Panasonic CQ RX400U User Manual

Operating Instructions  
AAC WMA MP3 CD Player/Receiver  
Model: CQ-RX400U  
WMA MP3 CD Player/Receiver  
Model: CQ-RX200U/CQ-RX100U/  
CQ-RX100L  
(CQ-RX400U)  
(CQ-RX400U)  
• Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product  
and keep this manual for future reference.  
Accessories  
Q’ty  
Q’ty  
Installation kit (YEP0FZ5698)  
Instruction kit  
\CQ-RX400U\ \CQ-RX200U\ \CQ-RX100U\  
Lock Cancel Plate  
Operating Instructions  
(English: YGFM286048)  
(Français: YGFM286049)  
(Español: YGFM286050)  
1 set  
Mounting Bolt (5 mm œ)  
1 set  
Rubber Bushing  
XXXXXXXXXXXXXXX  
XXXXXXXXXXXXXXXXX  
XXXXXXXXXXXXXX  
1
XXXXXXXXXXXXXXXX  
\CQ-RX400U\ \CQ-RX200U\  
System Upgrade Guidebook  
(YGFM262850)  
OO-OOOOO  
Installation Instructions  
(YGFM294416)  
1
1
1
Q’ty  
1
Mounting Collar  
(YEFX0217263A)  
Product Registration Card  
Trim Plate  
(YGFC051023)  
1
1
Customer Care Plan  
Power Connector  
(K1HY12YY0003)  
Q’ty  
Instruction kit \CQ-RX100L\  
Operating Instructions  
Remote Control Unit (includes a  
battery)  
(EUR7641010)  
1
1
1 set  
(English: YGFM286048)  
(Español: YGFM286050)  
\CQ-RX400U\ \CQ-RX100L\  
Removable Face Plate Case  
(YGFA134302)  
Installation Instructions  
(YGFM294416)  
1
Notes:  
• The number in parentheses underneath each accessory part  
name is the part number for maintenance and service.  
• Accessories and their part numbers are subject to modification  
without prior notice due to improvements.  
• Mounting Collar and Trim Plate are mounted on the main unit at  
shipment.  
\CQ-RX200U\ \CQ-RX100U\  
Request for use of the Removable Face Plate Case:  
• To avoid trouble and ensure safety, use the optional Removable  
Face Plate Case (YGFA134302).  
- 1 -  
Features  
Expansion Module (Hub Unit)  
SQ (Sound Quality)  
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ, CLUB). You  
can customize your settings for these and save them for instant recall.  
SQ3 (3-Band Sound Quality)  
\CQ-RX400U\ \CQ-RX200U\  
Connection of the Expansion Module (hub unit, CY-EM100U) allows  
users to connect up to 4 optional devices shown below.  
Center frequency and level are adjustable in each of 3 bands. This lets  
you fine-tune sound quality for each genre to suit car-interior acoustics  
and your personal preferences. (« “Sound Control”)  
Wide Array of Components for System Upgrade  
\CQ-RX400U\ \CQ-RX200U\  
Various optional components allow users to obtain availability of  
wide range of system upgrade. Upgrading the system delivers  
relaxed AV space in a car. For further information, refer to the  
separate System Upgrade Guidebook.  
USB Connector  
\CQ-RX400U\  
The USB Connector is equipped on the front panel.  
(« System Upgrade Guidebook)  
By connecting a USB memory (not included) to USB connector via a  
USB extension cable (USB 2.0, not included), you can enjoy MP3/  
WMA/AAC files stored on the USB memory (not included) in your car.  
iPod®  
The optional adaptor (Direct Cable for iPod®: CA-DC300U) allows  
you to connect the optional iPod series.  
iPod is a trademark of Apple Inc., registered in the U.S. and other  
countries.  
By connecting iPod series to USB connector via a USB extension cable  
for iPod (USB 2.0, not included), you can enjoy music files stored on  
the iPod series in your car.  
• CD Changer  
The optional adaptor (Conversion Cable for DVD/CD Changer:  
CA-CC30U) allows you to connect the optional Panasonic CD  
changer unit (CX-DP880U).  
AUX (AUX1) Input Terminal  
The AUX input terminal is equipped on the front panel.  
Your mobile audio player and other devices are connectable to this unit  
without any difficulty.  
XM Satellite Radio  
You can connect the optional XM receiver (XMD1000) with  
optional Digital Adaptor Cable (XMDPAN110).  
You can connect the optional XM Direct2 (CNP2000UC) with  
optional Connection Cable (CNPPAN1).  
For details, refer to the operating instructions for the XM receiver.  
Sirius Satellite Radio  
You can connect the optional Sirius Satellite Radio receiver  
(SC-C1) with optional Interface Adaptor (CA-LSR01U).  
Note: The optional Sirius Satellite Radio receiver SIR-PAN1/the  
optional Interface Adaptor CA-PANSC1U cannot be used with this  
unit.  
Bluetooth®  
Using the optional Bluetooth® Unit (CY-BT200U) and a Bluetooth®  
device enables hands-free telephony and Bluetooth® Audio listening  
with this unit.  
Note: This unit does not support CY-BT100U.  
Bluetooth®  
The Bluetooth word mark and logo are owned by the Bluetooth SIG,  
Inc. and any use of such marks by Matsushita Electric Industrial Co.,  
Ltd. is under license. Other trademarks and trade name are those of  
their respective owners.  
- 3 -  
Before Reading These Instructions  
Panasonic welcomes you to our constantly growing family of electronic products owners.  
We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and  
assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of  
enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.  
\CQ-RX400U\ \CQ-RX200U\  
The instruction manual consists of 2 books. One is “Operating Instructions” describing the operations of the main unit.  
The other is “System Upgrade Guidebook” describing the optional devices such as CD changer.  
Differences Among 4 Models  
This operating instruction manual is for 4 models CQ-RX400U, CQ-RX200U, CQ-RX100U and CQ-RX100L. All illustrations throughout this  
manual represent model CQ-RX400U unless otherwise specified. The following table describes the differences among 4 models.  
Models  
CQ-RX400U  
Included  
CQ-RX200U  
Not included  
CQ-RX100U  
Not included  
CQ-RX100L  
Included  
Features  
Removable Face Plate Case  
System Upgrade Guidebook  
System-up Connector  
Preamp Out Connector  
USB Connector  
Included  
Included  
Supported  
1 (Rear)  
Not included  
Not Supported  
1 (Rear)  
Not included  
Not Supported  
1 (Rear)  
Supported  
2 (Front/Rear)  
Supported (USB iPod) Not Supported  
Not Supported  
Not Supported  
Blue  
Not Supported  
Not Supported  
Red  
AAC playback  
Supported  
Blue  
Not Supported  
Blue  
Button Logo Color  
Service in Puerto Rico  
Panasonic Puerto Rico, Inc.  
Panasonic Sales Company  
Factory Servicenter:  
Ave. 65 de Infantería, Km. 9.5, San Gabriel Industrial Park,  
Carolina, Puerto Rico 00985  
Phone (787) 750-4300, Fax (787) 768-2910  
U.S.A.  
Obtain Product Information and Operating Assistance;  
locate your nearest Dealer or Servicenter; purchase Parts  
and Accessories; or make Customer Service and Literature  
requests by visiting our Web Site at:  
or, contact us via the web at:  
You may also contact us directly at:  
1-800-211-PANA (7262),  
CANADA  
WARRANTY SERVICE  
FOR PRODUCT OPERATION ASSISTANCE, please contact:  
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST.  
