request to be

turned off.

•

Call barring service (network service) to restrict incoming calls to and outgoing

calls from your phone. A barring password is required.

Call barring and call diverting cannot be active at the same time.

•

Fixed dialling to restrict your outgoing calls and text messages to selected

phone numbers if this function is supported by your SIM card. The PIN2 code is

required.

When the fixed dialling is on, (E)GPRS connections are not possible except

while sending text messages over an (E)GPRS connection. In this case, the

recipient’s phone number and the message centre number have to be included

on the fixed dialling list.

•

Closed user group. Closed user group is a network service that specifies the

group of people whom you can call and who can call you. For more information

contact your network operator or service provider.

Security level. Select Phone and the phone will request the security code

whenever a new SIM card is inserted into the phone.

115

Select Memory and the phone will request the security code when the SIM

card’s memory is selected and you want to change the memory in use (see

Selecting settings for contacts on page 84) or copy from one memory to

another (Copying contacts on page 94).

•

Access codes to change the security code, PIN code, PIN2 code or barring

password. Codes can only include numbers from 0 to 9.

Restore factory settings

To reset some of the menu settings to their original values, press Menu, and select

Settings and Restore factory settings. Key in the security code and press OK. Note

that the data that you have keyed in or downloaded, for example, the names and

phone numbers saved in contacts are not deleted.

■ Operator menu

This menu lets you access a portal to services provided by your network operator.

This menu is operator specific. The name and the icon depend on the operator. For

more information, contact your network operator.

The operator can update this menu with a service message. For more information,

refer to Service inbox on page 151.

116

■ Gallery

In this menu, you can manage graphics, images, video clips,

recordings and tones that you have saved, for example, from

multimedia messages. These files are arranged in folders.

Your phone supports a Digital Rights Management (DRM) system to protect

acquired content. A piece of content, for example a ringing tone, can be protected

and associated with certain usage rules, for example number of usage times and a

certain usage period. The rules are defined in the content’s activation key which

can be delivered either together with the content or independently depending on

the service provider. You may be able to update these activation keys. Always

check the delivery terms of any content and activation key before acquiring them,

as they may be subject to a fee.

being copied, modified, transferred or forwarded.

If your phone displays a message that the memory is full, delete some of the files

in Gallery before continuing.

1. Press Menu and select Gallery. A list of folders is shown. Images, Video clips,

Themes, Graphics, Tones and Recordings are the original folders on the phone.

2. Scroll to the desired folder and press Open to view a list of files in the folder or

press Options and one of the options may be available:

•

Downloads to download more images, tones and videos. Select Graphic

downloads, Tone downloads, Video downloads or Theme downloads. The list

of available browser bookmarks is shown. Select More bookmarks to access

the list of bookmarks in the Services menu, see Bookmarks on page 150.

117

Select the appropriate bookmark to connect to the desired site. If the

connection fails, you may not be able to access the page from the service

whose connection settings are currently active. In this case, enter the

Services menu and activate another set of service settings, see Making a

connection to a service on page 146. Try reconnecting to the site.

For availability of different services, pricing and tariffs, contact your

network operator and/or the service provider. Download content only from

the sources you trust.

•

Delete folder, Move, Rename folder, Details, Type of view, Sort, Add folder

and Activation key list. You cannot delete, rename or move the original

folders on the phone.

Memory status to view the status of the second shared memory of the

phone. See Shared memory, 14.

3. If you have opened a folder, select the file that you want to view and press

Open. If Themes was selected before, scroll to a theme and press View to open

the theme package.

Select and open a file, or press Options and use one of the following functions

that may be available for the selected file:

•

Delete, Send, Edit image, Move, Rename, Set as wallpaper, Set as ring tone,

Apply theme, Details, Type of view, Sort, Delete all, Open in sequence, Mute

audio (Unmute audio), Set contrast, Add folder and Memory status.

•

Send to send the selected file via MMS or IR connection.

Delete all to delete all the files and folders in the selected folder.

118

•

Edit image to insert text, a frame or clip-art into the selected picture or to

crop the image.

•

Open in sequence to view the files in the folder individually.

Mute audio (Unmute audio) to mute (unmute) the sound file.

Set contrast to adjust the contrast level of the image.

Activate content to update the activation key of the selected file. The

option is only shown if the activation key of the file can be updated.

•

Activation key list to view the list of all available activation keys. You can

delete the activation keys, for example delete the expired ones.

■ Media

Camera

You can take photos or record video clips with the phone’s built-in camera. The

camera lens is on the back of the phone, and the display of the phone works as a

viewfinder. The camera produces pictures in JPEG format and the video clips in

3GP format.

If there is not enough memory to take a new photo, you need to free some by

deleting old photos or other files in the gallery.

The Nokia 7260 device supports an image capture resolution of 640 x 480 pixels. The image

resolution in these materials may appear different.

