|
TELUS
i335 Mike Phone
User’s Guide
HELLOMOTO
Introducing your new Mike i335 phone. Here’s a quick anatomy lesson.
Volume Keys
Left Soft Key
Right Soft Key
Perform function
Perform function
PTT Button
in lower left
On/Off/Home
Key
in lower right
display.
display.
Audio Jack
USB Connector
Menu Key
From home screen,
open main menu.
Speaker
beneath
keypad
Speaker Key
Power/Home/End Key
End calls, exit menu
system.
Talk Key
Make &
answer calls.
Microphone
beneath keypad
OK Key
4-Way
In menus & lists,
press to select
highlighted option.
Internal Antenna
located here
Navigation Key
1
check it out
Home Screen
Main Menu
Main Menu
q
0
P
T u
L
D
g
l
2
Customizable
that can be used
to open the
O
key
Press the Navigation Key
up, down, left or right (
to highlight a menu feature.
3
4
More
Exit
)
Settings screen
Press the
to select.
O
key
Press and hold the
1
Power Key
for a
few seconds, or until
the screen lights up,
to turn on your phone.
2
Motorola, Inc.
Certain Bluetooth features including those listed may not be
supported by all compatible Bluetooth-enabled devices, and/or the
functionality of such features may be limited in certain devices, or
by certain wireless carriers. Contact your wireless carrier about
feature availability and functionality.
Consumer Advocacy Office
1307 East Algonquin Road
Schaumburg, IL 60196
Caution: Changes or modifications made in the radio phone, not
expressly approved by Motorola, will void the user's authority to
operate the equipment.
1-800-331-6456 (United States)
1-888-390-6456 (TTY/TDD United States for hearing impaired)
1-800-461-4575 (Canada)
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are
the property of their respective owners. Java and all other Java-
based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
Product Support:
Certain mobile phone features are dependent on the capabilities
and settings of TELUS’s network. Additionally, certain features
may not be activated by TELUS, and/or TELUS's network settings
may limit the feature’s functionality. Always contact TELUS Client
Care about feature availability and functionality. All features,
functionality, and other product specifications, as well as the
information contained in this user's guide are based upon the
time of printing. Motorola reserves the right to change or modify
any information or specifications without notice or obligation.
© Motorola, Inc., 2007.
Manual Number: NNTN7351A
Software Version: D7F.00.37
CP Version: 6A.00.00
USR Version: U7FA.32.02
This device supports Bluetooth 1.2 and HS/HF/OPP/DUN/BPP
profiles. In order for Bluetooth devices to communicate with one
another, they must utilize the same Bluetooth profile. To determine
the profiles supported by other Motorola devices, visit
respective manufacturer.
3
contents
check it out . . . . . . . . . . . . . . . . . 2
menu map . . . . . . . . . . . . . . . . . . 6
Use and Care. . . . . . . . . . . . . . . . 8
essentials . . . . . . . . . . . . . . . . . . 9
about this guide . . . . . . . . . . . 9
SIM card . . . . . . . . . . . . . . . . 10
battery . . . . . . . . . . . . . . . . . . 10
turn it on & off . . . . . . . . . . . 14
make phone a call . . . . . . . . 15
answer phone a call . . . . . . 15
make a private call . . . . . . . 15
answer a private call . . . . . 17
store a phone number or
main attractions . . . . . . . . . . . 26
PTV features . . . . . . . . . . . . 26
one touch PTT. . . . . . . . . . . 31
PT manager . . . . . . . . . . . . . 32
Mike’s wireless
web services. . . . . . . . . . . . 32
bluetooth® . . . . . . . . . . . . . . 35
basics . . . . . . . . . . . . . . . . . . . . 39
display . . . . . . . . . . . . . . . . . 39
text entry . . . . . . . . . . . . . . . 40
volume . . . . . . . . . . . . . . . . . 43
navigation key. . . . . . . . . . . 43
handsfree speaker . . . . . . . 43
transmitters . . . . . . . . . . . . . 43
use GPS with
voice name . . . . . . . . . . . . . 48
caller ID. . . . . . . . . . . . . . . . 49
call forward . . . . . . . . . . . . 49
emergency calls . . . . . . . . 50
international calls . . . . . . . 50
speed dial . . . . . . . . . . . . . . 51
turbo dial . . . . . . . . . . . . . . . 51
voice mail . . . . . . . . . . . . . . 52
net alerts . . . . . . . . . . . . . . . 53
Mike’s Talk AroundTM . . . . 53
customize. . . . . . . . . . . . . . . . . 60
ring tones . . . . . . . . . . . . . . 60
wallpaper . . . . . . . . . . . . . . 61
backlight . . . . . . . . . . . . . . . 61
datebook . . . . . . . . . . . . . . . 62
hide or show location
private ID . . . . . . . . . . . . . . . 17
call a stored phone
number or private ID. . . . . . 18
your phone number
information . . . . . . . . . . . . . 62
other features . . . . . . . . . . . . . 64
advanced calling . . . . . . . . 64
contacts . . . . . . . . . . . . . . . 65
datebook . . . . . . . . . . . . . . . 65
map software . . . . . . . . . . . 44
calls. . . . . . . . . . . . . . . . . . . . . . 47
recent calls . . . . . . . . . . . . . 47
redial. . . . . . . . . . . . . . . . . . . 48
and Private ID . . . . . . . . . . . 19
text messages . . . . . . . . . . . 19
using your handset
as a modem . . . . . . . . . . . . . 23
contents
4
GPS . . . . . . . . . . . . . . . . . . . . 66
handsfree . . . . . . . . . . . . . . . 67
personalize . . . . . . . . . . . . . . 68
pc applications . . . . . . . . . . 68
TTY . . . . . . . . . . . . . . . . . . . . . 68
security . . . . . . . . . . . . . . . . . 69
Safety and General
Information . . . . . . . . . . . . . . . . 72
Service & Repairs . . . . . . . . . . 77
Specific Absorption
Rate Data . . . . . . . . . . . . . . . . . . 78
Motorola Limited Warranty
for the United States and
Canada . . . . . . . . . . . . . . . . . . . . 80
Hearing Aid Compatibility . . . 85
Information From the
World Health Organization . . 87
Patent and Trademark
Information . . . . . . . . . . . . . . . . 89
Privacy and Data Security . . . 90
Smart Practices
While Driving . . . . . . . . . . . . . . 91
Index. . . . . . . . . . . . . . . . . . . . . . 93
contents
5
menu map
main menu
M
Call Timers
K
Shortcuts
1
L
E
Browser
•
•
•
•
•
•
•
•
•
•
[New Entry]
1)Shortcuts
B
o
Recent Calls
Profiles
Java Apps.
Messages
2)Cntcs[New Contact]
3)Recent Calls
4)Contacts
•
•
•
•
•
•
[Create Message]
Voice Mail
Inbox
5)Datebook
J
My Info
6)Messages
•
•
•
•
•
•
•
•
•
My Name
Drafts
Sent Items
Net Alert
7)VoiceRecord
8)Browser
Line 1
Line 2
9)Call Forward
Private ID
Group ID:
Carrier IP
IP1 Address
IP2 Address
Circuit Data
Q
A
Shop
l
Memo
Contacts
L
N
Talk Around
PT Manager
•
[New Contact]
p
t
Call Alert
D
0
P
Datebook
VoiceRecord
Call Forward
GPS
•
•
•
•
•
Send Picture
Ring Tones
Send Event
Send My Info
Send Contact
Configure
•
•
•
•
Vibrate All: On/Off
Ringer
Vibrate
Silent
c
O
C
My Pictures
u
Settings
(see next page)
•
•
•
Position
Bluetooth
Privacy
•
•
•
•
•
Hands Free
Interface
Link to Devices
Device History
Setup
•
This is th•e sFtainnddMared Main Menu layout.
Your phone’s menu may be a little
different.
menu map
6
settings menu
Display/Info
2-Way Radio
Security
•
•
•
•
•
•
•
•
•
Wallpaper
Text Size
Theme
•
•
•
•
•
•
Tkgrp Silent
•
•
•
•
•
Phone Lock
Tkgrp Area
Keypad Lock
SIM PIN
One Touch PTT
Alert Type
Home Icons
Backlight
Clock
GPS PIN
On/Off PTT
Store Rcvd Info
Change Passwds
Advanced
Menu View
Large Dialing
Language
Personalize
•
•
•
•
•
•
•
•
Alert Timeout
•
•
•
•
•
•
•
•
•
Menu Options
Headset/Spkr
Connectivity
Reset Defaults
Return to Home
Transmitters
Phone Only
Up Key
Phone Calls
Down Key
Left Key
Right Key
Center Key
Left Sftkey
Right Sftkey
Power Up
•
•
•
•
•
•
•
•
•
•
•
Set Line
Any Key Ans
Auto Redial
Call Waiting
Auto Ans
Baud Rate
Minute Beep
Call Duration
TTY
Notifications
DTMF Dialing
Prepend
Volume
•
•
•
•
•
•
•
•
•
Line 1
Line 2
Messages
Earpiece
Speaker
Keypad
Java Earpiece
Java Spkr
Data
menu map
7
Use and Care
Use and Care
To care for your Mike phone, please keep it away from:
liquids of any kind
dust and dirt
Don’t expose your phone to
water, rain, extreme humidity,
sweat, or other moisture.
Don’t expose your phone to dust,
dirt, sand, food, or other
inappropriate materials.
extreme heat or cold
cleaning solutions
Avoid temperatures below
-10°C/14°F or
above 45°C/113°F.
To clean your phone, use only a dry
soft cloth. Don’t use alcohol or
other cleaning solutions.
microwaves
the ground
Don’t try to dry your phone in a
microwave oven.
Don’t drop your phone.
Use and Care
8
essentials
Caution: Before using the phone for the first
time, read the Important Safety and Legal
information included in the gray edged pages
at the back of this guide.
3
Press the center key
O
to select it.
symbols
This means a feature is network/
subscription dependent and may
not be available in all areas. Contact
TELUS for more information.
about this guide
This guide shows how to locate a menu
feature as follows:
This means a feature requires an
optional accessory.
Find it:
M
>
Settings.
This means that, from the home screen:
1
2
Press the menu button
M
to open the
to scroll to
Main Menu
.
Press the navigation key
Settings.
essentials
9
Warning: To avoid loss or damage, do not
remove your SIM chip from your phone
unless absolutely necessary.
SIM card
insert the SIM card
Turn off your phone and remove your battery
before you install or remove a SIM card.
battery
Carefully slide the SIM chip into your phone,
until it lies flat in the SIM chip holder.
Battery Use & Battery Safety
•
Motorola recommends you always
use Motorola-branded batteries and
chargers. The warranty does not cover
damage caused by non-Motorola
batteries and/or chargers. Caution: Use
of an unqualified battery or charger
may present a risk of fire, explosion,
leakage, or other hazard. Improper
battery use, or use of a damaged
battery, may result in a fire, explosion,
or other hazard.
•
Battery usage by children should be
supervised.
essentials
10
•
Important: Motorola mobile devices are
designed to work best with qualified
batteries. If you see a message on your
display such as Invalid Battery or Unable to
Charge, take the following steps:
room temperature. Never expose
batteries to temperatures below 0°C
(32°F) or above 45°C (113°F) when
charging. Always take your mobile
device with you when you leave your
vehicle
•
Remove the battery and inspect it
to confirm that it bears a Motorola
“Original Equipment” hologram;
•
•
When storing your battery, keep it in a
cool, dry place.