Our Customer Care Centre:  
For hearing or speech impaired TTY users, TTY : 1-877-833-8855  
Telephone #:  
1-800 #:  
(905) 624-5505  
1-800-561-5505  
Accessory Purchases:  
Purchase Parts, Accessories and Instruction Books online for  
all Panasonic Products by visiting our Web Site at:  
Fax #:  
Email link:  
(905) 238-2360  
or, send your request by E-mail to:  
You may also contact us directly at:  
FOR PRODUCT REPAIRS, please locate your nearest  
Authorized Servicentre at www.panasonic.ca:  
1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only)  
(Monday-Friday 9 am to 8 pm, EST.)  
Panasonic Services Company  
20421 84th Avenue South, Kent, WA 98032  
(We accept Visa, MasterCard, Discover Card, American  
Express, and Personal Checks)  
Link : “Servicentres™ locator” under “Customer support”  
IF YOU SHIP THE PRODUCT TO A SERVICENTRE  
Carefully pack and send prepaid, adequately insured and  
preferably in the original carton.  
Include details of the defect claimed, and proof of date of  
original purchase.  
For hearing or speech impaired TTY users, TTY : 1-866-605-1277  
- 4 -  
Some states do not allow the exclusion or limitation of incidental or  
consequential damages, or limitations on how long an implied warranty  
lasts, so the exclusions may not apply to you.  
U.S.A.  
PANASONIC CONSUMER ELECTRONICS COMPANY,  
DIVISION OF PANASONIC CORPORATION OF NORTH AMERICA  
One Panasonic Way, Secaucus, New Jersey 07094  
This warranty gives you specific legal rights and you may also have  
other rights which vary from state to state. If a problem with this product  
develops during or after the warranty period, you may contact your dealer  
or Servicenter. If the problem is not handled to your satisfaction, then  
write to warrantor’s Consumer Affairs Department at the addresses of the  
warrantor.  
PANASONIC SALES COMPANY,  
DIVISION OF PANASONIC PUERTO RICO, INC.  
Ave. 65 de infanteria, Km. 9.5, San Gabriel Industrial Park  
Carolina, Puerto Rico 00985  
PANASONIC AUTO PRODUCTS  
LIMITED WARRANTY  
PARTS AND SERVICE WHICH ARE NOT COVERED BY THIS LIMITED  
WARRANTY ARE YOUR RESPONSIBILITY.  
LIMITED WARRANTY COVERAGE  
If your product does not work properly because of defects in materials and  
workmanship.  
Panasonic Consumer Electronics Company or Panasonic Sales Company  
(collectively referred to as “the warrantor”) will, for the length of the period  
indicated in the chart below, which starts with the date of original purchase  
(“warranty period”), at its option either (a) repair your product with new or  
refurbished parts, or (b) replace it with a new or refurbished product. The  
decision to repair or replace will be made by the warrantor.  
Customer’s Record  
Model  
No.  
Serial  
No.  
Dealer’s  
No.  
Code  
No.  
Categories  
Parts  
Labor  
Dealer’s  
Address  
Date of  
Purchase  
Audio Components (except items listed  
below)  
MXE Series Audio Components (except  
One (1) Year  
One (1) Year  
Two (2) Years  
One (1) Year  
Two (2) Years  
Not Applicable  
items listed below)  
Speakers  
Defective Car Audio Speakers under  
warranty must be exchanged at the place of  
purchase. Contact your Dealer for details.  
Accessories (in exchange for defective  
items)  
CANADA  
Panasonic Canada Inc.  
Ninety (90) Days  
Not Applicable  
5770 Ambler Drive, Mississauga Ontario L4W 2T3  
During the “Labor” warranty period, there will be no charge for labor.  
During the “Parts” warranty period, there will be no charge for parts. You  
must carry-in or mail-in your product prepaid during the warranty period.  
If nonrechargeable batteries are included, they are not warranted. This  
warranty only applies to products purchased and serviced in the United  
States or Puerto Rico. This warranty is extended only to the original  
purchaser of a new product which was not sold “as is”. A purchase receipt  
or other proof of the original purchase date is required for warranty service.  
PANASONIC PRODUCT LIMITED WARRANTY  
Panasonic Canada Inc. warrants this product to be free from defects in  
materials and workmanship and agrees to remedy any such defect for a  
period as stated below from the date of original purchase.  
CAR AUDIO PRODUCT – ONE (1) YEAR, PARTS AND LABOUR  
(The labour to install or remove the product is not warranted)  
ACCESSORIES - NINETY (90) DAYS, (IN EXCHANGE FOR DEFECTIVE  
ITEMS)  
CARRY-IN OR MAIL-IN SERVICE  
For Carry-In or Mail-In Service in the United States, call 1-800-211-PANA  
(7262) or visit  
For assistance in Puerto Rico, call Panasonic Sales Company (787)-750-  
4300 or fax (787)-768-2910.  
LIMITATIONS AND EXCLUSIONS  
This warranty does not apply to products purchased outside Canada or to  
any product which has been improperly installed, subjected to usage for  
which the product was not designed, misused or abused, damaged during  
shipping, or which has been altered or repaired in any way that affects the  
reliability or detracts from the performance, nor does it cover any product  
which is used commercially. Dry cell batteries are also excluded from  
coverage under this warranty.  
This warranty is extended to the original end user purchaser only. A  
purchase receipt or other proof of the original purchase date is required  
before warranty service is performed.  
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE.  
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY  
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.  
In certain instances, some jurisdictions do not allow the exclusion or  
limitation of incidental or consequential damages, or the exclusion of  
implied warranties, so the above limitations and exclusions may not be  
applicable.  
LIMITED WARRANTY LIMITS AND EXCLUSIONS  
This warranty ONLY COVERS failures due to defects in materials and  
workmanship, and DOES NOT COVER normal wear and tear or cosmetic  
damage. The warranty ALSO DOES NOT COVER damages which occurred  
during shipment, failures which are caused by products not supplied by the  
warrantor, failures which result from accident, misuse, abuse, neglect, bug  
infestation, mishandling, misapplication, alteration, faulty installation, set-  
up adjustment, maladjustment of consumer control, improper maintenance,  
improper antenna, inadequate signal reception or pickup, power line surge,  
improper voltage supply, lightning, modification, commercial use (such  
as use in hotels, offices, restaurants, or other business uses) or rental  
use of the product, or service by anyone other than the technician from  
Factory Servicenter or other authorized service centers, or damage that is  
attributable to acts of God.  
THERE ARE NO EXPRESS WARRANTIES EXCEPT AS LISTED UNDER  
“LIMITED WARRANTY COVERAGE”. THE WARRANTOR IS NOT LIABLE  
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM  
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY BREACH OF  
THIS WARRANTY. (As examples, this excludes damages for lost time,  
cost of having someone remove or re-install an installed unit if applicable,  
travel to and from the sevicer, and loss of media, data or other memory  
contents. The items listed are not exclusive, but are for illustration only.)  
ALL EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE WARRANTY  
OF MERCHANTABILITY, ARE LIMITED TO THE PERIOD OF THE LIMITED  
WARRANTY.  
- 5 -  
Maintenance/Fuse  
Your product is designed and manufactured to ensure the minimum of maintenance. Use a dry, soft cloth for routine exterior  
cleaning. Never use benzine, thinner, or other solvents.  
If the fuse blows out, consult your dealer, or your nearest authorized Panasonic Servicenter.  
Warning  
• Use fuses of the same specified rating (15 A). Using substitutes or fuses with higher ratings, or connecting the unit  
directly without a fuse could cause fire or damage to the unit. If the replaced fuse fails, contact your nearest  
authorized Panasonic Servicenter.  