119

Taking a photo or a video clip

Press Menu, and select Media, Camera. The live image appears on the display, and

you can use the display as a viewfinder. Move the joystick to the left or to the right

to change the camera mode: Standard photo, Portrait photo or Video, or if the

lighting is dim for taking photos to Night mode. If you want to add the photo to a

name or a phone number saved in contacts, select Portrait photo.

Tip: To quickly open the camera viewfinder, move the joystick up in

standby mode.

• To take a photo, press Capture. A shutter sound is heard. The phone saves the

photo in the Images folder of the Gallery menu.

If You want to send the photo as a multimedia message, press Send, or select

Backto take another photo, or press Optionsand select, for example, an option

to zoom or rename the saved photo or send it as a multimedia message, to set

the contrast, to see the details, or to set the photo as wallpaper, or to open the

gallery, or to delete it.

Or if you want to delete the photo, press Delete.

Tip: You can activate the self-timer of the camera for one picture at a

time. Put the camera in photo mode, press Options and select Self-

timer. Press Start, and after the timeout, the camera takes the photo.

While the self-timer is running, a beeping sound is heard.

•To start recording a video clip, press Record. When you are recording a

video clip, the remaining recording time is shown on the top of the display.

120

To pause the recording, press Pause and to resume the recording, press

Continue. To stop the recording, press Stop. The phone saves the recording in

the Video clips folder of the Gallery menu. To view the recorded video clip,

press Play.

Select Back to start recording a new video clip, or press Options and select, for

example, an option to delete or rename the saved video clip, to set the

contrast, or to see the details, to send it as a multimedia message, or to open

the gallery, or to mute/unmute the microphone.

Camera settings

Press Menu, and select Media, Camera. Press Options and depending on the

active camera mode the following options may appear:

•

Change mode to change the camera mode.

Self-timer to activate the self-timer.

Mute/Unmute to mute or unmute the microphone in the video mode.

Open gallery to open the Gallery menu.

Settings to adjust the camera settings:

•

Default mode to define the default camera mode.

Image quality to define how much the photo file will be compressed when

saving the image. Select High, Normal or Basic. High provides the best

image quality but uses more memory.

•

Video clip length to select the length of the video clips that you record. The

maximum length of a video clip is approximately 50 seconds in duration,

121

depending on conditions. Only video clips that are of default length or

shorter can be sent in a multimedia message.

•

Camera sounds to set the shutter sound and the self-timer tone to On or

Off.

Default title to define the title that will be used when saving a photo or a

video clip. If you select Automatic, the default title will be used, or if you

select My title, you can key in or edit a new title.

Radio

The FM radio uses the wire of the headset as an antenna. A compatible headset needs to be

attached to the device for the FM radio to function properly.

Warning: Listen to music at a moderate level. Continuous exposure to high

volume may damage your hearing.

Warning: Do not hold the device near your ear when the loudspeaker is in use,

because the volume may be extremely loud.

To listen to the radio on your phone connect the compatible headset to the

headset connector on the bottom of the phone. The lead of the headset functions

as the radio antenna, so let it hang freely.

Note that the quality of the radio broadcast depends on the radio station’s

coverage in that particular area.

1. To turn on the radio, press Menu and select Media and Radio. On the display

are

122

• Channel location number and the name of the radio channel if you have

saved the channel.

• Frequency of the radio channel.

2. If you have already saved radio channels, you can scroll to the channel that you

would like to listen to, or select a radio channel location 1 to 9 by pressing the

corresponding number key.

When using the compatible headset supplied with the headset key, press the

key to scroll to the desired saved radio channel.

3. When the radio is on, press Options and select Switch off to turn off the radio.

Tip: To quickly turn off the radio, press and hold

Tuning a radio channel

When the radio is on, press and hold the joystick up or down to start the channel

search. Searching stops when a channel is found. To save the channel, press

Options, and select Save channel. Key in the name of the channel and press OK.

Select the location where you want to save the channel.

Tip: To quickly save the channel in a location 1 to 9, press and hold the

corresponding number key, then key in the name of the channel and press

OK.

Using the radio

When the radio is on, press Options and select

•

Switch off to turn off the radio.

123

•

Save channel to save the radio channel you have found, refer to Tuning a radio

channel above. Up to 20 radio channels can be saved.

Automatic tuning. Briefly move the joystick up or down to start the channel

search upwards or downwards. The search stops when a channel has been

found, press OK. To save the channel, see Save channel above.

•

Manual tuning. Briefly move the joystick up or down move the channel search

0.1 MHz upwards or downwards or press and hold down the keys to quickly

search upwards or downwards for a channel. To save the channel, press OKand

see Save channel above.

Tip: To quickly select Manual tuning, press

when in the Radio

menu.

•

Set frequency. If you know the frequency of the radio channel that you would

like to listen to (between 87.5 and 108.0 MHz), key it in and press OK. To save

the channel, see Save channel above.