•
•
•
If there is no hologram, the battery
is not a qualified battery;
It is normal over time for battery life to
decrease, and for the battery to exhibit
shorter runtime between charges or
require more frequent or longer
charging times.
If there is a hologram, replace the
battery and retry charging it;
If the message remains, contact a
Motorola Authorized Service
Center.
•
Avoid damage to battery and mobile
device. Do not disassemble, open,
crush, bend, deform, puncture, shred,
or submerge the battery or mobile
device. Avoid dropping the battery or
mobile device, especially on a hard
surface. If your battery or mobile
device has been subjected to such
•
•
New batteries or batteries stored for a
long time may take more time to
charge.
Charging precautions: When
charging your battery, keep it near
essentials
11
damage, take it to a Motorola
battery installation
Authorized Service Center before
using. Do not attempt to dry it with an
appliance or heat source, such as a hair
dryer or microwave oven.
1
Slide the release button back until it
releases the battery door.
•
Use care when handling a charged
battery: Particularly when placing it
inside a pocket, purse, or other
container with metal objects. Contact
with metal objects (e.g., jewelry, keys,
beaded chains) could complete an
electrical circuit (short circuit), causing
the battery to become very hot, which
could cause damage or injury.
2
3
Remove battery door.
Promptly dispose of used batteries in
accordance with local regulations.
Contact your local recycling center for
proper battery disposal.
Insert battery as shown below. Push
the battery down until it snaps in place.
Warning: Never dispose of batteries in a
fire because they may explode.
essentials
12
2
Plug the other end of the charger into the
appropriate electrical outlet.
4
Replace the battery door.
When you charge the battery, the battery
level indicator at the upper right of the screen
shows charging progress. At least one
segment of the indicator must be visible to
ensure full phone functionality while charging.
battery charging
New batteries are not fully charged.
charge from your computer
You can partially charge your phone’s
battery by connecting a Motorola-approved
USB cable from your phone’s mini-USB port
to a high power USB connector on a
computer (not a low-power one, such as the
USB connector on your keyboard or bus-
powered USB hub). Typically, USB high-
power connectors are located directly on your
computer.
charge using the charger
1
Pull out the connector cover, and insert
the charger into the accessory connector
on your phone as shown.
Note: The phone will be charged at a slower
rate than it is charged with the rapid charger.
essentials
13
Your computer must be turned on, and you
must have correct software drivers installed
on your computer. If the Phone is off when
the USB cable is connected between the
computer and the phone, the phone will
power up in charging mode. This mode allows
the phone to charge fastest and quickest.
software drivers are available in Motorola
Original data kits, sold separately.
TM
Tip: Motorola batteries have circuitry that
protects the battery from damage from
overcharging. Of course, unplugging the
charger from the wall will prevent the battery
from overcharging.
Note: If the battery is very low, the phone will
not turn On, but it will continue to charge at a
low rate. The phone will power up in charging
mode when the battery has been charged to
approximately 5% of its capacity. For faster
charging under a very low battery condition, it
is recommended to use the rapid charger
supplied with the handset.
turn it on & off
To turn on your
phone, press
and hold
E
for a
few seconds or
until the display
turns on.
If the phone is turned on while charging from
a computer, it will not fully charge the battery.
In this case, the battery charge will be
maintained approximately between 80% and
95% of the battery's capacity. Cables and
To turn off your phone, press and hold
two seconds.
E
for
Note: If you press
E
for more than four
seconds, the handset will power “On” on
essentials
14
“Transmitter Off” mode. See “transmitters”
on page 43.
2
3
If you want to hear the audio through the
ear speaker, press . To hang up press
S
E
.
If you are using a Bluetooth headset, you
can press the answer key on your
Bluetooth headset. To hang up press the
same key on your Bluetooth.
make phone a call
Enter a phone number and press
S
to make
a call or use a voice name. See “voice name”
on page 48.
Note: For best call quality avoid covering the
internal antenna with your hand.
make a private call
With Mike’s Direct Connect service, you use
your phone as a long-range, digital 2-way
radio using one-to-one Private calls or one-to-
many group calls.
To hang up press
E.
answer phone a call
Your Private ID is the number at which you
receive one-to-one Private calls.
When your phone rings and/or vibrates, you
have the following options to answer:
Talkgroup numbers are numbers through
which you receive one-to-many group calls.
1
If you want to answer the call on the
handsfree speaker phone, press the
speaker key
s.
Your Mike sales representative creates
Talkgroups for you and assigns each
essentials
15
Talkgroup to a Talkgroup number. You can
choose a name for each of your Talkgroups
when you create entries for them in Contacts.
When you send a call alert, the recipient’s
handset displays your name and emits a
series of beeps or vibrations.
The recipient has the following options:
to make a Private call
1
Enter the Private ID you want to call.
Option
2
Press and hold the PTT button. Begin
talking after your phone emits a chirping
sound.
Answer: Begin a Private call with the sender.
Queue: Store the call alert to the call alert
queue.
3
Release the PTT button to listen.
Clear: Dismiss and delete the call alert.
To end the call press
O.
to send a call alert
A Private call ends automatically if there is
no activity on the call for a few seconds.
1
Enter the Private ID you want to call as
you would when making a Private call.
send call alerts
Sending a call alert discretely lets the
recipient know that you want to talk to him or
her on a Private call.
2
3
Press
a
under Alert.
When the message Ready To Alert appears
on the display, press the PTT button until
the message Alert Successful: appears.
essentials
16
2
3
Queue the call allert by pressing
a
under
answer a private call
Queue
.
1
When your phone emits a chirping sound
or vibrates to indicate you are receiving a
Private call, wait for the caller to finish
speaking.
or
Clear the call alert by pressing
a
under
Clear
.
2
3
Press and hold the PTT button and begin
talking after your phone emits a chirping
sound.
store a phone number
or private ID
Release the PTT button to listen. To end
You can store a phone number or Private ID in
the call press
O
or press
a
under Exit.
Contacts
:
receive a call alert
When you receive a call alert, you must
answer, queue, or clear it. You cannot receive
phone calls or Private calls until you do.
1
2
Press
M
>
L
>
[New Contact].
Enter a name for the new entry. Each
entry’s name can contain up to 20
characters.
3
Select Ring Tones if you wish to assign a
specific ring tone to that phone number.
to answer a call alert
1
Press the PTT button to start a Private call
with the sender.
or
essentials
17
4
5
Select a type for the entry (Mobile
Pager, or Other). To store a
Private ID, choose Private
,
Work1
,
or
Work2 Home, Fax,
,
Find it:
M
>
L
.
1
Scroll to the Contacts entry.
Enter the number for the entry and press
under Done to save the entry.
Tip: By pressing the first letter of the
name of the Contacts you want, you will be
taken to all the contact names starting
with the letter you pressed.
a
Tip: Before saving the entry, you can save
more information. You can store E-mail
addresses, IP addresses, or Talkgroup IDs.
You can assign each number a speed dial
number and voice name. You can also create
Contact entries that are groups of Private IDs
called Group IDs.
2
3
If the Contacts entry contains more than
one number, scroll left or right until the
type of the number you want to call is
displayed (Mobile Private, Work1, Work2, Home,
etc.).
,
After you have saved the number, the new
Contacts entry is displayed.
If you choose a phone number, press
to call the entry.
S
or
call a stored phone
number or private ID
If you choose a Private ID, or Talkgroup
ID, press and hold the PTT button to call
the number.
Shortcut: From the home screen press
a
under Contcs
essentials
18
Tip: If the Contacts entry you scrolled to
contains a Private ID, you can make an instant
Private call to that Private ID by pressing and
holding the PTT button, even if the Private ID
is not the type of number displayed.
set it up
Before you begin using text messaging, you
may need to set up your signature, service
center number, and expiration information.
Shortcut: From the home screen press
under Mesg
a
>
M
your phone number and
Private ID
1
2
Scroll to Inbox
,
Drafts or Outbox.
Press Text Msg Setup.
M
>
Find it:
Tip: Want to see your phone number or
Private ID while you’re on a call? Press
M
>
J
The following options become available:
option
M
>
Signature: Enter your signature (up to 11
characters long).
My Info
.
Delivery Rpt: Set this option to On if you want
your phone to show you when the
message has been delivered.
text messages
Text messaging allows you to send and
receive short text messages to and from
other Mike handsets. Messages you receive
appear on your handset’s display and in the
text message inbox.
Srvc Cntr No: Enter the phone number of your
service center. If you do not know this
number, contact your service provider.
essentials
19
option
option
Expire After: This is the amount of time
messages you send are saved at the
service center if they cannot be delivered.
After this period, they are discarded.
Quick Notes: Quick notes are short, pre-written
text messages that you can create, edit,
and send in your text messages. You can
store up to 20 quick notes. A quick note
may be up to 30 characters long.
Scroll to select the number of days you
want your messages to be saved.
You can create a [New Note] or press
a
under Edit to change the pre-written quick
notes.
Auto Clean Up: Set this option to On if you want
your phone to delete sent messages.
If you set Auto Clean Up to On, select Clean Up After
to set the number of days after which sent
messages are deleted or the number of
messages to be kept.
Press
you entered.
a
under Done to save the information
receive a text message
1
To view the message press
To dismiss the message notification press
under Exit
a
under Read.
2
a
.
Note: If your phone is powered off when you
receive a text message, your phone notifies
you the next time you power it on. If you are
essentials
20
out of your coverage area, your phone alerts
you when you return to your coverage area.
create and send text messages
Shortcut: From the home screen press
a
Tip: While reading a text and numeric
message that contains a phone number, you
under Mesg.
1
2
3
4
Scroll to Inbox
Press under Create.
Select [Create Txt Msg]
,
Drafts or Outbox.
can press
S
to call that number.
a
read from the message center
.
1
From the home screen press
a
under
To address the message use the keypad
to enter the phone number of the person
you want to send the message to and
Mesg
>
Inbox
>
Text Inbox.
2
Select the message you want to read or
press the number of the message you
want to read. If the message fills more
than one screen, scroll to read it.
press
O.
or
Press
a
under Browse, and select Recent
Tip: Scrolling through one message lets
you view the next message.
Calls Contacts or Memo to find the number you
,
want.
3
To reply to the message, press
a
under
5
Select Msg: and enter the text of the
message or to use a quick note press
under Browse and scroll to the quick note
you want.
Reply or to see all other choices, including
forwarding and deleting the message,
calling the sender, or storing the sender’s
a
number in Contacts, press
M.
essentials
21
6
7
Press
,
M
>
Set Send Method and select Text
,
resend text messages
Shortcut: From the home screen press
Fax
x400
,
Paging Email ERMES, or Voice
,
,
.
a
If you want to send the message, press
under Send or to delete the message
without sending it, press under Cancel
under Mesg
>
Outbox
>
Text Outbox.
a
1
Scroll to the message you want to resend
or press the number of the message you
want to resend.
a
.
Note: If you want to request confirmation
of delivery press
M
>
Delivery Report
>
On.
2
Press
a
under Resend.
use drafts
When you save a message as a draft, it is
saved in the drafts folder.
delete sent text messages
Shortcut: From the home screen press
a
under Mesg
>
Outbox
>
Text Outbox.