Anti-Theft System  
This unit is equipped with a removable face plate. Removing this face plate makes the unit totally inoperable.  
Notes:  
• Do not touch the contacts on the face plate and the main  
unit, since this may result in poor electrical contact.  
• If dirt or other foreign substances get on the contacts,  
wipe them off with a clean and dry cloth.  
Removing  
Mounting  
Turn off the power.  
Slide the left side of the face plate in  
1
1place.  
Press []. The face plate will open.  
2
3
Press the right end of face plate until a  
2“click” is heard.  
Pull it out toward you.  
\CQ-RX400U\ \CQ-RX100L\  
Put the face plate in the case.  
4
- 6 -  
Specifications  
General  
FM Radio  
Power supply  
:DC 12 V (11 V – 16 V DC), test  
Frequency range  
:87.9 MHz – 107.9 MHz  
:10.2 dBf. (0.9 μV, 75 j)  
:15.2 dBf. (1.6 μV, 75 j)  
:30 Hz – 15 kHz ( 3 dB)  
voltage 14.4 V, negative ground  
:Less than 2.1 A  
Usable sensitivity  
Current consumption  
Maximum power output  
50 dB quieting sensitivity  
Frequency response  
(CD mode; 0.5 W x 4 channels)  
:50 W x 4 channels (at 1 kHz),  
volume control maximum  
Alternate channel selectivity :75 dB  
Stereo separation  
Image rejection ratio  
IF rejection ratio  
:35 dB (at 1 kHz)  
Tone/SQ adjustment range :SQ Low/Bass: 12 dB  
:55 dB  
:100 dB  
:62 dB  
(at 60 Hz, 80 Hz, 100 Hz, 200 Hz)  
SQ Mid: 12 dB  
Signal/noise ratio  
(at 500 Hz, 1 kHz, 2 kHz, 3 kHz)  
SQ High/Treble: 12 dB  
(at 10 kHz, 12 kHz, 15 kHz, 18 kHz)  
:4 – 8 j  
AM Radio  
Frequency range  
Usable sensitivity  
Speaker impedance  
Pre-amp output voltage  
:2.0 V (CD mode, 1 kHz, 0 dB)  
:530 kHz – 1 710 kHz  
:27 dB/μV (22 μV, S/N 20 dB)  
Pre-amp output impedance :200 j  
USB Connector \CQ-RX400U\  
Above specifications comply with EIA standards.  
USB Standard Compatibility :1.1/2.0 Full Speed  
Maximum Supply Current :500 mA  
Front AUX input  
Power Output:  
18 W RMS x 4 Channels at 4 j and 1% THD+N  
Signal to Noise Ratio:  
Input impedance  
:10 kj  
Allowable external input :2.0 V  
Connector  
:3.5 mm œ Stereo mini-pin  
85 dBA (reference: 1 W into 4 j)  
Dimensions (W x H x D)  
:178 x 50 x 160 mm  
{7\ x 1 15/16\ x 6 5/16\}  
:1.2 kg {2 lbs. 10 oz}  
Weight  
Notes:  
• Specifications and design are subject to modification without  
notice due to improvements.  
• Some figures and illustrations in this manual may be different  
from your product.  
Disc Player  
Sampling frequency  
DA converter  
:8 times oversampling  
:1 bit DAC System  
:Astigma 3-beam  
:Semiconductor laser  
:790 nm  
Pick-up type  
Light source  
Wave length  
Frequency response  
Signal to noise ratio  
Total harmonic distortion  
Wow and flutter  
Channel separation  
:20 Hz – 20 kHz ( 1 dB)  
:96 dB  
:0.01 % (1 kHz)  
:Below measurable limits  
:85 dB  
Panasonic Consumer  
Electronics Company,  
Division of Panasonic  
Corporation of North America  
One Panasonic Way, Secaucus,  
New Jersey 07094  
Panasonic Sales Company,  
Division of Panasonic Puerto  
Rico, Inc. (“PSC”)  
Ave. 65 de Infanteria, Km. 9.5  
San Gabriel Industrial Park,  
Carolina, Puerto Rico 00985  
Panasonic Canada Inc.  
5770 Ambler Drive,  
Mississauga, Ontario  
L4W 2T3  
© 2007 Matsushita Electric Industrial Co., Ltd. All Right Reserved.  
YGFM286048A FT1007-2117 Printed in China  
- 7 -  
RDo not install the product where it is exposed to strong  
vibrations or is unstable.  
Avoid slanted or strongly curved surfaces for installation. If the  
installation is not stable, the unit may fall down while driving and  
this can lead to an accident or injury.  
RInstallation Angle  
The product should be installed in a horizontal position with the  
front end up at a convenient angle, but not more than 30˚.  
The user should bear in mind that in some areas there may be  
restrictions on how and where this unit must be installed. Consult  
your dealer for further details.  
RWear gloves for safety. Make sure that wiring is  
completed before installation.  
Caution  
Observe the following cautions when using this  
unit.  
RKeep the sound volume at an appropriate level.  
Keep the volume level low enough to be aware of road and traffic  
conditions while driving.  
RThis unit is designed for use exclusively in automobiles.  
RDo not operate the unit for a prolonged period with the  
engine turned off.  
Operating the audio system for a long period of time with the  
engine turned off will drain the battery.  
RTo prevent damage to the unit, do not connect the power  
connector until the whole wiring is completed.  
RDo not connect more than one speaker to one set of  
speaker leads. (except for connecting to a tweeter)  
RDo not expose the unit to direct sunlight or excessive  
heat.  
Otherwise these will raise the interior temperature of the unit, and  
it may lead to smoke, fire, or other damage to the unit.  
RDo not use the product where it is exposed to water,  
moisture, or dust.  
Exposure of the unit to water, moisture, or dust may lead to  
smoke, fire, or other damage to the unit. Make especially sure that  
the unit does not get wet in car washes or on rainy days.  
RSet the volume level to low enough before the AUX  
connection is completed.  
Failure to observe this, the loud noise may come out and damage  
your speakers and your hearing. Direct connection of the speaker/  
headphone output of an external device without any attenuator  
may distort sound or damage the connected external device.  
Observe the following cautions when handling the  
battery for the remote control unit.  
• Use only specified battery (CR2025).  
• Match the polarity of the battery with the (+) and (–) marks in the  
battery case.  
• Replace a dead battery as soon as possible.  
• Remove the battery from the remote control unit when not using it  
for an extended period of time.  
• Insulate the battery (by placing them in a plastic bag or covering  
them with vinyl tape) before disposal or storage.  
• Dispose of the battery according to the local regulations.  
• Do not disassemble, recharge, heat or short the battery. Do not  
throw a battery into a fire or water.  
Observe the following cautions when installing.  
R
Refer wiring and installation to qualified service personnel.  
Installation of this unit requires special skills and experience. For  
maximum safety, have it installed by your dealer. Panasonic is not liable  
for any problems resulting from your own installation of the unit.  
In case of battery leakage  
• Thoroughly wipe the battery liquid off the battery case and insert  
new battery.  
• If any part of your body or clothing comes into contact with battery  
liquid, wash it with plenty of water.  
• If battery liquid comes into contact with your eyes, wash them with  
plenty of water and get immediate medical attention.  
RFollow the instructions to install and wire the product.  
Not following the instructions to properly install and wire the  
product could cause an accident or fire.  
RTake care not to damage the leads.  