Tip: To quickly select Set frequency, press

when in the Radio

menu.

•

Delete channel. To delete a saved channel, scroll to it, press Delete, and OK.

Rename. Key in a new name for the saved channel and press OK.

Loudspeaker (or Headset) to listen to the radio using the loudspeaker (or

headset). Keep the headset connected to the phone. The lead of the headset

functions as the radio antenna.

124

•

Mono output (or Stereo output) to listen to the radio in mono (or in stereo).

You can normally make a call or answer an incoming call while listening to the

radio. During the call, the volume of the radio is muted. When you end the call, the

radio volume will automatically be turned up again.

When you use the camera while listening to the radio, the radio is switched off.

After you have finished the camera application, the radio will be switched on

again, automatically.

When an application using an (E)GPRS or a HSCSD connection is sending or

receiving data, it may interfere with the radio.

Voice recorder

You can record pieces of speech, sound or an active call for up to 5 minutes. For

example, this is useful when recording a name and phone number for writing

down later.

The recorder cannot be used when a data call or GPRS connection is active.

Recording

1. Press Menu, select Media and Voice recorder.

2. To start the recording, select Record. To start the recording during a call, press

Options, and select Record. While recording a call, all parties to the call will

hear a faint beeping sound every 5 seconds approximately.

When recording a call, hold the phone in the normal position near to your ear.

3. To end the recording, press Stop. The recording will be saved in the Recordings

folder of the Gallery menu.

125

4. To listen to the latest recording, select Play last recorded.

5. To send to the latest recording, select Send last recorded. The recording can be

sent via IR or MMS.

List of recordings

Press Menu, and select Media, Voice recorder and Recordings list. The list of

folders in the Gallery is shown. Open Recordings to see the list with recordings.

Press Options and you can select some of the options for files in the Gallery. See

Gallery on page 117.

■ Organiser

Alarm clock

The alarm clock uses the time format set for the clock. The alarm clock works even

when the phone is switched off if there is enough power in the battery.

Press Menu, and select Organiser and Alarm clock.

• Select Alarm time, key in the alarm time and press OK.

To change the alarm time, select On.

• Select Repeat alarm to set the phone to alert you on selected days of the week.

• Select Alarm tone and select the default alarm tone, personalise the alarm

tone by selecting one from the ringing tone list or from Gallery, or set a radio

channel as the alarm tone.

126

If you select the radio as an alarm tone, connect the headset to the phone. The

phone uses the most recently listened-to channel as an alarm tone via the

loudspeaker. If the headset is removed, the default alarm tone will be used

instead of the radio.

When the alarm time expires

The phone will sound an alert tone, and flash Alarm! and the current time on the

display.

Press Stop to stop the alarm. If you let the phone continue to sound the alarm for

a minute or press Snooze, the alarm stops for about 10 minutes and then resumes.

If the alarm time is reached while the device is switched off, the device switches itself on

and starts sounding the alarm tone. If you press Stop, the device asks whether you want to

activate the device for calls. Press No to switch off the device or Yes to make and receive

calls. Do not press Yes when wireless phone use may cause interference or danger.

Calendar

The calendar helps you to keep track of reminders, calls that you need to make,

meetings, and birthdays.

The calendar uses shared memory, see Shared memory on page 14.

Press Menu, and select Organiser and Calendar.

Tip: To quickly open the Calendar menu, move the joystick to the right in

standby mode.

127

Scroll to the day that you want. The current day is indicated by a frame around the

day. If there are any notes set for the day, the day is in bold type. To view the day

notes, press View . To view a week, press Options and select Week view.

• To view a single note, scroll to the note that you want to view, press View. The

note view allows you to view the details of the selected note. You can scroll

through the note.

• For example, there are also options for creating a note, or for sending a note

via IR or as a note directly to another compatible phone’s calendar or as a text

message or a multimedia message.

There are options for deleting, editing, moving and repeating a note and for

copying a note to another day.

To delete all notes in the calendar, select the month or week view, press and

select Delete all notes.

Settings to set the date, time, date or time format, or the first day of the week.

In the Auto-delete option you can set the phone to delete old notes

automatically after a specified time. However, the repeat notes, for example,

birthday notes, will not be deleted.

Making a calendar note

For keying in letters and numbers, see Writing text on page 38.

Press Menu, and select Organiser and Calendar. Scroll to the date you want, press

Options and select Make a note. Select one of the following note types:

•

Meeting - Key in the note (or press Options and search for the name in

contacts) and press Save. Key in the location for the meeting and press Save.

128

Enter the start date and time, then enter the end date and end time for the

meeting. To set the alarm for the note, select With tone or Silent (no alarm

tone) and then set the alarm time.

•

Call - Key in the phone number, press Save. Key in the name, press Save.