Shortcut: From the home screen press
under Mesg
a
1
2
3
Scroll to the message you want to delete.
>
Drafts
>
Text Draft.
Press
Press
a
a
under Delete
.
1
Select the draft you want to edit. You also
have the choice to create new text
messages from this menu.
under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press
2
To edit the fields you want to change,
follow step 2 through step 5 in “create
and send text messages” above.
a
under Mesg
>
Outbox
>
Text Outbox.
1
Press
M
>
Delete All.
essentials
22
2
Press
a
under Yes to confirm.
2
Press
M
>
Text Msg Setup Mem Mtr-Inbox.
>
To view the amount of memory available in
your outbox and drafts folder:
manage memory
Your text inbox, outbox, and drafts folder have
a set amount of memory available for storing
messages.
Shortcut: From the home screen press
under Mesg
a
.
1
2
Scroll to Inbox
,
Drafts or Outbox.
The text inbox holds 20 messages. If the text
inbox is full, you cannot receive messages
until you delete some.
Press Text Msg Setup
M
>
>
Mem Mtr-Other.
using your handset
as a modem
You can use your handset as a modem
(Packet Data only) with a laptop, handheld
The outbox and drafts folder share memory
space. Togheter they can hold 30 messages.
If the outbox and drafts folder memory is full,
you cannot send messages or save drafts
until you delete some.
device, or desktop computer. Circuit Data is
not supported. In order to use your handset
as a modem, you must create a wired or
wireless connection between your handset
and the other device.
To view the amount of memory available in
your text inbox:
Shortcut: From the home screen press
a
under Mesg.
1
Scroll to Inbox, Drafts or Outbox.
essentials
23
To connect your phone wirelessly, you must
have a Bluetooth adapter for the other device.
To create a wired connection, use a USB
cable.
connect via Bluetooth
Use your handset as a modem via
Bluetooth. The laptop, handheld device, or
desktop computer you want to connect to
must have a Bluetooth adapter installed.
connect with a USB cable
Check that the adapter is properly installed,
and then follow the specific instructions
outlined in the device’s user guide to connect
the device to your handset.
Use a USB cable to connect your
handset to a laptop, handheld device, or
desktop computer.
1
Pull out the connector cover, and insert
the charger into mini USB connector on
your phone as shown.
When used as a modem, your handset is
enabled for Packet Data transfer mode, which is
used for small file transfers such as email.
Note: To use these services, you must install
the iDEN Wireless Data Services software
(available separately). For more information on
setting up your computer and your handset
for packet data calls, contact TELUS Client
Care.
2
Insert the data plug into the data port of
the other device.
essentials
24
main attractions
You can choose to send pictures and events
to the Private ID you are engaged in a a
Private call with, Private IDs on the Recent Calls
PTV features
Push To View (PTV) features let you
exchange the following items through
Private calls with other phones that have this
capability:1
list, and Private IDs stored in Contacts
.
When you make or receive a Private call, your
phone automatically determines whether the
phone you are engaged in a Private call with is
able to receive each of these items. Your
phone saves this information for as long as
the Private ID is on your Recent Calls list or is
saved in your Contacts. Your phone updates the
saved information each time you make or
receive a call to or from that Private ID.
•
•
•
•
Pictures1
Datebook events
My Info
Contact information
You can choose to send My Info and contact
information to any Private ID.
You can turn your phone’s ability to send and
receive pictures and events on and off.
Note: You cannot send PTT feature items
during Talkgroup calls.
1. Additional charges may apply.
main attractions
26
A list of pictures that can be included in a
Private call appears.
send pictures
You can send pictures stored in My
Pictures through Private calls. The picture you
send appears on the Private call recipient’s
display.
2
3
4
Select the picture you want to send.
Press the PTT button to send the picture.
Wait while the picture is transmitted. The
Private call is temporarily interrupted
while a picture is transmitted.
If the recipient accepts the picture, their
phone saves the picture.
The first time you send a stored picture after
turning the phone on, Picture Fees May Apply.
Continue? appears and you are prompted to
respond.
5
When prompted, press the PTT button to
resume the Private call.
start a call by sending a picture
Note: You cannot make or receive Private
calls while transmitting or receiving a picture.
from My Pictures
Find it:
M
>
My Pictures
send a picture during a call
1
2
Select the picture you want to send.
Press Send Picture.
1
While in a Private call, press
a
under
>
M
>
Use PTT Feature
>
Picture or press
M
>
Use PTT Feature
Send
A list of contacts that have Private IDs and
are able to receive pictures appears.
Picture.
main attractions
27
3
Select the name of the person you want
to send the picture to.
receive a picture
When someone sends you a picture, your
phone emits a tone or vibrates and a message
appears asking if you want to accept the
picture.
4
5
Press the PTT button to send the picture.
When prompted, press the PTT button to
resume the Private call.
Pictures you receive are saved to your
phone’s memory. They are accessible
from the PT Manager:
Find it: PT Manager Send Picture.
M
>
>
through My Pictures
.
1
Select A Contact, or A Recent Call to see a list of
entries that can receive pictures.
When you see a message asking if you want
to accept the picture, press Yes to accept or No
to decline.
2
Select the entry containing the Private ID
you want to send the message to.
Tip: If you want to stop the transmission
before it is finished, press
E.
3
4
5
Select the picture you want to send.
Press the PTT button to send the picture.
clear a picture from the display
If you want to clear a picture from your
phone’s display while still on a call, press
Once picture has been sent, when
prompted press the PTT button to resume
the call.
M
>
Clear Screen.
main attractions
28
The picture will not appear on the display
again the next time you receive a call from
person who sent it. This does not delete the
If you want to chose an event from
Datebook, select the event you want to
send.
picture from My Pictures
.
3
4
If the event is a recurring event: Select This
Event Only to send only the event selected.
Select Repeat Events to send all occurrences
of the event.
send events
You can send an event already stored in your
phone’s Datebook or create a new Datebook
event to send. When you create a new event
to send, the event is stored to your Datebook.
Press the PTT button to send the event.
Note: Datebook events can also be sent from
the Recent Calls list, the PT Manager or the Datebook.
1
While in a Private call, press
M
>
Use PTT
Feature
>
Send Event.
send My Info
Note: If these options do not appear on
the context-sensitive menu, the Private ID
you are engaged in the Private call with is
not able to receive Datebook events.
1
While in a Private Call press
PTT, and push the PTT button to send.
M
>
Send via
or
2
From the home screen press
Send via PTT and push the PTT
button to send.
M
>
My Info
2
If you want to create a new Datebook
> M
>
event to send, press
create the event.
a
under New and
or
main attractions
29
you entered in the My Name field of My Info
appears on the display of the recipient’s
phone, even if your name and Private ID are
not stored in the recipient’s Contacts.
set my info sending option
You can control what portion of the
information in My Info is sent and
whether it is sent automatically in every call or
only when you choose to send it.
send contact information
Find it:
M
>
PT Manager
>
Configure
>
PTT My Info
>
1
2
3
While in a Private Call press
M
>
Use PTT
Info to Send
Feature
.
1
Select or remove the fields you want to
send.
Select Send Contact and select the contact
information you want to send.
2
Press
a
under Done.
Push the PTT button to send.
or
The information your phone sends always
includes My Name and Private. You may also send
Line 1 Line 2, and Carrier IP, depending on your
1
2
From the home screen press
Manager > Send Contact.
M
>
PT
,
sending options.
Enter the Private ID number of the person
you want to send the Contact information
automatic sending
Find it:
Auto Send
M
>
PT Manager
>
Configure
>
PTT My Info
>
to or press
a
under Browse
.
>
On
3
Select from Recent Calls
,
Contacts, or Memo.
When you make a call in which your
information is sent automatically, the name
main attractions
30
4
Select the contact information you want
to send and push the PTT button.
One Touch PTT sets your phone to do any of the
following each time you press the PTT button
from the home screen:
turn PTT features on and off
You can turn your phone’s ability to send and
receive messages, pictures, and Datebook
events on and off.
option
Off: Nothing happens when you press the
PTT button from the home screen.
Last Call : Call the most recent Private ID or
Group on the recent calls list.
You cannot turn your phone’s ability to send
and receive My Info and contact information
on and off.
Assigned No.: Call a Private ID you assign.
Enter the number using your keypad, or
Find it:
M
>
PT Manager
Select On/Off PTT
Check or uncheck Messages
Events
>
Configure
press
a
under Search. Select Contacts
.
,
Recent
Calls, or Memo
1
2
.
Note: If you are entering a Talkgroup
number, enter before the number.
,
Pictures and/or
#
.
PT Manager: Go to PT Manager. See “PT
manager” on page 32.
one touch PTT
Send Picture: Go to the first screen to send
pictures. See “send pictures” on page 27.
Find it:
M
>
PT Manager > Configure
>
One Touch
PTT.
main attractions
31
or
option
2
Select Configure to configure your PTT Quick
Send Event: Go the the first screen to send a
Datebook event.
Notes PTT My Info, One Touch PTT, or On/Off PTT.
,
Send My Info: Go to the first screen to send My
Info. See “send My Info” on page 29.
services
Send Contact: Go to the first screen to send a
contact. See “send contact information” on
page 30.
Your handset is equipped with a
microbrowser that can be used to access
Mike's Wireless Web Services and other up-
to-the-minute information. You can view
specially designed text versions of popular
Internet sites that provide news, sports,
weather, entertainment, stock quote sites,
and other useful information.
PT manager
The PT Manager lets you quickly access PTT
features, and other Private call features, from
the main menu. You can also set the One
Touch PTT feature.
Find it:
M
>
PT Manager
access the microbrowser
The first time you use the microbrowser, you
will be required to go through a security setup
process that takes approximately one to three
1
Select Send Message, Send Picture, Send Event Send
My Info, or Send Contact. After choosing what
PTT item you are sending, select a
,
contact and press the PTT button to send.
main attractions
32
minutes. Please follow the on-screen prompts
to complete the security setup process. This
setup process will only occur the first time
you use the service.
during a normal phone call. These keys are
explained below:
E
Home key - press to return to the
default Home page (the page
first seen when you launch the
browser). Press and hold for
two seconds to exit the
browser.
Find it:
M
>
1
1
Once connected, the Homepage (or the
last page visited) will be displayed. To
access the Home menu page from any
other menu in the microbrowser, press
*
0
Asterisk/Back key - press to return
to the previous page viewed
before the current page.
S
.
2
To view additional text while visiting a
0/+ Next key - press after using
the back key to return to the
original page viewed.
site, use the navigation key
to read it.
to scroll
navigate the microbrowser
When you use the microbrowser, some keys
on your handset operate differently than
access the browser menu
1
Press and hold
menu.
M
to access the browser
2
Scroll to select the desired option.
main attractions
33
3
Press
-
under Ok to initiate the option.
option
option
Mark Site - identifies sites you would like to
visit easily and quickly from your
microbrowser.
Exit Browser - closes the browser and returns
you to the idle screen. Use this option
when you want to return to the page
currently viewed at a later time, without
navigating through the entire menu
structure again.
About Phone.com - contains information about
the version of the Phone.com browser
loaded on your handset.
Advanced Options - helps troubleshoot any
service issues you may have with your
browser.
Reload - reloads the current Wireless Web
page viewed, refreshing the information
with the most current from the information
provider.
end the microbrowser session
Home - returns you to your default Home
page, the first page you see when
launching the microbrowser.