When wiring, take care not to damage the leads. Prevent them  
from getting caught in the vehicle chassis, screws, and moving  
parts such as seat rails. Do not scratch, pull, bend or twist the  
leads. Do not run them near heat sources or place heavy objects  
on them. If leads must be run over sharp metal edges, protect the  
leads by winding them with vinyl tape or similar protection.  
RUse the designated parts and tools for installation.  
Use the supplied or designated parts and appropriate tools to  
install the product. The use of parts other than those supplied  
or designated may result in internal damage to the unit. Faulty  
installation may lead to an accident, a malfunction or fire.  
Observe the following cautions when using USB  
device. \CQ-RX400U\  
• Do not connect a USB device directly to this unit. If the USB device  
is connected directly to this unit and an accident occurs, or if the  
brakes are applied suddenly, the driver or passenger may bump  
into the USB device and may get injured.  
• Position the USB device and USB extension cable so that they do  
not obstruct your driving.  
• Do not connect any USB device other than USB memory, a USB  
audio player or iPod series. Do not connect multiple USB devices  
to the USB connector. Drawing power for multiple USB devices  
from the connector could cause overheating and smoking.  
R
Do not block the air vent or the cooling plate of the unit.  
Blocking these parts will cause the interior of the unit to overheat  
and will result in fire or other damage.  
The following applies only in the U.S.A.  
Caution  
Part 15 of the FCC Rules  
THIS PRODUCT IS A CLASS I LASER PRODUCT.  
FCC Warning:  
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY  
RESULT IN HAZARDOUS RADIATION EXPOSURE.  
Any unauthorized changes or modifications to this equipment would  
void the user’s authority to operate this device.  
DO NOT OPEN COVERS AND DO NOT REPAIR BY YOURSELF.  
REFER SERVICING TO QUALIFIED PERSONNEL.  
Notice  
This product contains a CR Coin Cell Lithium Battery which contains  
Perchlorate Material - special handling may apply.  
- 8 -  
Notes on Discs  
If you use commercial CDs, they must have either of these labels shown at  
right.  
Some copy-protected music CDs are not playable.  
How to hold the disc  
Disc Insert  
• Do not touch the underside of the disc.  
• Do not scratch on the disc.  
The surfaces of new discs tend to be slippery. Therefore,  
when using such a disc for the first time, it may not load  
satisfactorily even when it has been inserted into the unit. At  
a time like this, insert the disc into the unit as far as it will go  
until it is loaded properly.  
• Do not bend the disc.  
• When not in use, keep disc in the case.  
Printed side  
• When inserting a disc into or ejecting and removing it  
from the unit, insert it straight in or eject and remove it  
straight out in parallel with the unit.  
Observe, the disc may be scratched or marked in the  
process.  
• When inserting a disc, do not put one disc on another.  
Failure to observe this may cause the discs to be jammed.  
Do not use discs that fit any of the descriptions given below.  
Using these discs may damage the discs or cause the unit to  
malfunction.  
Special discs in a shape which is not round  
Do not leave discs in the following places:  
• Direct sunlight  
• Near car heaters  
• Dirty, dusty and damp areas  
• On seats and dashboards  
Partly or wholly transparent disc  
Disc cleaning  
• Use a dry, soft cloth to wipe from the center outward.  
Wholly transparent disc  
Partly transparent disc  
Wholly semi-transparent disc may not be played back.  
<Correct>  
<Wrong>  
Discs with adhered labels, etc. on them  
• Do not attach any seals or labels to your discs.  
• Do not write on the disc label in a heavy pen or ballpoint  
pen.  
Disc with adhered stickers Labels created by a printer  
or tape  
Notes on CD-Rs/RWs  
• You may have trouble playing back some CD-R/RW discs  
recorded using CD recorders (CD-R/RW drives), either  
due to their recording characteristics or dirt, fingerprints,  
scratches, etc. on the disc surface.  
• CD-R/RW discs are less resistant to high temperatures and  
high humidity than ordinary music CD. Leaving them inside  
a car for extended periods may damage and make playback  
impossible.  
Protective films or sheets  
Discs accessories (stabilizers,  
etc.)  
Damaged or deformed discs  
• The unit may not successfully playback a CD-R/RW, that was  
made by the combination of writing software, a CD recorder  
(CD-R/RW drive) and a disc if they are incompatible with one  
another.  
• This player cannot play the CD-R/RW discs if the session is  
not closed.  
Shoddily made discs  
Discs with cracks, scratches or  
parts missing  
• Be sure to observe the handling instructions of CD-R/RW  
discs.  
• This player cannot play CD-R/RW discs which contain other  
than CD-DA or MP3/WMA/AAC data (Video CD, etc.).  
Discs with burrs  
Please remove the burrs  
before use.  
- 9 -  
Notes on MP3/WMA/AAC  
• The file extension for files encoded with the iTunes Apple  
Lossless Encoder is “.m4a”, but such files cannot be played  
on this player.  
Playable Audio File  
CQ-RX400U  
CQ-RX200U  
CQ-RX100U  
CQ-RX100L  
MP3/WMA/AAC  
MP3/WMA  
MP3/WMA  
• Files under copyright protection cannot be played.  
MP3/WMA  
Caution  
Notes for AAC playback is only for the model CQ-RX400U.  
Never assign the “.mp3”, “.wma” or “.m4a” file  
name extension to a file that is not in the MP3/  
WMA/AAC format.This may not only produce  
noise from the speaker damage, but also damage  
your hearing.  
What is MP3/WMA/AAC?  
MP3* (MPEG Audio Layer-3) and WMA (Windows MediaTM  
Audio) are the compression formats of digital audio. The former  
is developed by MPEG (Motion Picture Experts Group), and  
the latter is developed by Microsoft Corporation. Using these  
compression formats, you can record the contents of about  
10 music CDs on a single CD media (This figures refer to data  
recorded on a 650 MB CD-R or CD-RW at a fixed bit rate of  
128 kbps and a sampling frequency of 44.1 kHz).  
iTunes is a trademark of Apple Inc., registered in the U.S.  
and other countries/regions.  
Windows Media, and the  
Windows logo are trademarks, or  
registered trademarks of Microsoft  
Corporation in the United States  
and/or other countries/regions.  
*MPEG Layer-3 audio coding technology licensed from  
Fraunhofer.  
AAC is an abbreviation for “Advanced Audio Coding”.  
It has been defined as a standard for audio compression  
technology using MPEG 2 and MPEG 4.  
Note: MP3/WMA/AAC encoding and writing software is not  
supplied with this unit.  
Points to Remember When Making MP3/  
WMA/AAC Files  
Common  
• High bit rate and high sampling frequency are recommended  
for high quality sounds.  
• Selecting VBR (Variable Bit Rate) is not recommended  
because playing time is not displayed properly and sound  
may be skipped.  
• The playback sound quality differs depending on the  
encoding circumstances. For details, refer to the instructions  
of your own encoding software and writing software.  
MP3  
• It is recommended to set the bit rate to “128 kbps or more”  
and “fixed”.  
WMA  
• It is recommended to set the bit rate to “64 kbps or more”  
and “fixed”.  
• Do not set the copy protect attribute on the WMA file to  
enable this unit to play back.  
AAC  
• It is recommended to set the bit rate to “128 kbps or more”  
and “fixed”.  
• The formats and extensions for AAC data vary according to  
the encoder software used.  
• AAC files which can be played on this unit have the “.m4a”  
extension and were encoded with Apple iTunes® version 7.  