(Instead of keying in the phone number, press Options to search for the name

and number in contacts.) Then enter the time for the call. To set the alarm for

the note, select With tone or Silent (no alarm tone) and then set the alarm

time.

Birthday - Key in the person’s name (or press Options and search for it in

contacts), press Save. Then key in the year of birth, and press OK. To set the

alarm for the note, select With tone or Silent (no alarm tone) and then set the

alarm time.

•

Memo - Key in the note, press Save. Enter the start and end date for the

note. To set the alarm for the note, select With tone or Silent (no alarm tone)

and then set the alarm time.

Reminder - Key in the subject for the reminder, press Save. To set the alarm

for the note, select Alarm on and then set the alarm time.

When you have set the alarm, the indicator

notes.

is displayed when you view the

When the phone sounds an alarm for a note

The phone beeps, and displays the note. With a call note

on the display, you

can call the displayed number by pressing

• To stop the alarm without viewing the note, press Exit.

129

• To stop the alarm and to view the note, press View. Press Snooze and the

phone sounds an alarm again after 10 minutes.

To-do list

You can save a note for a task that you have to do, select a priority level for the

note and mark it as done when you have completed it. You can sort the notes by

priority or by date.

The to-do list uses shared memory, see Shared memory on page 14.

Press Menu, and select Organiser and To-do list.

Press Add note to make a note. Key in the note and press Save. Select the priority

for the note, High, Medium, or Low. The phone automatically sets the deadline

without an alarm for the note. To change the deadline, view the note and select

the deadline option.

Or scroll to a note and press View or press Options.

• To add a new note, select Add.

• For example, you can also view and delete the selected note and delete all the

notes that you have marked as done. You can sort the notes by priority or by

deadline, send a note to another phone, save a note as a calendar note, or

access the calendar.

While viewing a note, you can also, for example, select an option to edit the

selected note, edit the deadline or priority for the note, or mark the note as

done.

130

Notes

You can use the Notes application for writing and sending notes to compatible

devices via IR or MMS.

The Notes application uses shared memory, see Shared memory on page 14.

Press Menu and select Organiser and Notes. The phone will ask you to set the date

and time, if they have not already been set when you start to write a note.

To add a note, press Add note or press Options and select Make a note. Key in the

note and select Save.

Or scroll to a note press View or press Options to see the options for notes.

Synchronisation

Synchronisation allows you to save your calendar and contacts data on a remote

Internet server (network service) or on a compatible PC. If you have saved data on

the remote Internet server, you can synchronise your phone by starting the

synchronisation from your phone. You can also synchronise the data in your

phone’s contacts, calendar and notes to correspond to the data of your

compatible PC by starting the synchronisation from your PC.

Note: The contact data in your SIM card will not be synchronised.

Answering an incoming call during synchronisation will end the

synchronisation and you will need to re-start it.

131

Synchronising from your phone

Before synchronising from your phone, you need to subscribe to a synchronisation

service and get the configuration settings from your provider. For more

information on availability and the synchronisation service settings, contact your

network operator or service provider.

To start the synchronisation from your phone:

1. Activate the connection settings you need for the synchronisation. See

Settings for the synchronisation from your phone on page 132.

2. Press Menu, select Organiser, Synchronisation, Server sync and Data to be

synchronised. Mark the data to be synchronised and press Done.

3. Press Menu, and select Organiser, Synchronisation, Server sync and

Synchronise.

4. The marked data of the active set will be synchronised after confirmation.

Note that synchronising for the first time or after an interrupted

synchronisation may take up to 30 minutes to complete, if the contacts or

calendar are full.

Settings for the synchronisation from your phone

You may receive the synchronisation settings as a configuration message from the

network operator or service provider. For more information on availability and the

synchronisation service settings, contact your network operator or service

provider. For receiving the settings as a configuration message, see Configuration

settings service on page 17. To key in the settings manually, see Configuration

settings on page 113.

132

Press Menu, select Organiser, Synchronisation and Server sync and Sync settings.

Select

1. Configuration and scroll to the service provider whose settings you would like

to activate and press Select.

2. Account to see the accounts provided by the service provider. If more than one

account is displayed choose the one you want to use.

Synchronising from your compatible PC

To synchronise contacts, the calendar and the notes from your PC, use either an IR

connection or a data cable. You also need the PC Suite software of your phone

installed on your PC. Start the synchronisation from your PC using PC suite. Nokia

PC Suite id available on Nokia’s Web site at www.nokia.com.

Ensure that the phone is in standby mode and that the time and date are set.

■ Applications

Games and applications

Your phone software may include some games and applications specially designed

for this Nokia phone.

Launching a game or an application

Press Menu, and select Applications, Games or Collection. Scroll to a game or an

application and press Open.

133

Note that running some games or applications may consume the phone’s battery

faster (and you may need to connect the phone to the charger).