At any point in the session, press and hold
for two seconds to exit the microbrowser.
E
Bookmarks - allows you to access bookmarks
you have created using the Bookmark
option.
®
bluetooth
Your phone supports the use of wireless
Bluetooth headsets.
Find it:
M
>
Bluetooth.
main attractions
34
The Bluetooth connection menu contains an
option to search for audio devices.
make a Bluetooth connection
connect your phone with a Bluetooth
headset
turn Bluetooth On or Off
You can turn your phone’s Bluetooth feature
on or off. While Bluetooth power is on, your
phone can communicate with other devices.
Find it:
M
>
Bluetooth
>
Hands Free [Find Devices].
>
1
Follow the instructions on your Bluetooth
headset to set it up to be found.
Find it:
M
>
Bluetooth
>
Setup Power > On.
>
2
Once your Bluetooth headset is set to be
found press
phone will scan the Bluetooth headset
until it finds it. Press when you see the
name of the Bluetooth headset on your
screen.
O
on your handset. Your
1
Select Name if you wish to assign a name
to your handset.
O
2
Select Find Me Time to determine the
amount of time in which your handset can
be found by other Bluetooth devices.
3
4
Your phone requires that you create a
bond in order to connect with a Bluetooth
Tip: You can turn off Bluetooth if you want to
prolong battery life or if you enter an area
where Bluetooth is prohibited.
headset. Press
-
under Yes when you
are prompted to bond with the headset.
Enter the Bluetooth pass key.
Some Bluetooth devices ship with
Bluetooth PINs. Please refer to your
main attractions
35
Bluetooth device’s user guide to locate
this information.
1
2
Select the device you want from the list of
found devices on your screen.
If a device ships without a Bluetooth PIN,
then refer to its user guide to set the PIN
on that device. To establish a connection
to that device, enter the same PIN for
both your phone and the device. For
example, if you enter 1234 as the device’s
PIN, then enter 1234 as your phone’s PIN.
Create a bond if you are prompted to do
so.
Tip: If you have previously connected to a
device, the device will be stored on your
phone so you can connect with it easily.
use Bluetooth during a call
You can connect with available Bluetooth
devices during a call.
5
Press
-
under Ok.
Note: This handset offers a bluetooth auto
pair feature with auto pair compatible
Motorola devices. When bonded via
bluetooth with a certain device, the pin will
not be required.
Note: If the Handsfree Devices list contains only
one device, then your phone will
automatically try to connect to that device.
1
2
While in a call, press
Press under Yes to power On
Bluetooth.
M
>
Use Bluetooth.
connect your phone with another
device
-
Find it:
M
>
Bluetooth Link To Devices.
>
3
Select the audio device you want to
connect to from the list of Handsfree Devices
.
main attractions
36
or
send information via Bluetooth
Search for the device by selecting [Find
You can use your phone to send Contacts
entries, Datebook events, or pictures to
another Bluetooth device.
Devices]
.
5
If prompted, bond with the device.
The receiving device must be within 32 feet
(10 meters) of your phone in order to connect
with yours.
Your phone connects with the device and
transfers the contact.
send a Datebook event
Find it: Datebook
Note: Files sent or received may be up to
200 kb.
M
>
1
Select the datebook event you want to
send.
send Contacts
Shortcut: From the home screen press
under Contcs.
-
2
Press
M
>
Send Via... > Bluetooth.
If the event you select repeats, then you
will be prompted to choose whether to
send the selected instance of the event or
all instances of the event.
1
2
3
Select the contact you want to send.
Press
Press
M
>
Send Via... > Bluetooth.
-
under Yes to power On
Bluetooth.
To send only the selected instance of the
event, select This Event Only
.
4
Select the device you want to transfer the
contact information to.
or
main attractions
37
To send all instances of the event, select
1
2
3
Select the picture you want to send.
Press
Repeat Events
.
M
>
Send Via... > Bluetooth.
3
4
Press
-
under Yes to power On
Select the device you want to transfer the
contact information to.
Bluetooth.
Select the device you want to transfer the
contact information to.
or
Search for the device by selecting [Find
or
Devices]
.
Search for the device by selecting [Find
4
If prompted, bond with the device.
Devices]
.
Your phone connects with the device and
sends the datebook event.
5
If prompted, bond with the device.
Your phone connects with the device and
sends the datebook event.
send pictures via Bluetooth
Note: Note: You can only send audio files,
and pictures if they are not forward locked
and if their DRM settings do not prevent you
from sending.
Find it:
M
>
My Pictures.
main attractions
38
basics
See page 1 for a basic phone diagram.
Soft key labels show the current soft key
functions. For soft key
page 1.
a
locations, see
display
The home screen shows when you turn on
status indicators
Status indicators are shown at the top of the
home screen:
the phone. To dial a number from the home
screen, press number keys and
S.
Note: Your home screen may look different.
3.
5.
6. 7.
1. 2.
4.
1
Signal Strength Indicator: Vertical bars
show the strength of the network
basics
39
connection. You can’t make or receive
calls when or shows.
text entry
Some features let you enter text.
1
0
2
3
Active Phone Line: 1 indicates phone line
Your phone provides convenient ways to
enter words, letters, punctuation, and
numbers whenever you are prompted to
enter text (for example, when adding a
Contacts entry or when text messaging).
1 is ready to make calls.
Speaker Off: Sounds associated with
Private calls and group calls are set to
come through the earpiece rather than
through the speaker.
change the character input mode:
4
5
Ringer Off: Your phone is set to not ring.
1
When you see a screen where you can
enter text, press to change the
character input mode.
Message Indicator: Shows when
you receive a text message.
M
6
7
Packet Data: Your handset is ready to
transfer packet data or is transferring
packet data.
Battery Charge Indicator: A fuller battery
indicates a greater charge. Recharge the
battery when your phone shows Low
Battery.
basics
40
2
Select one of the following options:
Word English Text Input analyzes the letters
you enter using an intuitive word database
and creates a suitable word. (The word may
change as you type.)
entry modes
Alpha
Word
Press a key several times for
each character.
enter a word using Word Character
Input:
Enter words using a predictive
text entering system that lets
you enter a word with fewer
keypresses.
1
Select the Word character input mode.
2
Press the corresponding keys once per
letter to enter a word (for example, to
enter the word Jeff, press 5 3 3 3).
Symbols
Numeric
Enter symbols.
Enter numbers by pressing the
numbers on the keypad.
(If you make a mistake, press
to erase a single character.
Press and hold under Delete or to
delete an entire entry.)
a
under
Delete or
*
a
*
Tip: When entering text, press and hold
change letter capitalization (Abc
# to
>
ABC
>
abc).
3
To accept a word and insert a space,
press
#
.
word mode
Word English Text Input lets you enter text
into your phone by pressing keys just once
per letter.
basics
41
Characters scroll in the following order:
alpha mode
characters
enter characters by tapping the keypad:
1
2
3
4
5
6
7
8
9
0
#
*
. ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ % £ ¥
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
1
Select the Alpha mode.
2
Press the corresponding keys repeatedly
until the desired letter appears. (For
example, to enter the word Jeff, press
5
once,
3
two times,
3
three times, and
J K L 5
3
three times again. If you make a
M N O 6 Ó Õ Ô Ò
P Q R S 7 ß
mistake, press
a
under Delete to erase a
single character. Press and hold
Delete to erase an entire entry.)
a
under
T U V 8 Ú Ü Û Ù
W X Y Z 9
By default, the first letter of an entry is
capitalized and the following letters are
lowercased. After a character is entered, the
cursor automatically advances to the next
space after two seconds or when you enter a
character on a different key.
+ - 0 * / \ [ ] = > < # §
Space
Back
basics
42
volume
handsfree speaker
Press the volume keys up
or down to:
You can use your phone’s hands-free speaker
to make calls without holding the phone to
your ear.
•
•
•
turn off an incoming
call alert
During a call press the
speaker key
s
to
change the earpiece
volume during calls
turn the hands-free
speaker on.
change the ringer
volume from the
home screen.
The hands-free
speaker stays on until
you press the speaker key or end the call. The
next phone call will redirect the audio back to
the earpiece.
navigation key
Press the navigation key
up, down, left, or right
to scroll to items in the
display. When you scroll
transmitters
Note: Consult airline staff about the use of
the Transmitters feature during flight. Turn off
your phone whenever instructed to do so by
airline staff.
to something, press
O.
basics
43
Transmitters turns off your phone’s calling
features in situations where wireless phone
use is prohibited, but you can use the phone’s
other non-calling features when Transmitters
turned Off.
Electronics Association 0183 V3.0 (NMEA-
0183) standard. As such it supports the
following sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
This handset is not a full NMEA-0183
Find it:
M
>
u
>
Advanced > Transmitters > Off
.
compliant device supporting electrical RS-
422/RS-232 connectivity as dictated by the
NMEA-0183 standard. Consequently it's
unsuitable for conventional marine NMEA-
0183 equipment use. Its intended use is for
normal "terrestrial" mobile users who want to
enable their USB hosting computing devices
such as a PC, laptop or PDA with the phone's
highly-capable GPS functionality.
use GPS with map
software
Your phone is enabled with a highly-capable
GPS receiver that sends location information
to a USB port on a PC, laptop, or PDA.
Note: No serial port connectivity is provided
by your phone. Applications on the host
device which are expecting to receive the
GPS location information via a serial port must
instead use a Virtual Serial Comm Port.
get connected
1
Slide open the
phone's bottom
connector and
insert a mini-
The data sent to the host device is formatted
as prescribed in the National Marine
basics
44
USB cable into the phone's bottom
connector.
4
5
Start the GPS application on your host
device. Set the GPS application to start
accepting NMEA-0183 formatted data
from the created Virtual COMM port.
2
3
Insert the other end of the mini-USB cable
into a vacant USB receptacle of your host
device. A virtual USB Comm Port will be
created on your host device upon
successful enumeration of the phone as a
USB Communications Device Class
device.
Set your phone to start sending NMEA-
0183 formatted location information.
Find it:
M
>
GPS > Interface > NMEA OUT > USB.
Your phone is now actively sending location
NMEA-0183 formatted GPS data to your USB
host device.
Ensure no application in your host device
is using the created COMM port. You
may need to ensure that the created
virtual COMM port settings are set as
follows:
To stop your phone from sending location
data:
Find it:
M
>
GPS > Interface > NMEA OUT > Off.
•
•
•
•
•
Bits per second: 4800
Data bits: 8
Note: Each time you power your phone Off,
NMEA OUT is automatically set to Off and
you need to manually restart it using the
menu selections above.
Parity: None
Stop bits: 1
Your USB host device will generally provide
charging power (5V, up to 500mA) to your
Flow control: None.
basics
45
phone via the mini-USB cable therefore no
other charging power to it will normally be
required. However some laptops may require
that you provide external AC/DC power to the
laptop in order for it to provide full 500mA
charging current capability to the phone.
basics
46
calls
To make and answer calls, see page 15.
Find it:
Tip: You can also access the Recent Calls list
by pressing the navigation key down.
M
>
Recent Calls.
recent calls
The Recent Calls list contains information
associated with calls you have made and
received and call alerts you have received.
1
2
Scroll through the list.
Highlight the item you want to view or
perform some action on.