- 10 -  
Display Information  
Displayed items  
Recording MP3/WMA/AAC Files on a CD-  
Media/USB-Device  
You are recommended to minimize the chances of making  
a disc that contains both CD-DA files and MP3/WMA/AAC  
files.  
If CD-DA files are on the same disc as MP3, WMA or AAC  
files or the songs may not play in the intended order, or  
some songs may not play at all.  
CD-TEXT  
Disc title  
MP3 (ID3 tag)  
Album name  
Track title  
Title name/artist name  
WMA (WMA tag)  
Album name  
MP3/WMA/AAC  
Folder name  
File name  
Title name/artist name  
AAC (Song information)  
Album name  
Title name/artist name  
When storing MP3 data, WMA data or AAC data on the  
same disc, use different folders for each data.  
• Do not record files other than MP3/WMA/AAC files and  
unnecessary folder on a disc.  
• The name of an MP3/WMA/AAC file should be added by  
rules as shown in the following descriptions and also comply  
with the rules of each file system.  
Displayable characters  
• Displayable length of file name/folder name: within  
32 characters. (Unicoded file and folder names are reduced  
by half in the number of displayable characters.)  
• Name files and folders in accordance with the standard of  
each file system. Refer to the instructions of writing software  
for details.  
• The file extension “.mp3”, “.wma” or “.m4a” should be  
assigned to each file depending on the file format.  
You may encounter trouble in playing MP3/WMA/AAC files or  
displaying the information of MP3/WMA/AAC files recorded  
with certain writing software or CD recorders.  
• ASCII character set and special characters in each language  
can be displayed.  
• Some Cyrillic characters in the Unicode can be displayed.  
• This unit does not have a play list function.  
• Although Multi-session recording is supported, the use of  
Disc-at-Once is recommended.  
ASCII character set  
Supported file systems  
A to Z, a to z, digits 0 to 9, and the following symbols:  
(space) ! ” # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ˆ _ ` { | } ~  
QCD-media  
ISO 9660 Level 1/Level 2, Apple Extension to ISO 9660, Joliet,  
Special Characters  
À Á Â Ã Å à á â ã å  
Ä ä  
Ò Ó Ô Õ Ö ò ó ô õ ö  
Ù Ú Û Ü ù ú û ü  
Romeo  
Note: Apple HFS, UDF 1.50, Mix CD and CD Extra are not  
supported.  
QUSB-device \CQ-RX400U\  
File system is FAT12/16/32  
Notes:  
• With some software in which MP3/WMA/AAC format files  
have been encoded, the character information may not be  
displayed properly.  
• Undisplayable characters and symbols will be converted into  
an asterisk ( ).  
• It is recommended that the length of the file name is less  
than 8 characters (excluding the file extension).  
Compression formats  
(Recommendation: “Points to Remember When Making MP3/WMA/AAC Files” «Left)  
\CQ-RX400U\  
Compression method  
Bit rate  
VBR  
Yes  
Yes  
Yes  
Yes  
Yes  
Sampling frequency  
32, 44.1, 48 kHz  
16, 22.05, 24 kHz  
8, 11.025, 12 kHz  
32, 44.1, 48 kHz  
MPEG 1 Audio Layer-3 (MP3)  
MPEG 2 Audio Layer-3 (MP3)  
MPEG 2.5 Audio Layer-3 (MP3)  
Windows Media Audio Ver. 2 – 9*  
32 k – 320 kbps  
8 k – 160 kbps  
8 k – 160 kbps  
64 k – 160 kbps  
16 k – 320 kbps  
MPEG 4 Advanced Audio Coding Low  
Complexity (AAC LC)  
8, 11.025, 12, 16, 22.05, 24, 32, 44.1,  
48 kHz  
* WMA 9 Professional/LossLess/Voice are not supported.  
- 11 -  
\CQ-RX200U\ \CQ-RX100U\ \CQ-RX100L\  
Compression method  
Bit rate  
VBR  
Yes  
Yes  
Yes  
Yes  
Sampling frequency  
32, 44.1, 48 kHz  
16, 22.05, 24 kHz  
8, 11.025, 12 kHz  
32, 44.1, 48 kHz  
MPEG 1 Audio Layer-3 (MP3)  
MPEG 2 Audio Layer-3 (MP3)  
MPEG 2.5 Audio Layer-3 (MP3)  
Windows Media Audio Ver. 2 – 9*  
32 k – 320 kbps  
8 k – 160 kbps  
8 k – 160 kbps  
64 k – 160 kbps  
* WMA 9 Professional/LossLess/Voice are not supported.  
Folder Selection Order/File Playback Order  
Maximum number of files/folders  
• Maximum depth of trees: 8  
\CQ-RX400U\  
QCD-media  
Root folder  
(Root Directory)  
1
• Maximum number of files  
Folder Selection  
2
CD-media: 999  
USB device: 65 535  
• Maximum number of files in one folder  
CD-media: 999  
In the order  
1
8
4
File Selection  
In the order  
3
USB device: 999  
5
6
• Maximum number of folders:  
CD-media: 256 (Root folder is included.)  
USB device: 255 (Root folder is included.)  
\CQ-RX200U\ \CQ-RX100U\ \CQ-RX100L\  
• Maximum number of files: 999  
• Maximum number of files in one folder: 999  
• Maximum number of folders: 256 (Root folder is included.)  
8
7
Tree 1 Tree 2 Tree 3 Tree 4  
Tree 8 (Max.)  
Notes:  
QUSB-device \CQ-RX400U\  
• You can shorten the duration between data read and  
playback by decreasing the quantity of files or folders, or  
the depth of the hierarchy.  
• This unit counts the number of folders irrespective of the  
presence or absence of an MP3/WMA/AAC file.  
• If the selected folder does not contain any MP3/WMA/AAC  
files, the nearest MP3/WMA/AAC files in the order of  
playback will be played.  
Root folder  
(Root Directory)  
1
Folder Selection  
In the order  
1
5
2
4
File Selection  
In the order  
3
• Playback order may be different from other MP3/WMA/AAC  
players even if the same disc is used.  
• “ROOT” appears when displaying the root folder name.  
\CQ-RX400U\  
5
• Empty folders stored on the USB memory are not included  
in the folder count.  
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5  
Tree 8 (Max.)  
• Depending on the connected USB memory, the order in  
which the files are played back may differ to the order in  
which the files were stored.  
Copyright  
No warranty  
It is prohibited by copyright laws to copy, distribute and  
deliver copyrighted materials such as music without the  
approval of copyright holder except enjoying yourself  
personally.  
Above description complies with our investigations as of  
September 2007. It has no warranty for reproducibility and  
displayability of MP3/WMA/AAC.  
- 12 -  
Preparation  
Set your car’s ignition switch  
Press [SRC] (PWR: Power).  
C
O
C
A
1to the ACC or ON position.  
2
N
\CQ-RX400U\ \CQ-RX200U\  
The demonstration message appears for initial  
use.  
Press [VOL] (PUSH SEL: Select) to  
4select DEMO.  
Turn [VOL] counterclockwise.  
Set your car’s ignition switch to the ACC or  
5For using the remote control, press [0] ().  
1ON position.  
\CQ-RX400U\  
\CQ-RX200U\  
Notes:  
Press [SRC] (PWR: Power).  
• To return to the regular mode, press [DISP].  
• Refer to the section on “Function Settings”.  
• When “NO USB” (\CQ-RX400U\) or “NO DISC” is displayed,  
the Demonstration cannot be cancelled.  
2
Hold down [VOL] (PUSH SEL: Select) for  
32 sec. or more to open the function menu.  