Options available for a game or an application

Press Menu, and select Applications, Games or Collection. Scroll to a game or an

application and press Options. The following options may be available:

•

Delete to delete the game or application from the phone.

Note that if you delete a pre-installed game or application from your phone,

you may download it again to your phone from the support area on the Nokia

website www.nokia.com.

•

Details to give additional information about the game or application.

Update version to check if a new version is available for download from the

services (network service).

•

Web page to provide further information or additional data from an Internet

page. This feature needs to be supported by the network. It is only shown if an

Internet address has been provided with the game or application.

App. access to restrict the game or application from accessing the network to

prevent you from accruing unexpected costs. Select Communication and

Network access , Messaging or Connectivity, or select Phone access or Auto-

start. Select in each category, if available, one of the following permissions:

•

Ask every time and the phone asks always for net access.

Ask first time only and the phone asks on first attempt at net access.

Always allowed to allow net access.

134

•

Not allowed to disallow net access.

Downloading a game or an application

Your phone supports J2ME^TMJava applications. Make sure that the application is

compatible with your phone before downloading it.

Important: Only install applications from sources that offer adequate protection

against harmful software.

You can download new Java applications in different ways:

• Press Menu, and select Applications, Games and Game downloads, or

Collection and App. downloads and the list of available bookmarks is shown.

Select More bookmarks to access the list of bookmarks in the Services menu,

see Bookmarks on page 150.

Select the appropriate bookmark to connect to the desired page. If the

connection fails, you may not be able to access the page from the service

whose connection settings are currently active. In this case, enter the Services

menu and activate another set of service settings, see Making a connection to

a service on page 146. Try again to connect to the page.

For the availability of different services, pricing and tariffs, contact your

network operator and/or the service provider.

• Press Menu, and select Services and Download links. See Downloading on page

151.

• Use the Nokia Application installer from PC Suite to download the applications

in your phone.

135

Note that Nokia does not warrant for applications from non-Nokia sites. If you

choose to download Java applications from them, you should take the same

precautions, for security or content, as you would with any site.

Note that when downloading an application, it may be saved in the Games menu

instead of the Applications menu.

Game settings

Press Menu, and select Applications, Games and App. settings to set sounds, lights

and shakes for games.

Memory status for games and applications

To view the amount of memory available for game and application installations

(third shared memory), press Menu, and select Applications, Games or Collection

and then Memory.

The games and applications use shared memory, see Shared memory on page 14.

Calculator

The calculator in your phone adds, subtracts, multiplies, divides, calculates the

square and the square root and converts currency values.

Note: This calculator has limited accuracy and is designed for simple calculations.

1.Press Menu, and select Applications, Extras and Calculator.

2. When ’0’ is displayed on the screen, key in the first number in the calculation,

press

for a decimal point.

136

3. PressOptions and select Add, Subtract, Multiply, Divide, Square, Square root or

Change sign.

Tip: Alternatively, press

to multiply or four times to divide.

4. Key in the second number.

once to add, twice to subtract, three times

5. To get the answer, press Equals. Repeat steps 3 to 5 as many times as is

necessary.

6. To start a new calculation, first press and hold Clear.

Performing a currency conversion

1. Press Menu, and select Applications, Extras and Calculator.

2. To save the exchange rate, press Options and select Exchange rate. Select

either of the displayed options. Key in the exchange rate, press

for a

decimal point, and press OK. The exchange rate remains in the memory until

you replace it with another one.

3. To perform the currency conversion, key in the amount to be converted, press

Options and select In domestic or In foreign.

Note: When you change base currency, you must key in the new rates because all

previously set exchange rates are set to zero.

Tip: You can also perform the currency conversion in standby mode. Key in

the amount to be converted, press Options and select In domestic or In

foreign.

137

Countdown timer

Press Menu, and select Applications, Extras and Countdown timer. Key in the

alarm time in hours, minutes and seconds and press OK. If you wish, write your

own note text which is displayed when the time expires, and press Start to start

the countdown timer.

• To change the countdown time, select Change time, or to stop the timer, select

Stop timer.

If the alarm time is reached when the phone is in standby mode, the phone sounds

a tone and flashes the note text if it is set or else Countdown time up. Stop the

alarm by pressing any key. If no key is pressed, the alarm automatically stops

within 30 seconds. To stop the alarm and to delete the note text, press Exit.

Stopwatch

You can measure time, take intermediate times or lap times using the stopwatch.

During timing, the other functions of the phone can be used. To set the stopwatch

timing in the background, press

Using the stopwatch or allowing it to run in the background when using other features

increases the demand on battery power and reduces the battery life.

Time observation and time splitting

1. Press Menu, and select Applications, Extras, Stopwatch and Split timing. You

can select Continue if you have set the timing in the background.

138

2. Press Start to start the time observation. Press Split every time you want to

take an intermediate time. The intermediate times are listed below the running

time on the display. Scroll to view the times.