When you send or receive Private calls, the
Recent Call list contains the following PTT items
with those calls:
3
To view more details of the item press
O.
store an item to contacts from
recent calls
Phone calls, Private calls, My Info received
from other phones, or Contacts entries
received from other phones can be stored to
the Contacts list from the Recent Calls list.
•
•
•
•
Pictures
Events
My Info
Contacts
The recent calls list displays up to 20 of the
most recent calls and call alerts.
Find it:
M
>
Recent Calls.
calls
47
1
2
Scroll to or select the item you want to
store.
voice name
You can place calls by speaking comands to
your phone if you have previously assigned a
voice name to your contacts.
Press
a
under Save to store the
information as a new entry in the
Contacts list.
assign voice names to contacs:
or
1
2
3
4
Press
Contact].
a
under Contcs and select [New
3
4
If Save is not one or you options, press
>
want to update.
M
Update Contacts. And select the contact you
Assing a name, phone number and select
[Options]
.
Press under Done to save your changes.
a
Select Voice Name and follow the propmt to
record the voice name.
redial
Press
save the entry.
a
under Back and
a
under Done to
To redial your last outgoing phone call, press
and hold or push the PTT button if it was a
private call.
N
place a call using voice command:
From the home screen press and hold the
speaker key until you are prompted to
say the voice name.
1
s
calls
48
2
The handset will automatically place the
call.
call forward
Call forwarding sends calls to the phone
numbers you specify. You can forward all calls
to one number or forward missed calls to
different numbers depending on the reason
you missed the call. You can forward phone
lines 1 and 2 independently.
caller ID
Caller ID allows people to identify a
caller before answering the phone by
displaying the number of the incoming call. If
you do not want your number displayed when
you make a call, just follow these easy steps.
Find it:
M
>
Call Forward.
1
To forward all calls select All Calls and
select To to enter the phone number you
want all your calls forwarded to.
To block your phone number from being
displayed for a specific outgoing call:
1
2
3
Press * 6 7
Enter the number you want to call.
Press
.
or
2
You can specify a forwarding number for
each type of missed call by selecting
Detailed and chosing the following options:
S
.
To permanently block your number, call TELUS
Client Care.
option
If Busy: When your handset is on a call or
transferring data.
calls
49
when your SIM card is blocked or not in your
phone.
option
If No Answer: When you do not answer on the
first 4 rings.
Dial 911 or your local emergency number to
be connected to an emergency response
center. If you are on an active call, you must
end it before making an emergency call.
If Unreachable: When your handset is out of
coverage or powered off.
When you make an emergency call, your
phone’s GPS Enabled feature can help
emergency calls
emergency service personnel find you, if you
are in a location where your phone's GPS
antenna has established a clear view of the
open sky and your local emergency response
center has the equipment to process location
information. Because of the limitations of this
feature, always provide your best knowledge
of your location to the emergency response
center when you make an emergency call.
TELUS programs one or more emergency
phone numbers that you can call under any
circumstances, even when your phone is
locked or the SIM card is not inserted.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency
number(s) may not work in all locations, and
sometimes an emergency call cannot be
placed due to network, environmental, or
interference issues.
Note: Emergency calls cannot be placed
while the keypad is locked.
Your phone supports emergency calling.
Emergency phone calls can be made even
calls
50
Note: If you have not registered on the
network, emergency calls cannot be placed
while your SIM card is in your phone.
Except that the number is led by "*", "00",
"011" or the number contains "+".
Note: You can also use Prepend temporarily
when the feature is set to Off. For example,
enter the phone number from the home
international calls
screen and press
M
>
Add Prepend. The
If your phone service includes international
dialing, press and hold 0 to insert your local
international access code (indicated by +).
Then, press the keypad keys to dial the
country code and phone number.
temporary prepend will be inserted to the
number you are dialing.
speed dial
You can aditionally enable a predefined prefix
to the dialing number by using Prepend dialing.
Each phone number stored in Contacts is
assigned a Speed Dial number, which you can
use to call that number.
Find it:
M
>
Settings
>
Phone Calls
>
.
Prepend.
1
From the home screen, use the keypad to
enter the Speed Dial number assigned to
the phone number you want to call.
1
2
Select Prepend and set it to On
Select Number and add the prefix number of
your choice.
2
3
Press
Press
#
S
.
.
When the Prepend feature is set to On, the
predefined prefix is inserted to the front of
the number that you are dialing.
calls
51
If the caller leaves a message, this icon y
appears on the display, reminding you that
you have a new message.
turbo dial
The first nine entries in your contacts are set
for turbo dial. They can be called by pressing
and holding the speed dial number
(1 through 9).
advanced voice mail with fax
Mike's Advanced Voice Mail with Fax allows
you to receive faxes directly to your handset
and store them along with your voice
messages until you are ready to print. Follow
the voice mail prompts to print the fax to a fax
machine. It ensures privacy, convenience and
eliminates the need for a separate fax line.
voice mail
Note: To receive voice mail messages,
you must first set up a voice mail
account with TELUS.
When you subscribe to Mike's
receive a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
Advanced Voice Mail with Fax, you will
receive a fax number from your point of
feature activation. If you have not received a
fax number, please contact the nearest
TELUS dealer or call TELUS client care.
•
•
To call TELUS voice mail system and
listen to the messages, press
under Call
a
.
more details of TELUS Voice Messaging
services.
To dismiss the message notification
press
O, or
a
under Back.
calls
52
Mike’s Talk AroundTM
Mike’s Talk Around allows direct two-way
handset-to-handset communications between
two or more handsets equipped for Mike’s
Talk Around. You can make and receive
fax mail Indicator
Your handset is equipped with a Fax Mail
indicator to notify you when you have
received a fax through Mike's Advanced
Voice Mail with Fax.
Mike’s Talk Around calls even when network
service is not available. You can talk to anyone
on your code and channel within your range.
Shortcut: From the home screen press
under Mesg
a
>
Fax Mail.
When you receive a new fax, New FaxMail
Message appears on the display.
Note: Range will vary based on terrain, man-
made structures and atmospheric conditions.
Your handset will alert you audibly until you
Mike’s Talk Around allows you to use code or
private mode operation, use up to 10
channels and communicate with standalone
Mike’s Talk Around radios.
press
a
under Call or
a
under Exit.
net alerts
When you receive a Net Alert, a notification
appears on the display.
Note: Mike’s Talk Around is not compatible
with older Family Radio Services products.
If you dismiss the notification, this icon w
appears on the display, reminding you that
you have a new message.
The following features and main menu items
will not be available while in Talk Around
mode:
calls
53
•
•
•
•
•
•
•
•
•
•
On-network phone calls
On-network Private calls
Data transmission
Incoming message notification
Musical ring tones
Call forwarding
are set to appears on the second line of the
display and TA Ready appears just above the
softkeys.
Note: When switching from the network to
Talk Around, the last channel and code that were
set appear on the Talk Around idle screen.
While in Talk Around, this icon
m
appears on the
display, indicating that there is no network
signal and Talk Around is active.
Messages
Call Timers
Phones used in Talk Around mode should be
a minimum of 6 feet apart to maximize
performance and improve transmission range.
Call alerts
Voice records
exit Talk Around
set your phone to Mike’s Talk
Around
Find it:
M
>
TA Options > Exit TA.
The following message displays: Switching to
Network Please Wait. After a few seconds, the
network idle screen appears.
Find it:
M
>
Talk Around > Go To TA.
After a few seconds, the Talk Around idle screen
appears. The channel you are set to appears
on the first line of the display, the code you
calls
54
set a channel
channels and codes
Your phone has 10 channels and 15 codes.
1
From the Talk Around idle screen, press
under Edit
a
.
Channels are divided into sets of frequencies
that allow you to make and receive Talk
Around calls. Other parties may also be
talking on the same channel.
2
3
4
Scroll to Channel and press
Select a channel number from 1 to 10.
When you are finished, press under
a
under Edit.
a
Codes help minimize interference from
unwanted messages and other disturbances
when you are on the same channel as others.
Back to return to the Talk Around idle
screen.
set a code
To have a conversation, all parties must be on
the same channel and code. For private Talk
Around calls, the person you are calling must
be in Talk Around and set to the same
channel to receive your call.
1
From the Talk Around idle screen, press
under Edit
a
.
2
Scroll to Code and press
a
under Edit.
Note: When making a code call, all parties
that are on your code and channel can hear
your conversation.
calls
55
3
Select a code number from 1 to 15 or one
of the following options:
option
Pvt Only
option
Allows you to have a private conversation
with another person using Talk Around.
When on a private Talk Around call, no
other parties can hear your conversation. In
order to make a private Talk Around Call,
you must use the valid 10-digit Personal
Telephone Number (PTN) of the person you
are calling. The person you are calling must
be in Talk Around and set to the same
channel to receive your call.
Receive All:
Sets your phone to receive Talk Around
transmissions from any phone that is set to
the same channel, regardless of the code
(1-15). When you receive transmissions
with the code set to Receive All, the display
changes from Receive All to the code on
which the transmission was received.
Tip: You can reply to an incoming call within
6 seconds after hearing the short ending
beep by pressing the PTT button.
Note: An error message will occur if you
don’t use a valid PTN, or the person that
you are trying to reach is not in Talk Around,
or is set to a different channel or out of
range.
Note: You cannot initiate a code call when
the code is set to Receive All. If you push the
PTT button with the code set to Receive All
,
you will receive an error message.
4
When you are finished, press
a
under
Back to return to the Talk Around idle
screen.
calls
56
Note: An incoming Talk Around call can be
terminated at any time by pressing
make and receive code calls in
Talk Around
P
.
To make a code call in Talk Around:
make a private Talk Around call
1
Push and hold the PTT button. TA Transmit
appears on the first line of display. Begin
speaking after your phone emits the Talk
Around tone.
1
Enter the 10-digit PTN of the person you
want to call on your channel, or press
under Contacts and select a contact, or scroll
to a number in the recent calls list.
a
2
Release the PTT button to listen.
2
3
Push and hold the PTT button. Begin
speaking after your phone emits the Talk
Around tone.
Note: The tone emitted from your phone
when using Talk Around is 4 beeps and
sounds different from the standard tone
heard with on-network Private and group
calls.
Release the PTT button to listen.
The number or name of the person you are
calling will appear in the first line of the
display.
You could receive an error message if
there are no parties on your channel or
code, or if you are out of range.
When you receive a code call using Talk
Around, Receive appears on the first line of the
display.
calls
57
automatically exit Talk Around mode and
attempt to find a network signal.
receive a private Talk Around
call
Note: If you are out of network coverage your
phone will not be able to make an emergency
911 cellular call until you go back into the
network coverage area.
1
The number or name of the person who
initiated the call will appear in the first line
of the display.
2
You can reply within 6 seconds simply by
pushing the PTT button.
You must wait until the phone reconnects to
the network before attempting to make an
emergency 911 cellular call.
end a private Talk Around call
A private Talk Around call will end if there is
no communication for 6 seconds.
setup options
Talk Around setup options are available in the
TA Options screen in both network and Talk
Around modes.
Note: A private Talk Around call may be
interrupted during the 6 second idle time by
another code call or private call.
access setup options in network
make emergency calls while in
Talk Around mode
If you attempt to make an Emergency 911 call
while in Talk Around mode, your phone will
Find it:
access setup options in Talk Around
Find it: TA Options Setup
M
>
Talk Around
>
Setup.