Pull the insulation film out from  
the backside of the remote control  
gently.  
Note: Battery Information:  
Battery Type: Panasonic lithium battery (CR2025) (Included  
in the remote control)  
Battery Life: Approximately 6 months under normal use (at  
room temperature)  
The 12-hour system is used for the clock.  
Adjust the minute.  
5
Press [DISP].  
1
Minute entered  
(clock display)  
Hold down [DISP] for more than  
[]: sets the minute ahead.  
[]: sets the minute back.  
22 seconds.  
Hour blinks  
Press [DISP].  
6
Completed  
Adjust the hour.  
3
Notes:  
Hour entered  
• “ADJUST” is displayed before adjusting the clock.  
• Hold down [] or [] to change numbers rapidly.  
• When “NO DISC” is displayed, the clock cannot be  
adjusted.  
[]: sets the hour ahead.  
[]: sets the hour back.  
Press [DISP].  
Clock Display at Power Off  
4
Press [DISP] to change the display.  
Minute blinks  
Display off  
Clock display (Default)  
- 13 -  
General  
[SRC] (Source)  
selects a source.  
[PWR] (Power)  
toggles power on/off.  
Remote Control Sensor  
[VOL] (Volume)  
[SQ] (Sound Quality)  
AUX1 Connector (3.5 mm  
œ
stereo)  
selects a sound type (SQ).  
From line output of external sound/audio device (ex. Silicon-  
audio player, HDD player, etc.)  
Caution  
Set the volume level to low enough before the AUX  
connection is completed.  
Failure to observe this, the loud noise may come out and  
damage your speakers and your hearing.  
Power On/Off  
Volume Adjustment  
Set your car’s ignition switch to the ACC or ON position.  
Power on: Press [SRC] (PWR).  
Power off: Hold down [SRC] (PWR) for more  
than 1 second.  
(Setting Range: 0 to 40, Default: 18)  
Turn [VOL].  
Source Selection  
Press [SRC] to change the source.  
\CQ-RX400U\  
QUSB Connector  
\CQ-RX400U\  
When an optional USB memory is connected:  
When loading MP3/WMA/AAC data  
Radio  
Disc Player  
When an optional USB memory is not connected:  
System-up  
Connector  
AUX 1*  
USB Connector  
(«Below)  
(«Right)  
Note: Select USB Connector mode to operate the iPod  
series connected with USB connector. (« System Upgrade  
Guidebook)  
(«Continued below)  
- 14 -  
Radio (AM/FM)  
[SRC] (Source)  
[TUNE ] [TUNE ]  
selects a source.  
down/up the frequency. (Hold it down for more than 0.5 seconds  
and release it for seek tuning.)  
[DISP] (Display)  
switches the information on the  
display.  
[BAND]  
selects a band in the radio source.  
[APM] (Auto Preset Memory)  
executes APM in the radio source. (Hold it  
down for more than 2 seconds.)  
Preset buttons [1] to [6]  
selects a preset station in the radio source,  
and presets the current station. (Hold it down for more than  
2 seconds.)  
Press [SRC] to select the radio source.  
Frequency Adjustment  
1
2
[TUNE ]: Lower  
[TUNE ]: Higher  
Press [BAND] to select a band.  
Note: Hold down for 0.5 sec. or more and release for  
station search.  
Preset Station Selection  
Press the corresponding preset button from  
[1] to [6] to tune in a preset station.  
Select a station.  
3
Display Change  
Band  
Frequency  
Preset Number  
Press [DISP] to change the display.  
Radio mode display  
(Default)  
Clock display  
lights while receiving an FM stereo signal.  
Up to 6 stations can be preset in AM, FM1, FM2, and FM3 respectively.  
Preset stations can be simply called up by pressing [1] to [6].  
Auto Preset Memory (APM)  
Manual Station Preset  
With this operation, stations with good receiving conditions  
can be automatically stored in the preset memory.  
Tune into a station.  
1
Hold down one of the preset buttons from  
Select a band.  
2[1] to [6] for more than 2 seconds.  
1
Hold down [BAND] (APM) for more than  
22 seconds.  
(blinks once)  
The preset stations under best receiving conditions are received  
for 5 seconds each after presetting the stations (SCAN). To stop  
scanning, press one of the buttons from [1] to [6].  
Note: New stations overwrite existing saved stations.  
Note: New stations overwrite existing saved stations.  
- 15 -  
Audio Settings  
[VOL]  
selects a value in the audio menu.  
(PUSH SEL) (Push to select)  
selects items in the audio menu.  
[DISP] (Display)  
exits from the audio menu.  
Press [VOL] (PUSH SEL) to open the audio menu.  
1Note: If no operation takes place for more than 5 seconds in audio setting (2 seconds in the volume adjustment,  
10 seconds in the SQ adjustment), the display returns to the regular mode.  
Press [VOL] (PUSH SEL) to select a  
Turn [VOL] clockwise or counterclockwise to  
2mode to be adjusted.  
3adjust.  
Volume  
(Setting Range: 0 to 40, Default: 18)  
: Up  
: Down  
Bass  
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)  
: Increased  
: Decreased  
Treble  
(Setting Range: –12 dB to +12 dB by 2 dB, Default: 0 dB)  
: Increased  
: Decreased  
SQ Adjustment  
/: center frequency up/down  
[] []: Band selection  
[] []: Level up/down  
(Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB))  
Setting range:  
SQ Low/Bass:  
SQ Mid:  
12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)  
12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)  
SQ High/Treble: 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)  
Balance  
(Setting Range: 15 levels each, Default: CNT (center))  
: Right enhanced  
: Left enhanced  
Fader  
(Setting Range: 15 levels each, Default: CNT (center))  
: Front enhanced  
: Rear enhanced  
Notes:  
• The volume can also be adjusted directly using [VOL] on the main unit. (« “General”)  
• For further information on SQ (Sound Quality) settings, refer to “Sound Control”.  
• Do not activate SQ and Bass/Treble at the same time to avoid causing sound distortion.  
\CQ-RX400U\ \CQ-RX200U\  
• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information,  
refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.  
\CQ-RX200U\ \CQ-RX100U\ \CQ-RX100L\  
• If the fader is set to front, the pre-amp. output (rear) is decreased.  
- 16 -  
Function Settings  
[VOL]  
selects a value in the function menu.  
(PUSH SEL) (Push to select)  
selects items in the function menu.  
[DISP] (Display)  
exits from the function menu.  
Hold down [VOL] (PUSH SEL) for 2 sec. or more to open the function menu.  
1Note: If no operation takes place for more than 5 seconds in function setting, the display returns to the regular mode.  
Press [VOL] (PUSH SEL) to select a mode to  
Turn [VOL] clockwise or counterclockwise to  
2be adjusted.  
3adjust.  
: On (Default)  
Demonstration  
\CQ-RX400U\ \CQ-RX200U\  
You can set up the monitor to display or hide the  
demonstration screen.  
: Off  
Note: Button operation with either the main unit or  
remote control allows users to cancel the demonstration  
screen for 20 seconds and enable the selected operation  
even in the demo-on mode.  
: Volume down  
by 10 steps  
Mute/Attenuation  
You can select mute or attenuation.  
: Volume off  
(Default)  
: On (Skip  
disabled.) (Default)  
\CQ-RX400U\ \CQ-RX200U\  
AUX1 Skip  
If AUX1 is not used, the AUX1 mode is skipped when  
selecting the source.  
: Off (Skip  
enabled.)  
: On (Skip  
disabled.) (Default)  
\CQ-RX100U\ \CQ-RX100L\  
AUX Skip  
If AUX is not used, the AUX mode is skipped when  
selecting the source.  