3. Press Stop to stop the time observation.

4. To save the times, press Save and enter a name.

Or press Options and select Start to start the time observation again. The new

time is added to the previous time. Select Reset to reset the time without

saving it.

Lap times

Press Menu, and select Applications, Extras, Stopwatch and Lap timing. Press

Start to start the time observation and Lap to take a lap time. Press Stop to stop

the lap timing. To save the times, press Save and enter a name. Or press Options

and you can start or reset the lap times. Refer to Time observation and time

splitting on page 138.

Viewing and deleting times

Press Menu, and select Applications, Extras and Stopwatch.

If the stopwatch is not reset, you can select Show last to view the most recent

measured time. Select View times and a list of names or final times of the time

sets is shown, select the time set that you want to view.

To delete the saved times, select Delete times. Select Delete all and press OK, or

select One by one, scroll to the times you want to delete, press Delete and press

OK.

139

Wallet

In Wallet you can save personal information, for example, credit card numbers

and addresses. The data that are saved in the wallet can easily be retrieved while

browsing to automatically fill in data fields, for example, when making purchases

and the service supports wallet functionality. You can also save access codes to

mobile services that request a user name and password.

The data in the wallet are protected with a wallet code that you can define when

you access wallet for the first time. At Create wallet code: key in the code and

press OK to confirm it and at Verify wallet code: key in the code again and press

OK. See also Wallet code (4 to 10 digits) on page 16.

If you want to delete all the content of the wallet and the wallet code, key in

*#7370925538# (*#res wallet# in letters) in standby mode. You also need the

phone’s security code, see Access codes on page 15.

To add the content into the wallet menu, and to edit it, access the wallet menu. To

use the content of the wallet in a mobile service, access the wallet via the

browser, see Services on page 144.

Accessing the wallet menu

To access the wallet menu, press Menu, select Applications, Extras and Wallet.

Key in your wallet code and press OK, see Wallet settings on page 143. Select

•

Wallet profiles to create card combinations, for example, for different services.

A wallet profile is helpful if the service asks for many data items to be filled in.

You can select the appropriate wallet profile instead of selecting different

cards separately.

140

•

Cards to save personal card information. You can save payment card, loyalty

card and access card information, for example username and password

combinations for different services, and also addresses and user data. See

Saving card details on page 141.

Tickets to save the notifications of e-tickets that you have bought via a mobile

service. To view the tickets, press Options and select View.

•

Receipts to save receipts of mobile purchases.

Personal notes to save all kinds of personal information that you want to keep

protected by the wallet PIN code. See Personal notes on page 141.

•

Settings, see Wallet settings on page 143.

Saving card details

Access the wallet and select Cards. Select the card type to save details: Payment

cards, Loyalty cards, Access cards, User info cards, or Address cards. If no card is

added, press Add new, otherwise, press Options and select Add new. Fill in the

fields for the details and press Done.

If supported by your service provider, you can also receive card information to

your phone as a configuration message. You will be notified as to which category

the card belongs to. For availability of receiving card information as configuration

settings, contact the card issuer or service provider.

Personal notes

You can save personal notes, for example, account numbers, passwords, codes or

notations.

141

Access the wallet and select Personal notes. Press Options and you can view, add,

edit a selected note and sort notes either by name or date or delete notes. When

viewing a note, you can edit or delete the selected note. The option Send via text

msg. is for copying the note as a text message and Copy to calendar is for copying

the note to the calendar as a memo. Use detail is for extracting numbers, e-mail

addresses and web addresses from a note.

Creating a wallet profile

When you have saved your personal card details, you can combine them together

into a wallet profile. You can use the profile to retrieve wallet data from different

cards while browsing.

1. Access the wallet and select Wallet profiles.

2. To create a new wallet profile if no profile is added, press Add new. Otherwise,

press Options and select Add new.

3. Fill in the following fields and press Done. Some of the fields contain data that

are selected from the wallet. You need to save those data before you can

create a wallet profile.

•

Select payment card next - select a card from the payment card list.

Select loyalty card next - select a card from the loyalty card list.

Select access card next - select a card from the access card list.

Select user info card next - select a card from the user data card list.

Select billing address next - select an address from the address card list.

Select shipping address next - select an address from the address card list.

142

•

Select receipt delivery address next - select an address from the address

card list.

Select receipt delivery method next - select how the receipt is to be

delivered, To phone number or To e-mail address.

Wallet profile name: enter a name for the profile.

Some of the fields contain data that are selected from the wallet. You need to

save those data before you can create a wallet profile.

Wallet settings

Access the wallet and select Settings. Select Change code to change the wallet

code. Select RFID to set the RFID ID with the RFID code and RFID type. (RFID =

Radio Frequency Identification, technology to securely conduct commercial

transactions using your phone).

Guidelines for paying for your purchases with the wallet

• To do your shopping, access the desired service site that supports the wallet.