M
>
>
.
calls
58
The following options become available:
option
Direct Launch
Launchs your phone directly into Talk
Around when you select Talk Around from
the Main Menu. If Direct Launch is set to On
,
you will not see TA Options when you select
Talk Around from the main menu. In order to
have access to your setup options, Direct
Launch must be set to Off. Or you can access
setup options while in Talk Around by
pressing m and selecting TA Options
.
State Tone
Notifies you periodically with a tone that
you are in Talk Around mode. You can select a
time frame during which you want to be
notified that you are in Talk Around mode.
Select from 30 minutes
,
1
,
2
,
3
or 4 hours.
calls
59
customize
2
Scroll through the list of ring tones and
select the one you want to assign. Vibrate
sets your phone to vibrate instead of
making a sound; Silent sets your phone to
neither vibrate nor make a sound.
ring tones
To set the ring tone your phone makes when
you receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT
or Datebook reminders:
Tip: Highlighting a ring tone lets you hear
it.
Note: Only ring tones stored in your
phone’smemory are available in the ring tones
list. To assign a ring tone stored on a memory
card inserted in your phone’s memory card
slot, you must go to the media center. Ring
tones purchased or received from TELUS can
be assigned as ring tones. Other audio files
may not be supported as ring tones..
3
4
Select the features you want to assign the
ring tone to.
When you are finished, press Done
.
Note: This icon
you set your phone to Silent. This icon
appears on the display if you set the phone to
Vibrate All
M
appears on the display if
Q
.
Find it: M > Ring Tones
1
Make sure Vibrate All is set to Off.
customize
60
set your phone to vibrate
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s home
screen or throughout all menu screens.
You can set your phone to vibrate instead of
making a sound when you receive all phone
calls, Private calls, group calls, call alerts,
messages notifications, pictures sent using
Send via PTT, and Datebook reminders.
Find it:
M
>
Settings
>
Display/Info > Wallpaper
>
Wallpaper.
Find it: M> Ring Tones > Vibrate All
>
On.
To select a wallpaper image scroll through the
list of pictures and press
picture of your choice.
To set your phone to vibrate instead of
making a sound for some features but not
others:
O
to select the
Note: You can set the wallpaper to change
automatically after a certain period of time by
turning on the Auto Cycle feature located in the
Wallpaper menu.
Find it: M> Ring Tones
1
2
3
Make sure Vibrate All is set to Off.
Select Vibrate from the list of ring tones.
Select the features you want to set to
make no sound.
backlight
Set the amount of time that the display and
java apps. backlights remain on, or turn off the
backlight feature to extend battery life.
4
When you are finished, press
a
under
Done
.
customize
61
Find it:
M
>
Settings
>
Display/Info > Backlight
option
Alert Timeout: Sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
datebook
Find it: M > Datebook > M> Setup
Clock: Controls whether the time and date
appear on the home screen; sets time and
date format.
You can view or change these options:
option
Start View: Sets Datebook to start in day view,
week view, or month view when you
access Datebook.
hide or show
location information
Your phone is equipped with a Location
feature for use in connection with location-
based services that may be available in the
future.
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in
week view, if you have a 12-hour day view.
Delete After: Sets the amount of time
Datebook waits to delete an event after it
occurs.
The Location feature allows the network to
detect your position. Turning Location off will
hide your location from everyone except for
your local emergency response center.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
customize
62
Note: Turning Location on will allow the
network to detect your position using GPS
technology, making some applications and
services easier to use. Turning Location off
will disable the GPS location function for all
purposes except 911, but will not hide your
general location based on the cell site serving
your call. No application or service may use
your location without your request or
permission. GPS-enhanced 911 is not
available in all areas.
set your privacy options
Find it:
M
>
GPS
>
Privacy
Select Restricted
,
Unrestricted, or Ask Access
.
customize
63
other features
advanced calling
feature
feature
3-way call
Make or receive a
phone call and press
call waiting
Find it: To accept the
second call and put
M
>
3 Way. Enter the
second phone number,
press and under Join.
the active call on hold press
N
a
a
under Yes.
Tip: For quick ways to enter
the number, press to
see the dialing menu.
To accept the second call
and end the active call press
M
S
.
You cannot make any other
calls after you have joined a
3-way call, even if one party
disconnects.
Your phone rings with the
second call for you to
answer.
other features - advanced calling
64
contacts
datebook
feature
feature
edit/delete
Press
a
under Contacts
.
create
datebook
events
To create a new Datebook
event press
[New Event].
contact entry Select a contact and press
M
>
D
>
M
>
Edit. Change the
desired content and press
see datebook To see a calendar event
event
a
under Done
.
press
M
>
D
>
left
set ringer ID
Press
a
under Contacts
.
or right to see the day and
up or down to see the
events.
Select a contact and press
Ringer. Select
desired ringer, press
under Back, and under
M
>
Edit
>
a
event
reminder
When an event reminder
a
occurs press
a
under View.
Done
.
Press under Back to close
a
the reminder.
other features - contacts
65
GPS
To improve GPS performance:
feature
receive
datebook
events via
PTT
To view the information
while still in the Private call
•
•
Stay in the open,
press
r.
Move away from other electrical or
electronic devices
The 5 most recent events
received from a Private ID
are stored with the that
Private ID on the recent
calls list.
•
•
Remain stationary.
Avoid covering the antenna with your
hands.
To store events to the
feature
Datebook press
a
under
Save while viewing the event
you want to store.
view
To see where you currently
approximate are press
M
>
GPS
>
Position.
location
Scroll to view the entire
screen.
To recalculate position press
Rfrsh. This may take several
minutes.
other features - GPS
66
handsfree
feature
set GPS
privacy
options
To set the level of privacy for
your GPS system press
Note: The use of wireless phones while
driving may cause distraction. Discontinue a
call if you can't concentrate on driving.
Additionally, the use of wireless devices and
their accessories may be prohibited or
restricted in certain areas. Always obey the
laws and regulations on the use of these
products
M
>
GPS
>
Privacy.
If your GPS PIN security
feature is enabled, enter your
GPS PIN and select the
privacy option you want.
change GPS Note: Your default GPS PIN is
PIN
0000.
feature
To change your GPS PIN
speaker-
phone
To activate the
press
Change Passwds GPS PIN
M
>
Settings
>
>
Security
.
>
speakerphone while
driving press and hold
the speakerphone key
s
.
Enter the current GPS PIN and
enter the new 4- to 8-digit
GPS PIN. Re-enter the new 4-
to 8-digit GPS PIN to confirm.
auto answer
To automatically answer
calls when connected to a
car kit or headset press
M
>
Settings
>
Phone Calls
>
Auto
Ans. Select the amount of
rings before answering.
other features - handsfree
67
personalize
pc applications
feature
feature
language
To set the language of your
menu press
other PC
applications applications visit
For a list of complete PC
M
>
Settings
>
Display/Info
>
Language.
backlighttime To select how long the
length
display screen and keypad
TTY
feature
are backlit press
M
>
>
Settings
>
Display/Info
Backlight.
menu style
To show the Main Menu as
graphic icons or a text-based
turn On TTY From the home screen
feature
press
M
TTY
>
>
Settings
Use TTY
>
>
Phone
On.
list press
Display/Info
M
>
Settings
>
Calls
>
>
Menu View.
choose TTY From the home screen
clock display To display the clock on your
home screen press
mode
press
M
TTY
>
>
Settings
Type.
>
Phone
M
>
Calls
>
Settings
Display
>
>
Display/Info
On.
>
Clock
>
Select from TTY, VCO or HCO.
other features - personalize
68
feature
feature
change the
TTY baud
rate
From the home screen
keypad lock To lock the keypad press
M
press
M
>
>
Settings
Baud.
>
Phone
>
>
Settings
>
Security Keypad Lock
>
Calls
>
TTY
Lock Now or Auto Lock
Select 45.45 or 50.00
change TTY While in the TTY call, press
Shortcut: To lock the
keypad press
enable SIM To enable SIM PIN, press
M
>
*
mode
M
>
In Call Setup
>
TTY
>
Type.
during a call
PIN
M
>
.
Settings
>
Security SIM PIN
>
Select from TTY, VCO or HCO
.
>
On
change SIM To change the SIM PIN,
PIN press
security
feature
M
>
Settings
>
Security
>
Change Passwds SIM PIN
>
.
phone lock
To lock the phone press
M
Note: You can make emergency calls on a
>
>
Settings
Lock Now or Auto Lock.
>
Security
>
Phone Lock
locked phone (see page 50). A locked phone
still rings or vibrates for incoming calls or
messages, but you need to unlock it to
answer.
other features - security
69
other features - security
70
Important Safety and
Legal Information
71
Safety and General Information
Safety Information
This section contains important information on the safe and
•
•
•
•
•
United States Federal Communications Commission, Code
of Federal Regulations; 47 CFR part 2 sub-part J.
efficient operation of your phone. Read this information
before using your integrated multi-service portable radio.*
American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
Exposure to Radio Frequency (RF)
Energy
Your phone contains a transmitter and receiver. When it is ON, it
receives and transmits RF energy. When you communicate with
your phone, the system handling your call controls the power level
at which your phone transmits.
Your Motorola phone is designed to comply with local regulatory
requirements in your country concerning exposure of human beings
to RF energy.
Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.*
International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
•
•
Australian Communications Authority Radio
communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
Portable Radio Product Operation and
EME Exposure
ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) "Regulation of the limitation of exposure to
Your Motorola radio product is designed to comply with the
following national and international standards and guidelines
regarding exposure of human beings to radio frequency
electromagnetic energy (EME):
*
The information provided in this document supersedes
the general safety information in user’s guides
published prior to May 1, 2006
Safety Information
72
electrical, magnetic, and electromagnetic fields in the
radio frequency range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2, 2002."
When using your radio product as a traditional
two-way radio, hold the radio product in a
vertical position with the microphone one
to two inches (2.5 to 5 cm) away from the
lips
.
Operational Precautions
To assure optimal radio product performance and to be sure that
human exposure to RF does not exceed the guidelines set forth in
the relevant standards, always follow these instructions and
precautions:
If you wear a radio product on your body when
transmitting, always place the radio product in a Motorola
approved clip, holder, holster, case or body harness. If you do not
use a body-worn accessory supplied or approved by Motorola and
are not using the radio product in the intended use positions along
side the head in the phone mode or in front of the face in the
two-way radio mode, or if you hang your device from a lanyard
around your neck, keep the device at least 2.5 centimeters (1 inch)
from your body when transmitting.
Phone Operation
When placing or receiving a phone call, hold your radio product as
you would a wireline telephone. Speak directly into the
microphone
.
Approved Accessories
Two-way radio operation
For a list of approved Motorola accessories call 1-800-453-0920, or
Your radio product has been designed and tested to comply with
national and international standards and guidelines regarding
human exposure to RF electromagnetic energy, when operated in
the two-way mode (at the face, or at the abdomen when using an
audio accessory) at usage factors of up to 50% talk/50% listen.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference
from external sources if inadequately shielded, designed or
otherwise configured for RF energy compatibility. In some
circumstances your handset may cause interference with other
devices.
Transmit no more than the rated duty factor of 50% of the time. To
transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important
because this radio generates measurable RF energy only when
transmitting (in terms of measuring for standards compliance).
Safety Information
73
your wireless phone with your implantable medical device, consult
your health care provider.