: Off (Skip  
enabled.)  
Notes:  
• To return to the regular mode, press [DISP].  
\CQ-RX400U\ \CQ-RX200U\  
• The sequence and contents of setting items may depend on the conditions of devices to be connected. For further information,  
refer to the System Upgrade Guidebook or the instruction manuals for the devices to be connected.  
- 17 -  
Sound Control  
You have 6 preset modes (FLAT, ROCK, POP, VOCAL, JAZZ,  
CLUB). You can customize your settings for these and save  
them for instant recall.  
(FLAT) flat frequency response:  
does not emphasize any part. (Default)  
SQ Changeover  
Press [SQ] to activate the SQ selection mode.  
Press [SQ] to select the sound type as follows.  
(ROCK) speedy and heavy sound:  
exaggerates bass and treble.  
Press [DISP] to return to the regular mode.  
(POP) wide-ranged and deep sound:  
slightly emphasizes bass and treble.  
Notes:  
• After pressing [SQ] on the main unit, you can also select a  
sound type by pressing the preset buttons [1] to [6].  
• Please refer to “Audio Settings” for the adjustment to each  
speaker.  
(VOCAL) clear sound:  
emphasizes middle tone and slightly emphasizes treble.  
(JAZZ) jazz-specific deep sound:  
sound with emphasis on sharpness of high-hat and echo  
saxophone.  
(CLUB) club and disco-specific sound:  
reproduction of realism being in a club.  
You can adjust the characteristics of the currently selected  
sound type (SQ). (« Above)  
It is also possible to preset up to 5 different adjusted SQs.  
Press [VOL] (PUSH SEL:  
Select) to open the audio  
1
menu.  
Press [VOL] (PUSH SEL: Select) to  
2
SQ3 (3-Band Sound Quality)  
select SQ SET.  
Center frequency and level are adjustable in each of 3 bands.  
This lets you fine-tune sound quality for each genre to suit  
car-interior acoustics and your personal preferences.  
Tone/SQ adjustable range: B12 dB to A12 dB (by 2 dB)  
Adjust each band.  
3
/: center frequency up/down  
[] []: Band selection  
[] []: Level up/down  
SQ Low/Bass:  
SQ Mid:  
12 dB (at 60 Hz, 80 Hz, 100 Hz, 200 Hz)  
12 dB (at 500 Hz, 1 kHz, 2 kHz, 3 kHz)  
Level  
SQ High/Treble: 12 dB (at 10 kHz, 12 kHz, 15 kHz, 18 kHz)  
Frequency  
• The bass/treble control level of each frequency is fixed to  
the frequency that has been selected for SQ.  
Hold down the numeric button [2] to [6]  
4
for 2 sec. or more.  
To return an adjusted SQ to the default setting  
Press [SQ], and select the SQ which is to be returned to  
the default setting. (Only for main unit)  
• The adjusted SQ is preset in the number of the selected  
button, and return to the regular mode resumes.  
• When you suspend the SQ preset adjustment, each level  
remains your recent adjustment until a new SQ presetting  
operation is performed or you call up the SQ preset.  
Hold down [BAND] for 2 sec. or more.  
Notes:  
• You cannot save any SQ presetting value in [1] button.  
• Any SQ adjustments will not change the call up screen  
names such as ROCK and JAZZ.  
• Do not activate SQ and Bass/Treble at the same time to  
avoid causing sound distortion.  
- 18 -  
Remote Control Unit  
Notes:  
• This instruction manual explains operations for use with the buttons on the main unit. (Different operations excluded)  
• Aim the remote control at the remote sensor and operate it.  
[BAND] (SET)  
[0] to [9]  
selects a band in the tuner source, toggles pause/play in player source,  
selects a preset station (1 to 6),  
executes the APM (Auto Preset Memory) in tuner source  
presets the current station (Hold it down for more than  
(Hold it down for more than 2 seconds).  
2 seconds.),  
inputs the number in direct selection.  
[#] (NUMBER)  
[MENU] (SEL: Select)  
selects the items in the audio menu.  
[SRC] (SOURCE)  
selects a source.  
(POWER)  
executes the direct selection.  
[RANDOM] [SCAN] [REPEAT]  
toggles on/off each play mode.  
[] []  
down/up the frequency (Hold it down for more than  
0.5 seconds and release it for seek tuning.)  
toggles power on/off.  
[VOL] (volume)  
adjusts the volume, and selects the  
value in the audio menu, etc.  
[MUTE]  
toggles mute on/off.  
(Only for remote control unit)  
Note: You can select mute or  
attenuation. (« “Function Settings”)  
[] []  
skip to the previous/next folder in player mode.  
[] []  
skip to the previous/next track/file in player mode. Hold  
it down for fast reverse/fast forward.  
[DISP] (Display)  
switches the information on display,  
and exits the audio menu.  
Direct Access  
A track (CD mode), file, folder (MP3/WMA/AAC mode) can  
be directly selected.  
Example: Track number 5  
Put a battery in the  
case with (+) side  
facing up.  
Press [#] (NUMBER).  
1
Put the case back.  
Press [5].  
2
Press [BAND] (SET).  
3
Notes:  
Warning  
• To suspend direct selection, press [DISP].  
• For folder selection, enter a number after pressing [#]  
(NUMBER) twice.  
Keep batteries and insulation film out of reach of infants.  
Batteries and insulation film can be ingested, so keep  
them out of the reach of infants. If an infant ingests a  
battery or insulation film, please seek immediate medical  
attention.  
Functions only on Main unit  
The following functions are not available on remote control  
unit.  
• SQ selection  
• Disc eject  
Caution  
• Scroll  
• Tag on/off  
• Remove and dispose of an old battery immediately.  
• Do not disassemble, heat or short a battery. Do not  
throw a battery into a fire or water.  
Battery Replacement  
• Follow local regulations when disposing of a battery.  
• Improper use of batteries may cause overheating, an  
explosion or ignition, resulting in injury or a fire.  
Tough pointed object  
Remove the battery holder with  
the remote control unit placed on  
a flat surface.  
Notice  
Stick your thumbnail into  
the groove, and push the  
holder in the direction of  
the arrow, and at the same  
time.  
This product contains a CR Coin Cell Lithium Battery  
which contains Perchlorate Material - special handling  
may apply.  
2
1
Pull it out in the direction  
of the arrow using a tough  
pointed object.  
Notes: Battery Information:  
Battery Type: Panasonic lithium battery (CR2025) (Included  
in the remote control)  
Back side  
Battery Life: Approximately 6 months under normal use (at  
room temperature)  
- 19 -  
\CQ-RX200U\  
Radio  
QSystem-up Connector  
\CQ-RX400U\ \CQ-RX200U\  
Disc Player  
When an optional device is connected:  
Shift to connected device  
When connecting CD changer  
System-up Connector  
(«Right)  
AUX 1*  
When connecting iPod  
\CQ-RX100U\ \CQ-RX100L\  
When connecting XM Receiver  
When connecting Sirius Receiver  
When connecting Bluetooth® Unit  
Radio  
Disc Player  
AUX*  
QAUX1 Connector  
AUX IN*:  
OR  
\CQ-RX400U\ \CQ-RX200U\  
When an expansion module is connected:  
The devices connected to the ports 1 to 4 are activated in  
sequence after shifting to AUX2 (device connected to the  
AUX terminal of the expansion module).  