The service needs to support the Electronic Commerce Modelling Language

specification. See Making a connection to a service on page 146.

Choose the product that you want to buy and carefully read all information

provided before your purchase.

The text may not fit within a single screen. Therefore, make sure to scroll

through and read all of the text before your purchase.

• To pay for the items that you wish to buy, the phone asks whether you want to

use wallet or not. The phone also asks for your wallet PIN code.

143

• Select the card that you want to pay with from the Payment cards list.

Provided that the data form you receive from the service provider supports the

Electronic Commerce Modelling Language specification, the phone

automatically fills in the credit card information or the wallet profile from the

wallet.

• Approve the purchase, and the information is forwarded.

• You may receive an acknowledgement or a digital receipt of the purchase.

• To close the wallet, select Close wallet. If you do not use the wallet for 5

minutes, it will be automatically closed.

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache.

To empty the cache, see The cache memory on page 153.

■ Services

You can access various mobile Internet services with your

phone’s browser. These services may include for example,

weather reports, news or flight times and financial

information.

Check the availability of these services, pricing and tariffs with your network

operator and/or the service provider whose service you wish to use. Service

providers will also give you instructions on how to use their services.

144

With your phone’s browser you can view the services that use Wireless Mark-Up

Language (WML) or extensible HyperText Mark-up Language (xHTML) on their

pages. Appearance may vary due to screen size. Note that you may not be able to

view all the details of the Internet pages.

Basic steps for accessing and using services

1. Save the service settings that are required to access the service that you want

to use. See page 145.

2. Make a connection to the given service. See page 146.

3. Start browsing the pages of the service. See page 147.

4. Once you are finished browsing, end the connection to the service. See page

148.

Setting up the phone for a service

Your phone may have stored some service settings. Additional settings may be

received as a configuration message from the network operator or service provider

that offers the service that you want to use.

To receive the service settings as a configuration message, see Configuration

settings service on page 17 and Configuration settings on page 113.

For more information and for the appropriate settings, contact the network

operator or service provider that offers the service that you want to use.

145

Making a connection to a service

1. Make sure that the service settings of the service you want to use are

activated. To activate the settings:

Press Menu, and select Services, Settings and Configuration settings. Select

Configuration and select the configuration set you want to activate.

2. Make a connection to the service. There are three ways to connect:

• Open the start page, for example, the homepage of the service provider:

Press Menu, and select Services and Home, or in standby mode press and

hold

• Select a bookmark of the service:

Press Menu, and select Services, Bookmarks, and select a bookmark.

If the bookmark does not work with the current active service settings,

activate another set of service settings and try again.

• Select the last URL:

Press Menu, and select Services, Last web addr..

• Key in the address of the service:

Press Menu, and select Services and then Go to address. Key in the address

of the service and press OK.

146

Browsing the pages of a service

After you have made a connection to the service, you can start browsing its pages.

The function of the phone keys may vary in different services. Follow the text

guides on the phone display. For more information, contact your service provider.

Note that if GPRS is selected as the data bearer, the indicator

top left of the display during browsing. If you receive a call or a text message, or

make a call during an (E)GPRS connection, the indicator will be shown on the

is shown on the

top left of the display to indicate that the (E)GPRS connection is suspended (on

hold). After a call, for example, the phone tries to reconnect the (E)GPRS

connection.

Using the phone keys while browsing

• Use the joystick to browse through the page.

• To select a highlighted item, press , or press Options to select the option for

opening the link.

• To enter letters and numbers, press the keys

and to enter special

characters, press the key

Options while browsing

Press Options and the following options may be available. The service provider

may also offer other options. Select

•

Shortcuts to open a new list of options that are, for example, specific to the

page.

Home to open the home page of the selected service provider.

147

•

Add bookmark to save the page as a bookmark.

Bookmarks. See Bookmarks on page 150.

History to get a list showing last visited URLs.

Download links to show the list of bookmarks for downloading.

Save to folder to save the current page to a download folder.

Other options to show a list of other options, for example options for some

security options.

•

Reload to reload and update the current page.

Quit. See Disconnect from a service on page 148.

A cache is a memory location that is used to store data temporarily. If you have tried to

access or have accessed confidential information requiring passwords, empty the cache

after each use. The information or services you have accessed is stored in the cache. To

empty the cache, see The cache memory on page 153.

Direct calling

The browser supports functions that you can access while browsing. You can make

a voice call, send DTMF tones while a voice call is in progress, and save a name and

a phone number from a page.

Disconnect from a service

To quit browsing and to end the connection, press Options and select Quit. When

Quit browsing? is shown, press Yes.

Alternatively, press twice, or press and hold

148

Appearance settings of the browser

While browsing, press Options and select Other options and Appear. settings, or in

standby mode, press Menu, and select Services, Settings and Appearance settings.