Follow Instructions to Avoid Interference
Problems
Turn OFF your radio product where posted notices instruct you to
Hearing Aids
Some phones may interfere with some hearing aids. In the event of
such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
do so.
In an aircraft, turn off your radio product whenever instructed to do
so by airline staff. If your radio product offers an airplane mode or
similar feature, consult airline staff about using it in flight.
Other Medical Devices and Health Care Facilities
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker
or defibrillator, consult your physician before using this radio
product.
If you use any other personal medical devices, consult your
physician or the manufacturer or your device to determine if it is
adequately shielded from RF energy. Turn off your radio product
when instructed to do so in hospitals or health care facilities that
may be using equipment that is sensitive to external RF energy.
Persons with implantable medical devices should observe the
following precautions:
Driving Precautions
•
ALWAYS keep the phone more than 20 centimeters (8
inches) from the implantable medical device when the
phone is turned ON.
Check the laws and regulations on the use of radio products in the
area where you drive. Always obey them.
•
•
DO NOT carry the phone in a breast pocket;
When using your radio product while driving, please:
Use the ear opposite the implantable medical device to
minimize the potential for interference.
•
Give full attention to driving and to the road. Using a
phone may be distracting. Discontinue a call if you can’t
concentrate on driving.
•
Turn OFF the phone immediately if you have any reason to
suspect that the interference is taking place.
•
•
Use hands free operation, if available.
Read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
Pull off the road and park before making or answering a
call if driving conditions so require.
Safety Information
74
•
Do not place a handset in the airbag deployment area.
Batteries and Chargers
Responsible driving practices can be found in the “Smart Practices
While Driving” section at the end of this guide and/or at the
Caution: Improper treatment or use of batteries may present
a danger of fire, explosion, leakage, or other hazard. For
more information, see the “Battery Use and Battery Safety”
section in this user’s guide.
Your battery, charger, or portable radio may contain symbols,
defined as follows:
Note: The use of wireless phones while driving may cause
distraction. Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may
be prohibited or restricted in certain areas. Always obey the laws
and regulations on the use of these products.
Symbol
Definition
032374o
Important safety information
follows.
Operational Warnings
Obey all posted signs when using phones in public areas.
Do not dispose of your battery
or phone in a fire.
Potentially Explosive Atmospheres
Your battery or phone may
require recycling in
Areas with potentially explosive atmospheres are often but not
always posted, and can include fueling areas such as below decks
on boats, fuel or chemical transfer or storage facilities, or areas
where the air contains chemicals or particles, such as grain, dust
or metal powders.
032375o
accordance with local laws.
Contact your local regulatory
authorities for more
information.
When you are in such area, turn off your handset, and do not
remove, install, or charge batteries unless it is a radio product type
especially qualified for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved). In such areas,
sparks can occur and cause an explosion or fire.
Do not throw your battery or
phone in the trash.
Your phone contains an
internal lithium ion battery.
Li Ion BATT
032378o
Safety Information
75
If you have experienced seizures or blackouts, or if you have a
family history of such occurrences, please consult with your
physician before playing video games or enabling a flashing-lights
feature (if available) on your phone.
Symbol
Definition
Do not let your battery,
charger, or phone get wet.
Discontinue use and consult a physician if any of the following
symptoms occur: convulsion, eye or muscle twitching, loss of
awareness, involuntary movements, or disorientation. It is always
a good idea to hold the screen away from your eyes, leave the
lights on in the room, take a 15-minute break every hour, and stop
use if you are very tired.
Listening at full volume to
music or voice through a
headset may damage your
hearing.
Choking Hazards
Your portable radio or its accessories may include detachable
parts, which may present a choking hazard to small children. Keep
your device and its accessories away from small children.
Caution About High Volume Usage
Listening at full volume to music or voice through a
headset may damage your hearing.
Glass Parts
Some parts of your phone may be made of glass. This glass could
break if the product is dropped on a hard surface or receives a
substantial impact. If glass breaks, do not touch or attempt to
remove. Stop using your phone until the glass is replaced by a
qualified service center.
Repetitive Motion
When you repetitively perform actions such as pressing keys or
entering finger-written characters, you may experience occasional
discomfort in your hands, arms, shoulders, neck, or other parts of
your body. If you continue to have discomfort during or after such
use, stop use and see a physician.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts
when exposed to flashing lights, such as when playing video
games. These may occur even if a person has never had a previous
seizure or blackout.
Safety Information
76
Service & Repairs
If you have questions or need assistance, we’re here to help.
Motorola Customer Support Center at 1-800-453-0920 (United
States), 1-877-483-2840 (TTY/TDD United States for hearing
impaired).
number of customer care options. You can also contact the
Export Law Assurances
Export Law
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation
or re-exportation of this product to certain destinations. For further
information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Export Law
77
Specific Absorption Rate Data
ALL MODELS WITH FCC ID IHDT56HG2 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO
WAVES.
general, the closer you are to a wireless base station antenna, the
lower the power output.
Before a phone model is available for sale to the public, it must be
tested and certified to the FCC that is does not exceed the limit
established by the government-adopted requirement for safe
exposure. The tests are performed in positions and locations (e.g.,
at the ear and worn on the body) as required by the FCC for each
model. The highest SAR value for this model phone when tested
for use at the ear is 1.53 W/kg and when tested on the body, as
described in this user guide, is 1.55 W/kg during packet data
transmission. (Body-worn measurements differ among phone
models, depending upon available accessories and FCC
requirements.)2
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government. These limits
are part of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The guidelines are
based on standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial safety
margin designed to assure the safety of all persons, regardless of
age and health.
While there may be differences between the SAR levels of various
phones and at various positions, they all meet the government
requirement for safe exposure. Please note that improvements to
this product model could cause differences in the SAR value for
later products; in all cases, products are designed to be within the
guidelines.
The exposure standard for wireless mobile phones employs a unit
of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/kg.1 Tests for SAR are
conducted using standard operating positions reviewed by the FCC
with the phone transmitting at its highest certified power level in
all tested frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the phone
while operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power levels
so as to use only the power required to reach the network. In
Additional information on Specific Absorption Rates (SAR) can be
found on the Cellular Telecommunications Industry Association
Telecommunications Association (CWTA) Web site:
Export Law
78
1. In the United States and Canada, the SAR limit for mobile
phones used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial margin
of safety to give additional protection for the public and to account
for any variations in measurements.
2. The SAR information includes the Motorola testing protocol,
assessment procedure, and measurement uncertainty range for
this product.
Export Law
79
Motorola Limited Warranty for the United States and
Canada
Warranty
consumers in the United States or Canada, which are
What Does this Warranty Cover?
accompanied by this written warranty:
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES
AND SOFTWARE PURCHASED IN THE UNITED STATES OR
CANADA
Products Covered
Length of Coverage
Products as defined
above.
One (1) year from the date of
purchase by the first consumer
purchaser of the product.
What Does this Warranty Cover?
Subject to the exclusions contained below, Motorola, Inc. warrants
its Motorola iDEN Digital Mobile and Portable Handsets
("Products"), Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and Motorola software
contained on CD-Roms or other tangible media and sold for use
with these Products ("Software") to be free from defects in
materials and workmanship under normal consumer usage for the
period(s) outlined below. This limited warranty is a
Accessories as
defined above.
One (1) year from the date of
purchase by the first consumer
purchaser of the product.
Products or
The balance of the original
warranty or for ninety (90) days
from the date returned to the
consumer, whichever is longer.
Accessories that are
Repaired or
Replaced.
consumer's exclusive remedy, and applies as follows to
new Products, Accessories and Software purchased by
Warranty
80
commercial purposes or subjecting the Product or Accessory to
abnormal usage or conditions; or (d) other acts which are not the
fault of Motorola, are excluded from coverage.
Products Covered
Length of Coverage
Software as defined
above. Applies only to
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or floppy
disk).
Ninety (90) days from the date
of purchase.
Use of Non-Motorola Products and Accessories. Defects or
damage that result from the use of Non-Motorola branded or
certified Products, Accessories, Software or other peripheral
equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages
resulting from service, testing, adjustment, installation,
maintenance, alteration, including without limitation, software
changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from
coverage.
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance, repair and
replacement of parts due to normal wear and tear are excluded
from coverage.
Altered Products. Products or Accessories with (a) serial
numbers or date tags that have been removed, altered or
obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are excluded from
coverage.
Ornamental Decorations. Ornamental decorations such as
emblems, graphics, rhinestones, jewels, gemstones and their
settings, and other decorative elements, are excluded from
coverage.
Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by
this limited warranty.
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication
service or signal you may subscribe to or use with the Products,
Accessories or Software is excluded from coverage.
Abuse & Misuse. Defects or damage that result from: (a)
improper operation, storage, misuse or abuse, accident or neglect,
such as physical damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with liquid, water,
rain, extreme humidity or heavy perspiration, sand, dirt or the like,
extreme heat, or food; (c) use of the Products or Accessories for
Software Embodied in Physical Media. No warranty is made
that the software will meet your requirements or will work in
combination with any hardware or software applications provided
by third parties, that the operation of the software products will be
Warranty
81
uninterrupted or error free, or that all defects in the software
products will be corrected.
copy of your receipt, bill of sale or other comparable proof of
purchase; (b) a written description of the problem; (c) the name of
your service provider, if applicable; (d) the name and location of the
installation facility (if applicable) and, most importantly; (e) your
address and telephone number.
Software NOT Embodied in Physical Media. Software that is
not embodied in physical media (e.g. software that is downloaded
from the internet), is provided "as is" and without warranty.
What Other Limitations Are There? ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Who is covered? This warranty extends only to the first
consumer purchaser, and is not transferable.
What will Motorola Do? Motorola, at its option, will at no
charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to
your Product, Accessory or Software, including but not limited to
personal contacts, games and ringer tones, will be reinstalled. To
avoid losing such data, software and applications please create a
back up prior to requesting service.
How to Obtain Warranty Service or Other Information? To
obtain service or information, please call:
Motorola iDEN Customer Services 1-800-453-0920 or
954-723-4910
TTY-877-483-2840
Some states and jurisdictions do not allow the limitation or
exclusion of incidental or consequential damages, or limitation on
the length of an implied warranty, so the above limitations or
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a
Warranty
82
exclusions may not apply to you. This warranty gives you specific
legal rights, and you may also have other rights that vary from
state to state or from one jurisdiction to another.
c.Should the Product or parts become, or in MOTOROLA'S opinion
be likely to become, the subject of a claim of infringement of a
United States patent, that such purchaser will permit MOTOROLA,
at its option and expense, either to procure for such purchaser the
right to continue using the Product or parts or to replace or modify
the same so that it becomes non-infringing or to grant such
purchaser a credit for the Product or parts as depreciated and
accept its return. The depreciation will be an equal amount per
year over the lifetime of the Product or parts as established by
MOTOROLA.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola
software such as the exclusive rights to reproduce and distribute
copies of the Motorola software. Motorola software may only be
copied into, used in, and redistributed with, the Products
associated with such Motorola software. No other use, including
without limitation disassembly of such Motorola software or
exercise of the exclusive rights reserved for Motorola, is
permitted.
MOTOROLA will have no liability with respect to any claim of
patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will MOTOROLA have
any liability for the use of ancillary equipment or software not
furnished by MOTOROLA which is attached to or used in
connection with the Product or any parts thereof.