\CQ-RX100U\ \CQ-RX100L\  
\CQ-RX400U\ \CQ-RX200U\  
Note: The connector is labeled “AUX1”, but it appears on the  
display as “<AUX IN>”.  
Note: For information about connectable devices, refer to  
the System Upgrade Guidebook or the instruction manual  
for each device.  
- 20 -  
Player (Disc Player)  
Notes:  
Playable Audio File  
• The power will be turned on automatically when a disc is loaded.  
• A disc which has both CD-DA data and MP3/WMA/AAC data on it  
may not be reproduced normally.  
CQ-RX400U  
CQ-RX200U  
CQ-RX100U  
CQ-RX100L  
MP3/WMA/AAC  
MP3/WMA  
MP3/WMA  
MP3/WMA  
Notes for AAC playback is only for the model CQ-RX400U.  
[] []  
skip to the previous/next folder.  
[] (Eject)  
ejects the disc.  
Disc slot  
takes a disc in with the  
printed side facing up.  
Printed side up  
[SRC] (Source)  
selects a source.  
[DISP] (Display)  
switches the information on the display.  
(ꢃꢄ) (Play/Pause)  
toggles pause/play in the player source.  
[4] (RANDOM)/[5] (SCAN)/[6] (REPEAT)  
toggles on/off each play mode.  
[3] (SCROLL)  
[] []  
skip to the previous/next track/file in  
the player mode.  
Hold down either of them for fast  
reverse/fast forward.  
scrolls the information on display.  
Notes:  
• If you insert an 8 cm {3S} disc and cannot eject it, turn ACC of your  
car off once and turn it on again, then press [] (Eject).  
• Do not insert foreign matter into the disc slot.  
Do not insert a disc when the  
Refer to the section of “Notes on Discs” and “Notes on MP3/WMA/  
AAC”.  
indicator lights.  
This unit does not support 8 cm {3\} discs.  
Press [SRC] to select the Disc Player  
Pause  
Press [BAND] (ꢃꢄ).  
1source.  
2
Select a desired portion.  
Press again to cancel.  
Track/File Selection  
Press [] / [].  
Note: To perform fast forward/reverse, hold down either of  
them.  
Disc Player (CD-DA disc):  
Previous/next track  
Disc Player (MP3/WMA/AAC disc):  
Previous/next file  
Folder Selection (MP3/WMA/AAC)  
Press [] / [].  
- 21 -  
CD-DA Mode Display  
Display Change  
Lights when the disc is loaded.  
Press [DISP] to change the display.  
Disc Player  
(CD-DA disc):  
Disc Player (MP3/WMA/AAC  
disc):  
Normal  
Disc title  
Track title  
Clock  
Normal  
Play time  
Track number  
Play time  
Play Mode indicators  
Folder name/  
Album*  
File name/  
Title, artist*  
MP3/WMA/AAC Mode Display  
Clock  
*ID3/WMA/AAC Tag On/Off  
Hold down [3] for more than  
2 seconds.  
File number  
Play Mode indicators  
Folder number  
Lights when folder random/repeat/scan is on.  
album title and song title/  
artist name are displayed.  
(Default)  
folder name/file name are  
displayed.  
Notes:  
• For scrolling text, press [3] (SCROLL).  
• “NO TEXT” is displayed when there is no information on the disc.  
Random Play  
All the available songs (tracks/files) are played in a random  
sequence.  
Press [4] (RANDOM).  
Press again to cancel.  
Folder Repeat Play (MP3/WMA/AAC)  
The current folder is repeated.  
Hold down [6] (REPEAT) for more than  
2 seconds.  
Hold down again to cancel.  
Folder Random Play (MP3/WMA/AAC)  
All the available files in current folder are played in a random  
sequence.  
Scan Play  
The first 10 seconds of each songs (tracks/files) is played in  
sequence.  
Hold down [4] (RANDOM) for more than  
2 seconds.  
Hold down again to cancel.  
Press [5] (SCAN).  
Press again to cancel.  
Folder Scan Play (MP3/WMA/AAC)  
From the next folder, the first 10 seconds of the first file in  
each folder is played in sequence.  
Repeat Play  
The current song (track/file) is repeated.  
Press [6] (REPEAT).  
Press again to cancel.  
Hold down [5] (SCAN) for more than  
2 seconds.  
Hold down again to cancel.  
- 22 -  
Troubleshooting  
If You Suspect Something Wrong  
Check and take steps as described below.  
Warning  
• Do not use the unit in an irregular condition, for example,  
without sound, or with smoke or a foul smell, which can cause  
ignition or electric shock. Immediately stop using the unit and  
consult your dealer.  
• Never try to repair the unit by yourself because it is dangerous  
to do so.  
If the described suggestions do not solve the problem, it is  
recommended to take the unit to your nearest authorized Panasonic  
Servicenter. The product should be serviced only by qualified  
personnel. Please refer the checking and the repair to professionals.  
Panasonic shall not be liable for any accidents arising out of neglect  
of checking the unit or your own repair after your checking.  
Never take measures especially those other than  
indicated by italic letters in “Possible Solution” described  
below because those are too dangerous for users to  
handle themselves.  
Trouble  
Possible Solution  
Trouble  
Possible Solution  
Common  
Radio  
Start the engine. (Or turn the ignition  
switch to the ACC position.)  
Tune in to another station of high-intensity  
waves.  
Make sure that the antenna mounted point  
is grounded properly.  
Frequent noise  
Verify the wiring. (battery lead, power  
lead, ground lead, etc.)  
Fuse blown (Contact the nearest Panasonic  
Servicenter.)  
No power  
The preset memory is cleared to return  
to the original factory setting when  
the power connector or battery is  
disconnected.  
Preset data  
deleted  
Ask a professional for fuse replacement.  
Be sure to use the same rated fuse.  
Disable the mute function.  
Verify the wiring.  
Wait until the dew disappears before  
Error Display Messages (Disc Player)  
No sound  
Noise  
(The disc is ejected automatically.)  
The disc is dirty or upside down.  
Check the disc.  
turning on the unit.  
Make sure that grounding is established  
properly.  
(The disc is ejected automatically.)  
The disc has scratches.  
Check the disc.  
Adjust the balance and fader.  
Verify the wiring.  
No sound from  
left, right, front,  
or rear speaker  
No operation by some cause.  
If normal operation is not restored,  
consult your dealer or the nearest  
Servicenter to ask for repairs.  
Connect the speaker lead correctly.  
Left and right  
sounds are  
reversed  
Cannot read the file  
Check the disc.  
Disc Player  
WMA/AAC file can be copyrighted.  
The file protected by copyright is not  
playable.  
Load the disc correctly.  
Clean the disc.  
No sound,  
or disc is  
automatically  
ejected  
\CQ-RX400U\ \CQ-RX200U\  
Note: Refer to the System Upgrade Guidebook for error messages  
regarding optional products.  
Clean the disc.  
Sound skip,  
poor sound  
quality  
The maximum permissible tilt angle is  
30°.  
Secure the unit.  
Sound skip due  
to vibration  
Press []. If the disc is still not ejected,  
contact the nearest Panasonic Servicenter.  
Disc not  
ejectable  
- 23 -  
Memorandum  
- 24 -  

Transcend Information TS1_2GUSD S3 User Manual
Sony Ericsson K220 User Manual
Sony CDX 3180 User Manual
Seagate ST9808211AB User Manual
Philips CD 210 User Manual
Philips AJ3712 User Manual
Panasonic CQ DP745 User Manual
Panasonic 2700 User Manual
Oregon Clock RRM320P User Manual
Nokia Cell Phone 7260 User Manual