Select

•

Text wrapping. Select On and the text continues on the next line. If you select

Off, the text will be abbreviated.

•

Font size and choose a size.

Show images. Select No and any pictures appearing on the page are not shown.

This can speed up the browsing of pages that contain a lot of pictures.

•

Alerts and select Alert for unsecure connection and Yes to set the phone to

alert when a secure connection changes to an insecure one during browsing.

Select Alert for unsecure items and Yes to set the phone to alert when a secure

page contains an insecure item. Note that these alerts do not guarantee a

secure connection. For more information, see Browser security on page 153.

•

Character encoding to select the character set that the phone uses for showing

browser pages that do not include that information or to select whether to

always use UTF-8 encoding when sending a Web address to a compatible

phone.

A cookie is data that a site saves in your phone’s browser cache memory. The data

can be, for example, your user information or your browsing preferences. Cookies

149

will be saved until you clear the cache memory, see The cache memory on page

153.

1. While browsing, press Options and select Other options, Security and Cookie

settings,

or in standby mode, press Menu, and select Services, Settings, Security settings

and Cookies.

2. Select Allow or Reject to allow the phone to or prevent the phone from

receiving cookies.

Bookmarks

You can save page addresses as bookmarks in the phone’s memory.

1. While browsing, press Options and select Bookmarks,

or in standby mode, press Menu, and select Services and Bookmarks.

2. Scroll to the bookmark that you want to use and press Select to make a

connection to the page associated with the bookmark.

Or select Options to view the title and the address of the selected bookmark,

edit or delete the selected bookmark, or send it directly to another phone as a

bookmark, or as a text message, or create a new bookmark.

Your device may have some bookmarks loaded for sites not affiliated to Nokia. Nokia does

not warrant or endorse these sites. If you choose to access them, you should take the same

precautions, for security or content, as you would with any Internet site.

150

Receiving a bookmark

When you have received a bookmark (sent as a bookmark) 1 bookmark received is

displayed. Press Show to view the bookmark To save the bookmark, press Save, or

press Options and select View to see the details or Delete to discard it. To discard

the bookmark directly after you have received the bookmark, press Exit and OK.

Downloading

To download more tones, graphics, games, videos, themes or applications to your

phone (network service), press Menu, and select Services and Download links.

Select Tone downloads, Graphic downloads, Game downloads, Video downloads,

Theme downloads or App. downloads.

Important: Only install applications from sources that offer adequate protection

against harmful software.

For the availability of different services, pricing and tariffs, contact your network

operator and/or service provider.

Service inbox

The phone is able to receive service messages (pushed messages) sent by your

service provider (network service). Service messages are notifications of, for

example, news headlines, and they may contain a text message or an address of a

service.

To access the Service inbox in standby mode, when you have received a service

message, press Show.

151

If you press Exit the message is moved to the Service inbox. To access the Service

inbox later, press Menu, and select Services and Service inbox.

To access the Service inbox while browsing, press Options and select Other

options and Service inbox. Scroll to the message that you want, press Retrieve to

activate the browser and download the marked content, or press Options and

select Details to display detailed information on the service notification, or select

Delete to delete it.

Service inbox settings

Press Menu, and select Services, Settings and Service inbox settings.

• Select Service messages and On (or Off) to set the phone to receive (or not to

receive) service messages.

• Select Message filter and On to set the phone to receive service messages only

from content authors approved by the service provider. To view the list of the

approved content authors, select Trusted channels.

• Select Automatic connection. If you have set the phone to receive service

messages and select On, the phone will automatically activate the browser

from standby mode when the phone has received a service message.

If you select Off, the phone will activate the browser only after you have

selected Retrieve when the phone has received a service message.

152

The cache memory

The information or services that you have accessed are stored in the cache of your

phone. A cache is a buffer memory, which is used to store data temporarily. To

empty the cache:

• while browsing, press Options and select Other options and Clear the cache, or

• in standby mode, press Menu, and select Services, and Clear the cache.

Browser security

Security features may be required for some services, such as banking services or

online shopping. For such connections you need security certificates and possibly

a security module which may be available on your SIM card. For more information,

contact your service provider.

Security module

The security module can contain certificates as well as private and public keys. The

purpose of the security module is to improve security services for applications

requiring browser connection, and it allows you to use a digital signature. The

certificates are saved in the security module by the service provider.

Press Menu and select Services, Settings, Security settings and Security module

settings. Select

•

Security module details to show the security module title, its status,

manufacturer and serial number.

153

•

Module PIN request to set the phone to request the module PIN when using

services provided by security module. Key in the code and select On. To disable

the module PIN request, select Off.

•

Change module PIN to change the module PIN, if allowed by the security

module. Enter the current module PIN code, then enter the new code twice.

Change signing PIN. Select the signing PIN that you want to change. Enter the

current PIN code, then enter the new code twice.