Patent and Software Provisions
MOTOROLA will defend, at its own expense, any suit brought
against the end user purchaser to the extent that it is based on a
claim that the Product or parts infringe a United States patent, and
Motorola will pay those costs and damages finally awarded
against the end user purchaser in any such suit which are
attributable to any such claim, but such defense and payments are
conditioned on the following:
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA
software, such as the exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software. MOTOROLA
software may be used in only the Product in which the software
was originally embodied and such software in such Product may
not be replaced, copied, distributed, modified in any way, or used
to produce any derivative thereof. No other use including, without
limitation, alteration, modification, reproduction, distribution, or
reverse engineering of such MOTOROLA software or exercise or
rights in such MOTOROLA software is permitted. No license is
a.That MOTOROLA will be notified promptly in writing by such
purchaser of any notice of such claim;
b.That MOTOROLA will have sole control of the defense of
such suit and all negotiations for its settlement or
compromise; and
Warranty
83
granted by implication, estoppel or otherwise under MOTOROLA
patent rights or copyrights.
Warranty
84
Hearing Aid Compatibility
HAC
A number of Motorola phones have been tested for hearing aid
“M” Rating: Phones rated M3 or M4 meet FCC requirements for
hearing aid compatibility and are likely to generate less
interference to hearing aids than unrated phones. (M4 is the
“better” or higher of the two ratings.) On those models with an
extendable antenna, this rating is determined only with the
antenna extended.
compatibility. When some wireless phones are used with certain
hearing aids, users may detect a noise which can interfere with
the effectiveness of the hearing aid.
Some hearing aids are more “immune” than others to this
interference noise, and phones can also vary in the amount of
interference noise they may generate. ANSI standard C63.19 was
developed to provide a standardized means of measuring both
mobile phone and hearing aids to determine usability rating
categories for both.
“T” Rating: Phones rated T3 or T4 meet FCC requirements and are
likely to be more usable with a hearing aid's telecoil (“T Switch” or
“Telephone Switch”) than unrated phones. (T4 is the “better” or
higher of the two ratings.) On those models with a telecoil mode
setting, this rating is determined only with the phone so set. For
setting instructions, see “Features for the Hearing Impaired” in the
section entitled “Advanced Calling Features”. Note that not all
hearing aids have telecoils in them.
Ratings have been developed for mobile phones to assist hearing
aid users find phones that may be compatible with their hearing
aid. Not all phones have been rated for compatibility with hearing
aids. Phones that have been rated have a label with the rating(s)
Hearing aids may also be measured for immunity to interference
from wireless phones and may have ratings similar to wireless
phones. Ask your hearing health care professional for the rating of
your hearing aid. Add the rating of your hearing aid and your phone
to determine the estimated usability:
These ratings are not guarantees of compatibility. Results will vary
depending on the user's hearing aid and individual type and degree
of hearing loss. If a hearing aid is particularly vulnerable to
interference, even a phone with a higher rating may still cause
unacceptable noise levels in the hearing aid Trying out the phone
with your hearing aid is the best way to evaluate it for your
personal needs.
•
Any combined rating equal to or greater than six offers
excellent use.
•
Any combined rating equal to five is considered normal
use.
HAC
85
•
Any combined rating equal to four is considered usable.
Thus, if you use an M3 phone with a M3 hearing aid you will have
a combined rating of six for “excellent use.” This methodology
applies equally for T ratings.
More information about hearing aid compatibility may be found at:
HAC
86
Information From the World Health Organization
WHO Information
Present scientific information does not indicate the need for any
special precautions for the use of mobile phones. If you are
concerned, you may want to limit your own or your children’s RF
exposure by limiting the length of calls or by using hands-free
devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Product Registration
Registration
Online Product Registration:
Motosupport/source/registration.asp
Product registration is an important step toward enjoying your new
Motorola product. Registering helps us facilitate warranty service,
and permits us to contact you should your product require an
update or other service. Registration is for U.S. residents only and
is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For
warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt
to confirm warranty status.
Thank you for choosing a Motorola product.
WHO Information
87
Wireless: The New Recyclable
Recycling
Your wireless phone can be recycled. Recycling your phone
As a phone user, you have an important role in ensuring that this
device is recycled properly. When it comes time to give this phone
up or trade it in for a new one, please remember that the phone,
the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at:
reduces the amount of waste disposed in landfills and allows
recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and
its members encourage consumers to recycle their phones and
have taken steps to promote the collection and environmentally
sound recycling of end-of-life devices.
California Perchlorate Label
Perchlorate Label
Some mobile phones use an internal, permanent backup battery on
the printed circuit board that may contain very small amounts of
perchlorate. In such cases, California law requires the following
label:
“Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.”
There is no special handling required by consumer.
Recycling
88
Patent and Trademark Information
Patent and Trademark
MOTOROLA, the Stylized M Logo and all other trademarks
Software Copyright Notice
indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2007 Motorola, Inc. All rights reserved.
The Motorola products described in this manual may include
copyrighted Motorola and third party software stored in
semiconductor memories or other media. Laws in the United
States and other countries preserve for Motorola and third party
software providers certain exclusive rights for copyrighted
software, such as the exclusive rights to distribute or reproduce
the copyrighted software. Accordingly, any copyrighted software
contained in the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in any manner to
the extent allowed by law. Furthermore, the purchase of the
Motorola products shall not be deemed to grant either directly or
by implication, estoppel, or otherwise, any license under the
copyrights, patents, or patent applications of Motorola or any third
party software provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation of law in the
sale of a product.
Microsoft and Microsoft Internet Explorer are registered
trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9® Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered
trademarks of Sun Microsystems, Inc. in the U.S. and other
countries.
All other product names or services mentioned in this manual are
the property of their respective trademark owners.
Patent and Trademark
89
Privacy and Data Security
Privacy and Data Security
Motorola understands that privacy and data security are important
•
Understanding AGPS: In order to comply with
to everyone. Because some features of your phone may affect your
privacy or data security, please follow these recommendations to
enhance protection of your information:
emergency caller location requirements of the FCC, certain
Motorola phones incorporate Assisted Global Positioning
System (AGPS) technology. AGPS technology also can be
used in non-emergency applications to track and monitor a
user’s location, for example, to provide driving directions.
Users who prefer not to permit such tracking and
•
Monitor access: Keep your phone with you and do not
leave it where others may have unmonitored access. Lock
your device’s keypad where this feature is available.
monitoring should avoid using such applications.
•
Keep software up to date: If Motorola or a
software/application vendor releases a patch or software
fix for your phone which updates the device’s security,
install it as soon as possible.
If you have further questions regarding how use of your phone may
impact your privacy or data security, please contact Motorola at
[email protected], or contact TELUS Client Care..
•
Erase before recycling: Delete personal information or
data from your phone prior to disposing of it or turning it in
for recycling. For step-by-step instructions on how to
delete all personal information from your device, please
contact your local service provider.
Privacy and Data Security
90
Smart Practices While Driving
Driving Safety
Drive Safe, Call Smart SM
road. If you receive an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
Check the laws and regulations on the use of phones and
their accessories in the areas where you drive. Always
obey them. The use of these devices may be prohibited or
restricted in certain areas. Go to www.motorola.com/callsmart
for more information.
Your phone lets you communicate by voice and data, almost
anywhere, anytime, wherever wireless service is available and
safe conditions allow. When driving a car, driving is your first
responsibility. If you choose to use your phone while driving,
remember the following tips:
•
•
•
Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet,
snow, ice, and even heavy traffic can be hazardous.
Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your
address book takes attention away from your primary
responsibility, driving safely.
Dial sensibly and assess the traffic; if possible,
place calls when your car is not moving or before
pulling into traffic. If you must make a call while
moving, dial only a few numbers, check the road and your
mirrors, then continue.
•
Get to know your Motorola phone and its features
such as speed dial and redial. If available, these
features help you to place your call without taking your
attention off the road.
•
When available, use a hands-free
device. If possible, add an additional
layer of convenience to your phone with
one of the many Motorola Original
hands-free accessories available today.
•
•
Do not engage in stressful or emotional
conversations that may be distracting. Make people
you are talking with aware you are driving and suspend
conversations that can divert your attention away from the
road.
•
Position your phone within easy reach. Be able to
access your phone without removing your eyes from the
Use your phone to call for help. Dial 911 or other local
emergency number in the case of fire, traffic accident, or
medical emergencies.**
Driving Safety
91
•
•
Use your phone to help others in emergencies. If you
see an auto accident, crime in progress, or other serious
emergency where lives are in danger, call 911 or other
local emergency number, as you would want others to do
for you.**
Call roadside assistance or a special
non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you
know to be stolen, call roadside assistance or other
special non-emergency wireless number.*
*
Wherever wireless phone service is available.
Driving Safety
92
Index
send information 37
setting your phone 35
turning on or off 35
bluetooth 35
contacts 65
A
accessories 9, 25, 67
active phone line 40
advanced calling 64
3-way calls 64
alert
D
datebook 65
receive events via PTT 66
setup 62
dial a phone number 15
dialed calls 47
display 39
C
call
answer 15
end 15
make 15
set 61
turn off 43
answer a call 15
Drafts 22
call forward 49
caller ID 49
calls 47
center key 43
center select key 9
clock 68
B
E
backlight 61, 68
battery 10, 12, 13
life, extend 10
battery indicator 40
Bluetooth
earpiece volume 43
emergency number 50
end a call 15
export regulations 77
combined power/end/home
key 14, 15
connect 35
Index
93
F
L
O
frequently asked questions
service and repairs 77
language 68
low battery message 40
optional accessory 9, 67
optional feature 9
G
M
P
GPS 66
GPS enabled
emergency calls 50
GPS, see GPS enabled
make a call 15
Memory
packet data 40
PC applications 68
personalize 68
phone number 19
private calls
answer 17
call alerts 16
make 15
text messages 23
Message center
text messages 21
message indicator 40
messages 68
fax mail indicator 53
modem
H
handsfree 67
handsfree speaker 43
Hearing Aid Compatibility 85
home screen 39
using your handset
as a 23
receive a call alert 17
PT manager 32
PTT 26
I
N
incoming call message 49
international calls 50, 52
iTAP text entry mode 41
Q
navigation key 9, 43
net alerts 53
quick notes
create, edit 20, 22
Index
94
memory 23
message center 21
receiving 20
resend messages 22
sending 21
sent messages 22
setting up 19
transmitters 43
TTY calls 68
R
change SIM PIN 69
enable SIM PIN 69
soft keys 39
speaker 40, 66
speed dial 51
radio frequency 72
received calls 47
recent calls 47
recycling 88
redial 48
ring style indicator 40
ring tones
store your number 19
T
off 60, 61
setting 60
turn on/off 14
Talk Around
channels 55
codes 55
emergency calls 58
private Talk
Around calls 57
setup options 58
tap text entry mode 42
text entry 40
text messages 19, 23
creating 21
vibrate 60, 61
ringer volume 43
V
voice mail
advance voice mail with
fax 52
receiving 52
setting up 52
voice names 48
voicemail 52
volume 43
S
safety
radio frequency 72
RF energy interference 73
safety information 72
safety tips 91
security 69
send key 15
deleting 22, 23
drafts 22
Index
95
W
wallpaper 61
WHO information 87
wireless web 32
microbrowser
navigation 33
Y
your phone number 19
Index
96
|